Pickup Parts & Winding

Humbucker Mounting Springs - 1"

Used in combination with humbucker mounting screws to mount humbuckers to humbucker mounting rings. Size: For #3 screws.Length (uncompressed): 1"Material: Plated Steel Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized...

Humbucker Pickup Spacer - Maple CLEARANCE

Maple spacer for making humbuckers. Dimensions: 54mm x 5.4mm x 3.0mm (~2 1/8" x ~7/32" x ~1/8").

Humbucker Pickup Spacer - Plastic CLEARANCE

Plastic spacer for making humbuckers. Dimensions: 49.4mm x 5.0mm x 3.0mm (~1 15/16" x ~3/16" x ~1/8").

Humbucker Pickup Spacer - Plated Steel CLEARANCE

Steel spacer for making humbuckers. Dimensions: 54.0mm x 5.0mm x 3.0mm (~2 1/8" x ~3/16" x ~1/8").

Humbucker Pole Piece Screws - #5-40x3/4", Slotted, Fillister, Gold

Made in USA Most commonly used as a humbucker pole screw. Thread: #5-40Length FMS: 3/4"Head: FillisterDrive: Slotted Sold individually.  Buy in bulk to save $$$$. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the...

Humbucker Slug - Gold CLEARANCE

Plated steel humbucker slug. 4.8mm x 12.5mm Sold individually.

Pickup Baseplate - For Humbucker 49.2mm (brass) CLEARANCE

Baseplate for humbucker pickups.  49.2mm spacing.  Brass.  Threaded for #3-48 screws. See alternate photo for dimensional drawing.

Pickup Baseplate - For Humbucker 49.2mm (nickel/silver) CLEARANCE

Baseplate for humbucker pickups.  49.2mm spacing.  Nickel/Silver.  Threaded for #3-48 screws. See alternate photo for dimensional drawing.

Pickup Mounting Screws - #6-32 x 3/4", Phillips, Pan, Gold

Most commonly used for mounting single coil pickups like Strat and Tele pickups.  Same thread/pitch as CRL and Oak Grigsby switch mounting screws. Thread: #6-32Length FMS: 3/4"Head: PanDrive: Phillips Sold individually. See NG-GPS-3036-NI for...

Pickup Mounting Screws - #6-32 x 3/4", Phillips, Round, Black

Most commonly used for mounting single coil pickups like Strat and Tele pickups.  Same thread/pitch as CRL and Oak Grigsby switch mounting screws. Thread: #6-32Length FMS: 3/4"Head: PanDrive: Phillips Sold individually. See NG-GPS-3036-NI for...

Pickup Mounting Screws - #6-32 x 3/4", Phillips, Round, Gold (bag of 134) CLEARANCE

Most commonly used for mounting single coil pickups like Strat and Tele pickups.  Same thread/pitch as CRL and Oak Grigsby switch mounting screws. Thread: #6-32Length FMS: 3/4"Head: PanDrive: Phillips Bag of 134pcs. See AP-GS-3036-B05 for springs...

Pickup Mounting Screws - #6-32x3/4", Phillips, Oval, Stainless

Most commonly used for mounting single coil pickups like Strat and Tele pickups.  Same thread/pitch as CRL and Oak Grigsby switch mounting screws. Thread: #6-32Length FMS: 3/4"Head: Countersunk / OvalDrive: Phillips Sold individually. See...

Pickup Mounting Screws - #6-32x3/4", Phillips, Pan, Stainless

Most commonly used for mounting single coil pickups like Strat and Tele pickups.  Same thread/pitch as CRL and Oak Grigsby switch mounting screws. Thread: #6-32Length FMS: 3/4"Head: PanDrive: Phillips Sold individually. See AP-GS-3036-B05 for...

Pickup Mounting Springs - 0.6"

Used in combination with pickup mounting screws to mount pickups.  Most commonly used on single coil pickups like Strat and Tele pickups. Size: For #6 screws.Length (uncompressed): 0.6"Material: Plated Steel Sold individually. Tech's notes:...

Pickup Mounting Tubing - By Foot

Latex rubber surgical tubing, just like they used on vintage Fenders instead of pickup springs.  Using this instead of springs reduces microphonic feedback and unwanted rattling from the metal springs. 1/8" inner diameter, 1/4" outer diameter...

Pickup Wire - 2-Conductor Shielded - By Foot

2-Conductor Shielded Wire for Pickups.  28AWG 7/36 white, black, and bare (drain) wire with a foil shield in a PVC jacket. Sold by the foot.Qty 1 = 12" longQty 3 = 36" long (3' long)Qty 10 = 120" long (10' long)etc. *Cannot guarantee continuous...

Pickup Wire - 4-Conductor Shielded - By Foot

4-Conductor Shielded Wire for Pickups. 28AWG white, black, green, red, and bare (drain) wire with a foil shield in a PVC jacket. Sold by the foot.Qty 1 = 12" longQty 3 = 36" long (3' long)Qty 10 = 120" long (10' long)etc. *Cannot guarantee continuous...

Rod Magnets - AlNiCo 2 Bevelled (choose size) CLEARANCE

Grade 2 AlNiCo (Aluminum/Nickel/Cobalt) rod magnets with bevelled edges for making pickups.  A2 was the primary grade used in the earliest magnetic pickup designs, and it remains a mainstay to this day in vintage voiced factory and boutique pickups...

Rod Magnets - AlNiCo 2 Flat (choose size) CLEARANCE

Grade 2 AlNiCo (Aluminum/Nickel/Cobalt) rod magnets with flat edges for making pickups.  A2 was the primary grade used in the earliest magnetic pickup designs, and it remains a mainstay to this day in vintage voiced factory and boutique pickups...

Rod Magnets - AlNiCo 5 Flat (choose size) CLEARANCE

Grade 5 AlNiCo (Aluminum/Nickel/Cobalt) rod magnets with flat edges for making pickups.  A5 has been the most commonly used rod magnet since the mid-1950's, used on bass and guitar pickups of all types and for all styles of instruments. Available...