Pickup Parts & Winding

10 Hole Keeper Bar - 49.2mm CLEARANCE

10-hole keeper bar.  Permeable zinc-plated steel.  49.2mm spacing. See alternate photo for dimensional drawing.

10 Hole Keeper Bar - 50mm CLEARANCE

10-hole keeper bar.  Permeable zinc-plated steel.  50mm spacing. See alternate photo for dimensional drawing.

10 Hole Keeper Bar - 52mm CLEARANCE

10-hole keeper bar.  Permeable zinc-plated steel.  52mm spacing. See alternate photo for dimensional drawing.

Aluminum Foil - Black CLEARANCE

Anodized aluminum foil for making foil pickups.  0.6mm thick. Sold individually. See alternate photo for dimensional drawing.

Aluminum Foil - Blue CLEARANCE

Anodized aluminum foil for making foil pickups.  0.6mm thick. Sold individually. See alternate photo for dimensional drawing.

Aluminum Foil - Gold CLEARANCE

Anodized aluminum foil for making foil pickups.  0.6mm thick. Sold individually. See alternate photo for dimensional drawing.

Aluminum Foil - Pink CLEARANCE

Anodized aluminum foil for making foil pickups.  0.6mm thick. Sold individually. See alternate photo for dimensional drawing.

Aluminum Foil - Silver CLEARANCE

Anodized aluminum foil for making foil pickups.  0.6mm thick. Sold individually. See alternate photo for dimensional drawing.

Bar Magnet - AlNiCo 2 CLEARANCE

Polished Grade 2 AlNiCo (Aluminum/Nickel/Cobalt) bar magnets for making humbuckers, P90s, and other pickups. Dimensions: 62mm x 12.5mm x 3mm (2.44" x 0.49" x 0.118") These ship fully magnetized. Sold individually.

Bar Magnet - AlNiCo 3 CLEARANCE

Polished Grade 3 AlNiCo (Aluminum/Nickel/Cobalt) bar magnets for making humbuckers, P90s, and other pickups. Dimensions: 62mm x 12.5mm x 3mm (2.44" x 0.49" x 0.118") These ship fully magnetized. Sold individually.

Bar Magnet - AlNiCo 4 CLEARANCE

Polished Grade 4 AlNiCo (Aluminum/Nickel/Cobalt) bar magnets for making humbuckers, P90s, and other pickups. Dimensions: 62mm x 12.5mm x 3mm (2.44" x 0.49" x 0.118") These ship fully magnetized. Sold individually.

Bar Magnet - AlNiCo 5 (for strat blade pickups) CLEARANCE

AlNiCo 5 bar magnets for making single-coil sized blade pickups, and other pickups. Dimensions: 57mm x 6.5mm x 5mm (2.242" x 0.256" x 0.197") These ship fully magnetized. Sold individually.

Bar Magnet - AlNiCo 5 CLEARANCE

Polished Grade 5 AlNiCo (Aluminum/Nickel/Cobalt) bar magnets for making humbuckers, P90s, and other pickups.  A5 has been the primary grade used in pickups worldwide for many decades. Dimensions: 62mm x 12.5mm x 3mm (2.44" x 0.49" x 0...

Bar Magnet - AlNiCo 8 CLEARANCE

Rough cast grade 8 AlNiCo (Aluminum/Nickel/Cobalt) bar magnets for making humbuckers, P90s, and other pickups.  A8 magnets are very strong when fully charged, providing an aggressive attack with lots of punch. Dimensions: 62mm x 12.5mm x 3mm (2...

Bar Magnet - Ceramic 8 (for strat blade pickups) CLEARANCE

Grade 8 ceramic bar magnets for making single-coil sized blade pickups, and other pickups. Dimensions: 57mm x 6.5mm x 5mm (2.242" x 0.256" x 0.197") These ship fully magnetized. Sold individually.

Bar Magnet - Ceramic 8 CLEARANCE

Grade 8 ceramic bar magnets for making humbuckers, P90s, and other pickups. Dimensions: 62mm x 12mm x 3mm (2.44" x 0.472" x 0.118") These ship fully magnetized. Sold individually.

Bar Magnet - Neodymium (for strat blade pickups) CLEARANCE

Neodymium N35 bar magnets for making single-coil sized blade pickups, and other pickups. Dimensions: 57mm x 6.5mm x 5mm (2.242" x 0.256" x 0.197") These ship fully magnetized. Sold individually.

Bar Magnet - Neodymium CLEARANCE

N35 grade Neodymium rare earth magnets, custom charged specifically for making humbuckers, P90s, and other pickups.  In the standard magnet position, it will significantly increase output, punch, and clarity.  When placed below the baseplate on...

Bass/P90 Pickup Screws - #3x1.25", Phillips, Round, Gold

Most commonly used for mounting P90 and bass pickups. Thread: #3Length FMS: 1 1/4"Head: RoundDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry.  Don't just go by...

Bass/P90 Pickup Screws - #3x1.38", Phillips, Round, Black

Most commonly used for mounting P90 and bass pickups. Thread: #3Length FMS: 1 3/8"Head: RoundDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry.  Don't just go...