ICs & Transistors

IC - Xvive MN3009, BBD, 256 Stage

The XVive MN3009 is a drop-in replacement for the original Panasonic 256-stage MN3009 BBD chip used in many chorus, vibrato, and flanger pedals and effects. The MN3009 is a 256-stage BBD that boasts a wide dynamic range and low distortion. Its signal...

IC Socket - Precision Tooled 16 Pin

Precision tooled 16-pin IC socket for integrated circuits.  A must have for solder circuits with ICs in them as they avoid the need to solder directly to the IC, which is very susceptible to heat damage.  Solder one of these to the board, then...

IC Socket - Precision Tooled 8-Pin

Precision tooled 8-Pin IC socket for integrated circuits.  A must have for solder circuits with ICs in them as they avoid the need to solder directly to the IC, which is very susceptible to heat damage.  Solder one of these to the board,...

Transistor - 2N2222A

The 2N2222A NPN transistor. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N3904

Another versatile NPN transistor called for in many circuits. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N5088

When in doubt, use a 2N5088 NPN transistor.  Widely regarded as the most versatile. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N5458

This is a classic JFET used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N7000

This is a classic MOSFET used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2SC1815

Current Rating: 0.15AVoltage Rated: 50VTransistor Type: NPN PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC108

The BC108 small signal transistor. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC337

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC547

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC549

Another versatile NPN transistor called for in many circuits. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC550

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BS170

The BS170 MOSFET. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - J111

N-=channel MOSFET transistor.  50mA. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - J112

N-=channel MOSFET transistor.  50mA. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA12

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA13

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA18

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.