Eminence Beta-12A-2 - 250W 8ohm

Recommended for professional audio and bass guitar applications as a woofer in a vented enclosure. Also works well for PA in a sealed or bandpass enclosure. SPECIFICATIONS Nominal Diameter: 12", 305.0mm Nominal Impedance: 8 ohms Power: 250w rms,...

Rubber Ring For EL34/5881 and 6L6GC Tuber Retainers

Rubber ring for retainer CE-S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"

Rubber Ring For KT88 and 6550 Tube Retainers

Rubber ring for retainer CE-S-H143 fits KT88 and 6550 tubes. Dampens vibration.

Tube Retainer - For EL84 Tubes

Tube retainer for EL84. for use with guitar amps and applications where the tube is suspended upside down in the chassis. Supports a maximum tube height of 2.8 inches

Tube Retainer - For KT88/6550 Tubes

For use with guitar amps and applications where KT88/6550 is suspended upside down in the chassis.

Belton Tube Retainer - For EL84s Tubes

Retainer (Belton). for use with EL84 tubes, mounts to chassis. Steel plate with nickel plating and natural coil spring. Note: These retainers are for specialized socket below-chassis mounting. (See mounting drawing below.) The springs are too short for...

Tube Retainer - For 12AX7 Tubes

Mounting Centers = 1", Overall Height = 2.2". Keeps common preamp tubes in place while dampening vibrations to reduce microphonics. Supports a maximum tube height of 2.1 inches

Tube Retainer - For EL34/5881 and 6L6GC Tubes

For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.

CTS - B10K Bias Trim Pot

Taper: B / LinearPercent @ Half Turn: 50%Resistance: 10KTolerance: +-20%Power Rated: 1/4WShaft Type: Recessed ScrewShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 1/4"Bushing Thread: 3/8 x 32Bushing Diameter: 3/8"Bushing...

Humbucker Mounting Ring - Curved/Slanted Tall - Cream

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 11mm - 10mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm *Matching Cream Parts?  See our blog post...

Humbucker Mounting Ring - Curved/Slanted Tall - Black

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 11mm - 10mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm

Humbucker Mounting Ring - Curved/Slanted Short - Black

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 7mm - 5mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.6mm Pickup screw spacing: 78mm

Humbucker Mounting Ring - Curved/Slanted Short - Cream

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 7mm - 5mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.6mm Pickup screw spacing: 78mm *Matching Cream Parts?  See our blog post...

Humbucker Mounting Ring - Flat/Slanted Tall - Cream

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Flat Top: Slanted 12mm - 11mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm *Matching Cream Parts?  See our blog post...

Humbucker Mounting Ring - Flat/Slanted Tall - Black

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Flat Top: Slanted 12mm - 11mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm

Humbucker Mounting Ring - Flat/Slanted Short - Black

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Flat Top: Slanted 7mm - 5mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm

Humbucker Mounting Ring - Flat/Slanted Short - Cream

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Flat Top: Slanted 7mm - 5mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm *Matching Cream Parts?  See our blog post...

9V Battery Box - Vertical Mount (screw-in)

Screw-mounted (externally) 9V battery box with access door. Cutout required: 40mmL x 23mmW x 56mmD Does NOT include terminals or lead wires. Includes mounting screws.

9V Battery Box - Flat Mount (screw-in)

Screw-mounted (internally) 9V battery box with access door and built-in terminals. Rout required: 73mmL x 33mmW x 20mmD Does NOT include lead wires. Includes mounting screws.

Humbucker Pickup Cover - 49.2mm Chrome CLEARANCE

Plated pickup covers.  49.2mm hole spacing.  Base material is nickel/silver for minimal tonal impact. Sold individually. See alternate photo for dimensional drawing. Tech's Notes: "These should fit most pickups with 49.2mm pole spacing...