ICs & Transistors

Transistor - 2N2222A

The 2N2222A NPN transistor. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N3904

Another versatile NPN transistor called for in many circuits. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N5088

When in doubt, use a 2N5088 NPN transistor.  Widely regarded as the most versatile. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N5458

This is a classic JFET used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N7000

This is a classic MOSFET used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2SC1815

Current Rating: 0.15AVoltage Rated: 50VTransistor Type: NPN PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC108

The BC108 small signal transistor. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC337

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC547

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC549

Another versatile NPN transistor called for in many circuits. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC550

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BS170

The BS170 MOSFET. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - J111

N-=channel MOSFET transistor.  50mA. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - J112

N-=channel MOSFET transistor.  50mA. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA12

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA13

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA18

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA42

This is a classic transistor used in many designs over the years. Current Rating: 0.5AVoltage Rated: 300VTransistor Type: NPN PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when...

Transistor - VN2222

N-=channel MOSFET transistor.  150mA. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.