Next Gen Parts

Truss Rod Nut for Gibson

Made in USA Acom style raw brass truss rod nut with #10-32 thread.  5/16" wrench required. Sold individually.  Buy in bulk to save $$$$.

Knob Position Indicator - Blunt/Round Tip, Gold

Made in USA Vintage 90 degree blunt tip knob pointer washer made from steel.  This is a replacement for instruments requiring the *vintage correct appearance of the pointer washer under the...

Deep Nut - Coarse Knurl, Gold for Switchcraft Switches (15/32"-32)

Made in USA Deep thread nut with coarse knurling for use with Switchcraft switches. Used on some models of Gibson® guitars and other brands where the threading of the switch isn’t able to...

Deep Nut - Coarse Knurl, Nickel for Switchcraft Switches (15/32"-32)

Made in USA Deep thread nut with coarse knurling for use with Switchcraft switches. Used on some models of Gibson® guitars and other brands where the threading of the switch isn’t able to...

Self-Adhesive Acoustic Teardrop Pickguard - Thin Black Pearloid

Thin tear-drop shaped acoustic pickguard with adhesive backing.  Fits Martin D28 and other similar sized guitars/soundholes. Measurements: 178mm x 99mm x 0.7mm thick with a 62mm radius Please...

Self-Adhesive Acoustic Teardrop Pickguard - Thin White Pearloid

Thin tear-drop shaped acoustic pickguard with adhesive backing.  Fits Martin D28 and other similar sized guitars/soundholes. Measurements: 178mm x 99mm x 0.7mm thick with a 62mm radius Please...

Self-Adhesive Acoustic Teardrop Pickguard - Thin Modern Tortoise

Thin tear-drop shaped acoustic pickguard with adhesive backing.  Fits Martin D28 and other similar sized guitars/soundholes. Measurements: 178mm x 99mm x 0.7mm thick with a 62mm radius Please...

Self-Adhesive Acoustic Teardrop Pickguard - Thin Black

Thin tear-drop shaped acoustic pickguard with adhesive backing.  Fits Martin D28 and other similar sized guitars/soundholes. Measurements: 178mm x 99mm x 0.7mm thick with a 62mm radius Please...

Pickguard - Precision Bass 13-Hole (choose colour)

These should be a good fit on MOST genuine Fender® 4-string American Precision Bass, American Standard and Mexico Standard Precision Bass models (after 1970s).  We say "most" because...

Pickguard - Jazz Bass 10-Hole (choose colour)

These should be a good fit on MOST genuine Fender® 4-string American, American Standard, American Vintage, Standard and Deluxe series Jazz Bass models.  We say "most" because there...

Hot Rod Low Profile Truss Rod - 310mm

Low profile dual action truss rod with a hex nut.  Allows for both forward and backward adjustments of the truss rod.  Much more versatile than older style single action truss rods...

Hot Rod Low Profile Truss Rod - 360mm

Low profile dual action truss rod with a hex nut.  Allows for both forward and backward adjustments of the truss rod.  Much more versatile than older style single action truss rods...

Hot Rod Low Profile Truss Rod - 460mm

Low profile dual action truss rod with a hex nut.  Allows for both forward and backward adjustments of the truss rod.  Much more versatile than older style single action truss rods...

Pickguard Blank - 4-ply Vintage Tortoise (11.5"x17")

4-ply plastic pickguard blank with celluloid top layer. Layers: White / Black / White / Vintage TortoiseDimensions: 11.5" x 17" x 0.090" (29.2cm x 43.2cm x 2.3mm) *Note: These are rough-cut blanks...

Pickguard Blank - 4-ply Black Pearloid (11.5" x 17")

4-ply plastic pickguard blank with celluloid top layer. Layers: Black / White / Black / Black PearloidDimensions: 11.5" x 17" x 0.090" (29.2cm x 43.2cm x 2.3mm) *Note: These are rough-cut blanks...

Pickguard Blank - 4-ply Grey Pearloid (11.5" x 17")

4-ply plastic pickguard blank with celluloid top layer. Layers: Black / White / Black / Grey PearloidDimensions: 11.5" x 17" x 0.090" (29.2cm x 43.2cm x 2.3mm) *Note: These are rough-cut blanks...

Washer - 8mm to 3/8" Conversion for Pots

Conversion washers used for fitting pots with 8mm bushings into 3/8" holes. Inner Diameter = 8mmLap/Edge Diameter = 9.5mm (3/8")Flat/Outer Diameter = 15mm See alternate photo for dimensional...

Saddle Intonation Screw - #6-32x1.25", Phillips, Pan, Stainless

Most commonly used on vintage barrel saddle telecasters for extending the intonation range.  Same thread/pitch as most US-spec strat and tele pickups, and CRL and Oak Grigsby switch mounting...

3-on-a-plate Tuners - Classic with White Buttons (chrome)

Classic 3-on-a-plate tuners.  A great replacement for your budget acoustic guitar, without a hefty price tag. 15:1 gear ratio 35mm pole spacing 6mm shaft diameter Bushings for 8.8mm...

3-on-a-plate Tuners - Classic with White Buttons (gold)

Classic 3-on-a-plate tuners.  A great replacement for your budget acoustic guitar, without a hefty price tag. 15:1 gear ratio 35mm pole spacing 6mm shaft diameter Bushings for 8.8mm...