CTS - B500K LONG Split Shaft Pot

Taper: B / LinearPercent @ Half Turn: 50%Resistance: 500KTolerance: +-10%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 1 1/8"Bushing Thread: 3/8 x 32Bushing Diameter: 3/8"Bushing...

Grill Cloth - Fender Style Oxblood w/ Gold Stripes - By Yard (36" Wide)

MADE IN USA Genuine Mellotone SF5115-01 Grill Cloth. "Fender® Style Oxblood w/ Gold Stripes" Don't let the price fool you!  You can certainly spend up to 2X the price on "brand name" versions of this stuff if you're into that, but these are...

Lift Off Hinge - Zinc

Lift-off hinge, Zinc. Sold individually.  Screws not included.  Requires #8 pan or truss head screws. Click here to purchase the matching pan head screws. See alternate photo for dimensional drawing.

Footswitch Nut - Anodized Aluminum (choose colour)

Anodized aluminum footswitch nuts with M12x0.75 thread.  Available in a variety of colours.  Sold individually. These are great for colour coding your pedals or just making them look cool. Tech's notes: "These fit on every type of SPDT, DPDT,...

Copper Shielding Tape - By Foot

Copper shielding tape with conductive adhesive. Used in control cavities and under pickguards to protect electrical components from external electromagnetic interference. Sold by the foot. Roll is 12" wide. *Due to the fact that this product needs to...

Strat Switch Tip - Black

Strat style switch knob.  Cutout for .052" x .188" blade tip (USA sized blade switches). Sold individually. Tech's notes: "These fit on CRL and Oak Grigsby blade switches."

Eyelets - Small Tinned (pkg 10)

Tin plated brass eyelets, most commonly used on vintage style pickups.  The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes.  The outside diameter of the barrel is 0.089” and the recommended...

Humbucker Mounting Ring Screws - #2x1/2”, Phillips, Flat, Stainless

Most commonly used as a mounting screw for short humbucker rings on non-Gibson guitars. Thread: #2Length FMS: 1/2"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar...

Switchcraft #3501MX - RCA Plug - Vintage Style

MADE IN USA These nickel plated copper alloy RCA straight plugs from Switchcraft are commonly used in combination with braided shield wire to make reverb tank cables.  They can also be used for any other RCA cable needs.  These vintage style...

Generic #297 - 1/4" Stereo Straight Plug

#297 style - 1/4" stereo straight plug. Nickel plated steel.

Transistor - BS170

The BS170 MOSFET. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N5458

This is a classic JFET used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Tweed Fabric - Olive - By Yard (64" Wide)

MADE IN USA Genuine Olive Tweed Fabric. This is the real deal.  Not a cheap knockoff or vinyl equivalent.  Don't let the price fool you!  You can certainly spend up to 2X the price on "brand name" versions of this stuff if you're into...

Barrel Knob for 6mm - Chrome

Metal barrel knobs.  Sold individually. SPECIFICATIONSOverall Height: 19mmBase Diameter: 19mmIdeal Shaft Fit: Split Shaft (6mm)Fit Type: *Set Screw *Please note that the set screw may be different than pictured, because the manufacturer sometimes...

IC - NJM4558

The NJM4558D (aka: JRC4558D) dual op-amp (operational amplifier) JFET IC (integrated circuit).  Identical tone to the classic 4558 found in TS circuits. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a...

Diode - 1N60P

The 1N60P is a Schottky Barrier diode in a DO35 type package that provides efficient and excellent linearity.  A fantastic clipping diode used commonly in many distortion and overdrive circuits. SpecificationsNumber of Rectifiers:...

9V Battery Terminals - Angled

9-volt battery terminals mounted on rigid plastic.  Wires are 15cm long and come out of the center of the terminal. Sold individually.

Recessed Black Metal Handle - Medium

Heavy duty medium recessed black metal handle. Outside: 8 5/8" x 6 3/8" x 2 1/2"Cutout: 6 7/8" x 4 1/2" Don't let the price fool you!  You can certainly spend up to 10X the price on "brand name" versions of this stuff if you're into that, but these...

Humbucker Mounting Screws - #3-48x1", Phillips, Round, Nickel

Most commonly used for mounting humbuckers to mounting rings. Thread: #3-48Length FMS: 1"Head: RoundDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry.  Don't...

Cab Jack Plate Screws - #6x1/2", Phillips, Pan, Black

Most commonly used to mount round speaker cabinet jack plates.  These high quality screws are built stronger and more durable than imported versions. Thread: #6Length FMS: 1/2"Head: PanDrive: Phillips Sold individually. Tech's notes: "Screw and...