Tube Accessories

Belton - 8 Pin Octal Tube Socket (solder)

High insulated 8-pin tube socket commonly used for octal power tubes. Fits into a 1 3/16" chassis hole with bolt/rivet spacing of 1 7/16" to 1 11/16". Applicable for use in all types of electric and electronic equipment using vacuum tubes...

Belton - 9 Pin Mini Tube Socket (solder)

9 pin miniature Belton socket. Applicable for use with all types of electric and electronic equipment using vacuum tubes. Paddle saddle mounting Phosphorous bronze pin terminal with tin plating Glassfiber filled PPS Insulating material Easy mount...

Belton - 9 Pin Mini Tube Socket With Shield Base (solder)

9 pin miniature Belton socket. Applicable for use with all types of electric and electronic equipment using vacuum tubes.  Commonly used for preamp tubes or EL84 power tubes Includes shield base already attached Phosphorous bronze pin terminal...

Belton Tube Clip - For Octal

Grips tube base with 'teeth' to securely hold tube in place. For use with octal sockets with 1-½" mounting centers. Super high quality. Spring plate with Nickel plating.

Belton Tube Retainer - For EL84s Tubes

Retainer (Belton). for use with EL84 tubes, mounts to chassis. Steel plate with nickel plating and natural coil spring. Note: These retainers are for specialized socket below-chassis mounting. (See mounting drawing below.) The springs are too short for...

Belton Tube Shield with Base - For 9-pin, Aluminum

Protect your preamp tubes with these professional aluminum tube shields. Mates with 9-pin tube sockets. Includes shield, base, and spring.

Ceramic - 8 Pin Octal Tube Socket (solder)

Ceramic Tube socket used for octal power tubes. Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”) Mounting Centers: 1-1/2” with oblong mounting holes See alternate photo for...

Ceramic - 9 Pin Mini Tube Socket (solder)

Ceramic tube socket commonly used for preamp tubes or EL84 power tubes. Chassis hole: 7/8” Mounting Centers: 1-1/8” Bottom or top mount See alternate photo for dimensional drawing.

Rubber Ring For EL34/5881 and 6L6GC Tuber Retainers

Rubber ring for retainer CE-S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"

Rubber Ring For KT88 and 6550 Tube Retainers

Rubber ring for retainer CE-S-H143 fits KT88 and 6550 tubes. Dampens vibration.

Socket Saver - 9 Pin Mini Tube Socket (straight lugs)

9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.

Solid State Rectifier - For 5AR4, 5U4, 5Y3 Tubes

Solid State Rectifier Direct plug-in replacement for 5AR4, 5U4 and 5Y3 rectifier vacuum tubes in amplifiers with center tapped secondary power transformer. Use when less 'sag' is desired in the power supply; just switch back to the tube rectifier when...

Tube Retainer - For 12AX7 Tubes

Mounting Centers = 1", Overall Height = 2.2". Keeps common preamp tubes in place while dampening vibrations to reduce microphonics. Supports a maximum tube height of 2.1 inches

Tube Retainer - For EL34/5881 and 6L6GC Tubes

For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.

Tube Retainer - For EL84 Tubes

Tube retainer for EL84. for use with guitar amps and applications where the tube is suspended upside down in the chassis. Supports a maximum tube height of 2.8 inches

Tube Retainer - For EL84 Tubes (Marshall Style)

Retainer for EL84 tubes. For use with guitar amps and applications where the tube is suspended upside down in the chassis. This style of EL84 retainer was popularly used in vintage 18W Marshall amps. The two brackets mount using the socket’s...

Tube Retainer - For KT88/6550 Tubes

For use with guitar amps and applications where KT88/6550 is suspended upside down in the chassis.