Celestion G10 Vintage - 60W 8ohm

A worthy sucessor to the Vintage 10 the G10 Vintage is a 10" speaker with bags of attitude. Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 packs impressive punch with its 60W power handling. With the fast...

Celestion G10 Greenback - 30W 8ohm

MADE IN ENGLAND The 10" that thinks its a 12". This speaker was developed to recapture the legendary sound of Celestion's 1970s 10s - a 10" speaker with a surprisingly meaty tone. Low in output but with the weighty low-end balance of a 12", the G10...

Celestion G10 Gold - 40W 8ohm

MADE IN ENGLAND Following the great reviews we received for the Gold 12", we realized there was also a need for a speaker that conveyed the Alnico mellowness of the original Blue, with the speed and response of a 10" driver. The G10 Gold is the ultimate...

Eminence Ragin Cajun - 75W 8ohm

A very hot 10" American guitar speaker with rockin' blues tone. Colouration: Very loud touch-sensitive and responsive with bell-sounding top end and a little bite. Genre: American Rock, Blues and Country. SPECIFICATIONS Nominal Diameter: 10.0", 254.0...

Eminence Legend B810 - 150W 32ohm

Bass Guitar! Small Sealed enclosures. Use in multiples. SPECIFICATIONS Nominal size: 10", 254.0 mm Nominal Impedance: 32 ohms Power: 150w rms, 300w program Freq. Response: 49.0 Hz-5.1 kHz Sensitivity: 93.0 db 1w/1m Magnet Weight: 30.0 oz, 851.0 grams...

Eminence Basslite S2010 - 150W 8ohm

Recommended for bass guitar. Ideal in vented 1X, 2X, and 4 X10 enclosures. SPECIFICATIONS Nominal Diameter: 10", 254.0 mm Nominal Impedance: 8 ohms Power: 150w rms, 300w program Freq. Response: 54.0 Hz-4.0 kHz Sensitivity: 96.2 db 1w/1m Magnet Weight:...

Wide Strap Handle - Nickel End Caps

Wide strap handle with nickel end caps. Steel reinforced rubber handle. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same...

Wide Strap Handle - Black End Caps

Wide strap handle with black end caps. Steel reinforced rubber handle. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer...

Tapered Rubber Feet - Large (Pkg 4)

Large tapered rubber feet for amps/cabs. Metal washer insert for strength and stability. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by...

Jack Plate - 1/4" Square Black Metal

Square jack plate for 1/4" jack. 4.02" x 4.40".  Jack holes are 10mm and will fit any 3/8" bushing jacks. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that,...

Jack Plate - Dual 1/4" Square Black Metal

Square jack plate for two 1/4" jacks. 4.02" x 4.40".  Jack holes are 10mm and will fit any 3/8" bushing jacks. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into...

Corner - 2-Leg Notched Nickel

2-leg notched corner, nickel. 20 gauge steel. Use on material that is minimum 1/2" thick. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but...

Corner - 2-Leg Notched Black

2-leg notched corner, black. 20 gauge steel. Use on material that is minimum 1/2" thick. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these...

Corner - 3-Leg Nickel

3-leg notched corner, nickel. 20 gauge steel. Use on material that is minimum 1/2" thick. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these...

Corner - 3-Leg Black

3-leg notched corner, black. 20 gauge steel. Use on material that is minimum 1/2" thick. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these...

Corner - 2-Leg Wraparound Nickel

2-leg wraparound corner, nickel. 20 gauge steel. For use on 3/4" material covered with vinyl. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but...

Corner - 2-Leg Wraparound Black

2-leg wraparound corner, black. 20 gauge steel. For use on 3/4" material covered with vinyl. 1/2" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but...

Chevron Stacking Corner - Large

Large plastic chevron stacking corner. 1/4" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer to the same specs...

Chevron Stacking Corner - Small

Small plastic chevron stacking corner. 1/4" radius. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the same manufacturer to the same specs...

Tapered Rubber Feet - Small (Pkg 4)

Small tapered rubber feet for amps/cabs. Metal washer insert for strength and stability. Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these are made by the...