Saddle - Stainless Steel (10.8mm spacing)

Upgrading the saddles on your bridge are one of the cheapest and most effective ways of immediately improving the tone and sustain of your guitar.  Our cast stainless steel saddles will certainly take your tone to the next level!  These are the...

Saddle - Stainless Steel (10.5mm spacing)

Upgrading the saddles on your bridge are one of the cheapest and most effective ways of immediately improving the tone and sustain of your guitar.  Our cast stainless steel saddles will certainly take your tone to the next level!  These are the...

Oversized Strap Buttons - Black (pair)

Oversized Strap Buttons, Chrome.  Includes screws.  Sold as a pair. See alternate photo for dimensional drawing.

Hammond 290HZ - Power Transformer

MADE IN CANADA Replacement for Marshall JCM800 and JMP - 100 Watt Primary: 120/220/240VAC 50/60Hz Secondary: 350VCT @ 420mA98V @ 50mA6.3VCT @ 7A Features: Designed for drop in replacement of original units, though mounting holes may not always...

9V Battery Terminals - Straight

9-volt battery terminals mounted on rigid plastic.  Wires are 15cm long and come out of one side of the terminal. Sold individually.

9V Battery Terminals - Angled

9-volt battery terminals mounted on rigid plastic.  Wires are 15cm long and come out of the center of the terminal. Sold individually.

Generic - Pedal Power Daisy Chain (5 Connector)

Connect up to 5 pedals to one adapter with this pedal power daisy chain.  This chain has 1 in (2.1mm) and 5 right angle outs with 30cm of wire between plugs. Tech's Notes: "Make sure your adapter works with 2.1mm pins and that is can supply enough...

Generic - Pedal Power Daisy Chain (10 Connector)

Connect up to 10 pedals to one adapter with this pedal power daisy chain.  This chain has 1 in (2.1mm) and 10 right angle outs with 30cm of wire between plugs. Tech's Notes: "Make sure your adapter works with 2.1mm pins and that is can supply...

Hammond 1590B-BK - Standard Black Pedal Enclosure

Black Hammond 1590BBK - 4.43" x 2.38" x 1.22" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and...

Humbucker Mounting Ring Screws - #2x5/8”, Phillips, Oval, Nickel

Most commonly used as a mounting screw for short-medium humbucker rings on non-Gibson guitars. Thread: #2Length FMS: 5/8"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the...

Generic 1590LB - Mini Pedal Enclosure

Generic 1590LB (based on Hammond 1590LB) - 1.99" x 1.99" x 1.22" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection...

K-Style Tuners 6L - Bean Chrome (set) CLEARANCE

Our K-Style tuners take on that legendary look we all know and love.  This version comes with bean buttons and a 14:1 gear ratio.  The perfect upgrade to the stock OEM tuners found on 6-inline headstocks. Available in both treble and bass...

Eminence APT:30 - 10W 3.5kHz

The Eminence APT30 horn loaded tweeter offers exceptional high frequency reproduction at an exceptional value. Rated at 10 watts AES, this ultra-compact unit features a 2 oz. ferrite magnet, aluminum voice coil former, and mylar diaphragm. With an...

Switchcraft 3-way Pickup Selector - Right Angle

MADE IN USA Right-angle Switchcraft Pickup Selector, 3-Way.  Used on thinner body electrics, like SGs.  Includes 1x flat knurled nut.  Deep nut sold separately. Switch tip sold separately. As pictured, Switchcraft selector...

Reverb Tank - MOD 4BB3C1B

Replacement Reverb Tank for 4BB3C1B Solid, Sturdy Construction Long (16 ¾") 2 Spring Unit , Long Decay (2.75 - 4.0 seconds) Input Impedance 150 Ohms, Output Impedance 2250 Ohms Input Insulated/Output Grounded Horizontal,Open Side Down Mounting...

Straight Fret Wire - 057x110 Nickel/Silver (2ft Piece)

Jescar high quality fret wire.  See product pics for dimensions. Sold in 2ft straight length pieces.Qty 1 = 1 two foot long pieces of straight wireQty 5 = 5 two foot long pieces of straight wire

Eminence Kappa Pro 15A - 500W 8ohm

Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar. SPECIFICATIONS Nominal Diameter: 15", 381mm Nominal Impedance: 8 ohms Power: 500w rms, 1000w program Freq. Response: 46.0 Hz-4.0 kHz Sensitivity:...

Jack Plate - Top Angle Gold

Top Angle Jackplate, Gold. Includes screws. See alternate photo for dimensional drawing.

Jack Plate - Top Angle Black

Top Angle Jackplate, Black. Includes screws. See alternate photo for dimensional drawing.

Strat Knob Tone - 24-spline Black

Black Stratocaster Style Knob - Tone SPECIFICATIONSOverall Height: 13mmBase Diameter: 25mmIdeal Shaft Fit: Split ShaftFit Type: Push-on Fine (24 spline) Tech's notes: "These fit perfectly on CTS pots, and any other split shaft pots with a fine spline (24...