Bass Stop Tailpiece - Chrome

Bass stop tailpiece, with studs and anchors, 3-1/4" stud spacing.

Bass Tunematic - Chrome

Bass tunematic, with hardware, 2-3/16" string spacing, 3-5/16" post spacing.

Ruby Tubes - JJ EL84 (matched pair)

Experience superior quality and affordability with the JJ EL84. Boasting the power and reliability similar to the GE6BQ5, this tube offers exceptional sound at a fraction of the cost. A must-have for any audiophile or musician looking for top-notch...

Ruby Tubes - JJ 6V6S (matched pair)

Experience improved tone in your amp with JJ 6V6GTCZ tubes. From clearer bass to rich highs with a chime, these tubes cater to all music styles. They provide a smooth distortion when pushed, easily customizable for your desired tone. All RUBY™...

Ruby Tubes - JJ 6L6GC (matched pair)

The JJ 6L6 is a beam power pentode with an octal base and power of 30W for use in 6L6 amplifiers. It has a lot of headroom and a heavy, solid tone. Thanks to its robust construction it is very reliable. It features superior dynamic response for...

Ruby Tubes - JJ GZ34S / 5AR4

The JJ GZ34/5AR4 Rectifier Tube is a cost-effective and reliable replacement for amplifiers using GZ34/5AR4 tubes. With its high-quality construction and exceptional sound, this tube is a great choice for any amplifier. Upgrade your equipment with this...

Ruby Tubes - 5Y3GT

5Y3GT is an octal rectifier diode with a true directly heated cathode. Expert-designed for ultimate reliability and efficiency, this octal rectifier diode boasts a true directly heated cathode to deliver dynamic and robust performance. All Ruby Tubes...

Ruby Tubes - JJ ECC83S / 12AX7

JJ ECC83S / 12AX7 HG tested The JJ ECC83S / 12AX7 Preamp Vacuum Tubes provide harmonically rich sound with low noise and microphonics. With its balanced midrange, it brings exceptional clarity and warmth to any amplifier, allowing for a detailed low end...

Ruby Tubes - JJ EC881 / 12AT7

JJ 12AT7 / ECC81 HG tested The JJ ECC81 tube also refereed to as a 12AT7, is known for its warm and smooth sound, making it a popular choice among musicians and audiophiles. It was widely used in vintage audio equipment and can still be found in some...

Inlay Dots - 1/4" Mother of Pearl (pkg 20)

*Please note: Due to the organic nature of this material, the colour can vary between pieces, even within the same pack of 20pcs. Genuine mother of pearl inlay dots.  Nominally 1/4 inch (diameter actually measures 6.35mm-6.55mm with 2-2.5mm...

Gibson Fine-Tuning Tailpiece - Gold

A direct retrofit for the original Gibson stopbar, the TP-6 fine-tuning tailpiece delivers the ability to fine tune any string on your guitar in seconds. Micro-adjustment tuners and carefully crafted gears and saddles allows for smooth string movement...

Steinberger Gearless Tuner Set - Chrome

Steinberger's unique "straight-through" tuner has no gears, and an astounding 40:1 tuning ratio for unparalleled accuracy. Straight string pull eliminates winding. The locking knob on top secures the string to prevent slippage. String installation is...

Gibson Humbucker Ring - Bridge (cream)

A full-size bridge position humbucker pickup ring made from ABS plastic and identical to the OEM rings found on many vintage and modern day Gibson guitars. Sold individually. Includes 4x mounting screws. Features Bottom/Top: Flat Bottom / Slanted...

MG Chemicals - Super Shield Paint (55mL)

MADE IN CANADA This EMF shielding paint is a 1-part, water-based conductive coating, pigmented with highly conductive nickel flake. Unlike diamagnetic conductive fillers like carbon, copper, or silver that only shield the electric component of...

3.5mm Plug - Straight Stereo

3.5mm stereo plug.  Strain relief portion is shrinkable with a heat gun. Fits on 2-Conductor Shielded Wire, for a small and flexible design.

3.5mm Plug - Straight Mono

3.5mm mono plug.  Strain relief portion is shrinkable with a heat gun. Fits on our 20AWG Mini Cable, for a robust 3.5mm cable.  Also fits on 26AWG Coax Wire, for a smaller and more flexible option.

Tee Nuts - #8-32

Used in combination with #8-32 machine screws for mounting various parts to cabinets. Thread: #8-32Length FMS: 1/4" Sold individually.

Hammond 290BXX - Power Transformer

MADE IN CANADA Vertical version of 290BX.  Replacement for (Deluxe, 5A3, 5B3, 5C3, 6G3, AB763) (Deluxe Reverb, A1172, A1270, AA763, AB763, AB868, Blackface, Silverface, W/Volume Boost) Tweed Tremolux. *Note: Not a drop-in replacement for any of...

Hipshot GB7 - Bass Xtender (choose options)

Retrofits Gotoh GB7 tuning machines. Requires 9/16" headstock tuner hole to be fitted properly.

Gotoh GB350 - Res-o-lite Bass Tuners - Gold (choose side)

MADE IN JAPAN Gotoh's GB350 Res-O-Lite bass tuners are a fantastic upgrade in quality and appearance.  By chiefly using the special alloy “duralumin”, excellent weight savings are achieved to avoid neck dive and impact on your shoulders...