Pickup Parts & Winding

Aluminum Foil - Black CLEARANCE

Anodized aluminum foil for making foil pickups.  0.6mm thick. Sold individually. See alternate photo for dimensional drawing.

Bar Magnet - AlNiCo 2 CLEARANCE

Polished Grade 2 AlNiCo (Aluminum/Nickel/Cobalt) bar magnets for making humbuckers, P90s, and other pickups. Dimensions: 62mm x 12.5mm x 3mm (2.44" x 0.49" x 0.118") These ship fully magnetized. Sold individually.

Bar Magnet - AlNiCo 5 (for strat blade pickups) CLEARANCE

AlNiCo 5 bar magnets for making single-coil sized blade pickups, and other pickups. Dimensions: 57mm x 6.5mm x 5mm (2.242" x 0.256" x 0.197") These ship fully magnetized. Sold individually.

Bar Magnet - Ceramic 8 (for strat blade pickups) CLEARANCE

Grade 8 ceramic bar magnets for making single-coil sized blade pickups, and other pickups. Dimensions: 57mm x 6.5mm x 5mm (2.242" x 0.256" x 0.197") These ship fully magnetized. Sold individually.

Bar Magnet - Ceramic 8 CLEARANCE

Grade 8 ceramic bar magnets for making humbuckers, P90s, and other pickups. Dimensions: 62mm x 12mm x 3mm (2.44" x 0.472" x 0.118") These ship fully magnetized. Sold individually.

Bar Magnet - Neodymium (for strat blade pickups) CLEARANCE

Neodymium N35 bar magnets for making single-coil sized blade pickups, and other pickups. Dimensions: 57mm x 6.5mm x 5mm (2.242" x 0.256" x 0.197") These ship fully magnetized. Sold individually.

Bass/P90 Pickup Screws - #3x1.25", Phillips, Round, Gold

Most commonly used for mounting P90 and bass pickups. Thread: #3Length FMS: 1 1/4"Head: RoundDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry.  Don't just go by...

Bass/P90 Pickup Screws - #3x1.38", Phillips, Round, Black

Most commonly used for mounting P90 and bass pickups. Thread: #3Length FMS: 1 3/8"Head: RoundDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry.  Don't just go...

Bass/P90 Pickup Screws - #3x1.38", Phillips, Round, Nickel

Most commonly used for mounting P90 and bass pickups. Thread: #3Length FMS: 1 3/8"Head: RoundDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry.  Don't just go...

Butyrate PAF Humbucker Bobbin - 49.2mm Black (screw side) CLEARANCE

Made in USA Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing. P.A.F. (Patent Applied For) refers to the humbucker...

Butyrate PAF Humbucker Bobbin - 49.2mm Black (slug side) CLEARANCE

Made in USA Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These slug side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing. P.A.F. (Patent Applied For) refers to the humbucker pickup...

Butyrate PAF Humbucker Bobbin - 49.2mm Cream (screw side) CLEARANCE

Made in USA Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing. P.A.F. (Patent Applied For) refers to the humbucker...

Butyrate PAF Humbucker Bobbin - 49.2mm Cream (slug side) CLEARANCE

Made in USA Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These slug side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing. P.A.F. (Patent Applied For) refers to the humbucker...

Eyelets - Small Tinned (pkg 10)

Tin plated brass eyelets, most commonly used on vintage style pickups.  The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes.  The outside diameter of the barrel is 0.089” and the recommended...

Flatwork - Strat Dual Blade (unthreaded) CLEARANCE

*CLEARANCE: There was a factory error during the manufacturing process.  The screw holes are pre-drilled, but NOT tapped/threaded.  So, unless you're direct-mounting them, you'll need to tap them (#6-32). Pro-grade, precision laser cut...

Flatwork - Strat Dual Blade CLEARANCE

Laser cut flatwork for making dual blade strat sized pickups. Specs Thickness:  2.4mm Fits perfectly with the rest of our strat "blade" parts: blades, magnets, bobbins, and covers. Eyelets sold separately Tapped for North American standard...

Humbucker Bobbin - 49.2mm Clear (screw side) CLEARANCE

ABS plastic humbucker bobbin for 49.2mm spacing.  Clear, screw side. Sold individually. See alternate photo for dimensional drawing.

Humbucker Bobbin - 49.2mm Clear (slug side) CLEARANCE

ABS plastic humbucker bobbin for 49.2mm spacing.  Clear, slug side. Sold individually. See alternate photo for dimensional drawing.

Humbucker Bobbin - 49.2mm Cream (screw side) CLEARANCE

ABS plastic humbucker bobbin for 49.2mm spacing.  Cream, screw side. Sold individually. See alternate photo for dimensional drawing. *Matching Cream Parts?  See our blog post regarding the frustrating truth about cream parts!

Humbucker Bobbin - 49.2mm Cream (slug side) CLEARANCE

ABS plastic humbucker bobbin for 49.2mm spacing.  Cream, slug side. Sold individually. See alternate photo for dimensional drawing. *Matching Cream Parts?  See our blog post regarding the frustrating truth about cream parts!