Eminence Legend B810 - 150W 32ohm

Bass Guitar! Small Sealed enclosures. Use in multiples. SPECIFICATIONS Nominal size: 10", 254.0 mm Nominal Impedance: 32 ohms Power: 150w rms, 300w program Freq. Response: 49.0 Hz-5.1 kHz Sensitivity: 93.0 db 1w/1m Magnet Weight: 30.0 oz, 851.0...

Eminence Basslite S2010 - 150W 8ohm

Recommended for bass guitar. Ideal in vented 1X, 2X, and 4 X10 enclosures. SPECIFICATIONS Nominal Diameter: 10", 254.0 mm Nominal Impedance: 8 ohms Power: 150w rms, 300w program Freq. Response: 54.0 Hz-4.0 kHz Sensitivity: 96.2 db 1w/1m Magnet...

Wide Strap Handle - Nickel End Caps

Wide strap handle with nickel end caps. Steel reinforced rubber handle. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same...

Wide Strap Handle - Black End Caps

Wide strap handle with black end caps. Steel reinforced rubber handle. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer...

Tapered Rubber Feet - Large (Pkg 4)

Large tapered rubber feet for amps/cabs. Metal washer insert for strength and stability. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by...

Jack Plate - 1/4" Square Black Metal

Square jack plate for 1/4" jack. 4.02" x 4.40" Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer to the same specs as...

Jack Plate - Dual 1/4" Square Black Metal

Square jack plate for two 1/4" jacks. 4.02" x 4.40" Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer to the same specs...

Corner - 2-Leg Notched Nickel

2-leg notched corner, nickel. 20 gauge steel. Use on material that is minimum 1/2" thick. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but...

Corner - 2-Leg Notched Black

2-leg notched corner, black. 20 gauge steel. Use on material that is minimum 1/2" thick. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these...

Corner - 3-Leg Nickel

3-leg notched corner, nickel. 20 gauge steel. Use on material that is minimum 1/2" thick. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these...

Corner - 3-Leg Black

3-leg notched corner, black. 20 gauge steel. Use on material that is minimum 1/2" thick. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these...

Corner - 2-Leg Wraparound Nickel

2-leg wraparound corner, nickel. 20 gauge steel. For use on 3/4" material covered with vinyl. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but...

Corner - 2-Leg Wraparound Black

2-leg wraparound corner, black. 20 gauge steel. For use on 3/4" material covered with vinyl. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but...

Chevron Stacking Corner - Large

Large plastic chevron stacking corner. 1/4" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer to the same specs...

Chevron Stacking Corner - Small

Small plastic chevron stacking corner. 1/4" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer to the same specs...

Tapered Rubber Feet - Small (Pkg 4)

Small tapered rubber feet for amps/cabs. Metal washer insert for strength and stability. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the...

Tapered Rubber Feet - Medium (Pkg 4)

Medium tapered rubber feet for amps/cabs. Metal washer insert for strength and stability. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by...

Chrome Glides (Pkg 4)

Chrome glides for smooth sliding. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer to the same specs as the "brand...

Jack Plate - 1/4" Round Black Metal

Round Jack Plate for 1/4" jack. 2" outside diameter. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer to the same...

Tolex & Grill Cloth Sample Pack

Sample pack of the tolex & grill cloth that is in stock at the time the sample pack is ordered.  Does not include products with limited availability.  Samples are approximately 4"x4".