Guitar & Bass Parts

Pickguard Screws (for Gibson) - #3x3/8", Phillips, Oval, Black

Most commonly used as a pickguard screw for Gibson guitars. Thread: #3Length FMS: 3/8"Head: Countersunk / OvalDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry. ...

Roller String Guides (pair)

Dual roller style string guide for guitar, with mounting screw. Sold as a pair.  Screws included.

Plastic Acoustic Bass Bridge Pin - Black

Black plastic bridge pins for acoustic bass, with groove. 1 and 7/16 inch long, .324 inch under the collar and .312 inch at the tip. Sold individually.

Pickguard Screws - #4x1/2", Phillips, Oval, Black

Most commonly used as a pickguard screw on Fender-style pickguards and guitars. Thread: #4Length FMS: 1/2"Head: Countersunk / OvalDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire...

Plastic Binding - 0.5mm Black

Plastic binding for guitars, basses, and other stringed instruments. Dimensions: 0.5mm x 8mm x ~1650mm (0.020"x5/16"x~64.9")

Rhythm/Treble Ring - Black /w Gold Letters

Plastic rhythm/treble rings.  Sold individually. See alternate photo for dimensional drawing.

Schaller F-Series Locking Tuners (choose finish)

MADE IN GERMANY Not like the original - it's THE ORIGINAL!  Original look and specs with cutting-edge Schaller technology.  Exact replacement machine heads for Fender guitars with original dimensions in tried-and-tested Schaller quality. ...

Roller String Guide - Black

Dual roller style string guide for guitar, with mounting screw. Sold individually. See alternate photo for dimensional drawing.

Pickguard Blank - 1-ply Black Matte (11.5 x 17")

1-ply plastic pickguard blank. Layers: Black MatteDimensions: 11.5" x 17" x 0.080" (29.2cm x 43.2cm x 2mm) *Note: These are rough-cut blanks.  Dimensions listed are minimums.  Actual product may measure slightly larger.

Pickguard Blank - 3-ply Black/White/Black (11.5" x 17")

3-ply plastic pickguard blank. Layers: Black / White / BlackDimensions: 11.5" x 17" x 0.090" (29.2cm x 43.2cm x 2.3mm) *Note: These are rough-cut blanks.  Dimensions listed are minimums.  Actual product may measure slightly larger.

Pickguard Blank - 1-ply Black Glossy (11.5" x 17")

1-ply plastic pickguard blank. Layers: BlackDimensions: 11.5" x 17" x 0.080" (29.2cm x 43.2cm x 2mm) *Note: These are rough-cut blanks.  Dimensions listed are minimums.  Actual product may measure slightly larger.

Schaller Anchor Plate - 6-string (choose finish)

Made In Germany 6-string anchor plates are a fantastic alternative to string ferrules.  Many believe the larger metal piece, properly installed, can improve tone and sustain.  Not to mention, it looks way cooler than individual ferrules. Sold...

Plastic Binding - 1.5mm Black

Plastic binding for guitars, basses, and other stringed instruments. Dimensions: 1.5mm x 7mm x ~1650mm (0.059" x 0.276" x 64.961")

Plastic Binding - 1.0mm Black

Plastic binding for guitars, basses, and other stringed instruments. Dimensions: 1.0mm x 7mm x ~1650mm (0.039" x 0.276" x 64.961")

Pickup Mounting Screws - #6-32 x 3/4", Phillips, Round, Black

Most commonly used for mounting single coil pickups like Strat and Tele pickups.  Same thread/pitch as CRL and Oak Grigsby switch mounting screws. Thread: #6-32Length FMS: 3/4"Head: PanDrive: Phillips Sold individually. See NG-GPS-3036-NI for...

Pickguard - Telecaster 5-Hole, Vintage-spec (choose colour)

These should be a good fit on MOST genuine vintage-style Fender® MIA and MIM Telecasters® with 5-hole pickguards.  We say "most" because there are quite literally thousands of little variations in screw hole patterns and shapes between all...

Pickguard - Telecaster 8-Hole, US-spec (choose colour)

These should be a good fit on MOST genuine Fender® MIA and MIM Telecasters® with 8-hole pickguards.  We say "most" because there are quite literally thousands of little variations in screw hole patterns and shapes between all the...

Pickup Ring - Telecaster Black CLEARANCE

Finished metal pickup mounting ring for Telecaster neck pickups. Includes two matching screws. See alternate photo for dimensional drawing.

Pickguard - Stratocaster Blank, 4-hole, Tremolo (choose colour)

These should be a good fit on MOST genuine Fender® MIA and MIM Stratocasters® made after 2002.  We say "most" because there are quite literally thousands of little variations in screw hole patterns and shapes between all the...

Schaller Locking Nut Clamping Blocks - Choose Finish (pkg 3)

Replacement kit set of 3 nut clamping blocks for 6-string locking nuts. Specifications 1 set of 3 cut clamping blocks (for locking 2 strings each) Dimension: 11.4 x 11.4 mm Available in black, chrome, gold, nickel, ruthenium, and satin chrome.