Product Description
Alpha was generous enough to build these custom pots to our specs. We opted for brass shafts and bushings for longer life, tighter tolerances than most mainstream pots, and a custom audio taper that gives a smoother sweep than standard audio tapers. They are also manufactured to a slightly lower torque. The result is a quick but smooth turning feel. Not as tight as a CTS pot, but not as loose as a Bourns pot. These provide what we feel is a good medium between the two.
Specifications:
Taper: A / Audio / Logarithmic
Resistance: Choose option (A250K or A500K)
Tolerance: +-8%
Power Rating: 1/4W
Shaft Type: USA / Fine / 24 Spline
Shaft Length FMS (from mounting surface): Choose option (3/4" or 1 1//8" LONG)
Bushing Thread: 3/8-32
Bushing Diameter: 3/8"
Bushing Length: Choose option (3/8" or 3/4" LONG)
Body Diameter: 24mm
Lug Type: Solder
Mounting Hole: 7/16"
Other info: Includes 1 lock washer, 1 flat washer, and 2 nuts.
Product Videos
Product Reviews
9 Reviews Hide Reviews Show Reviews
-
Non solderable backs
Non solderable backs, should be in the description, put into guitar and had to remove to etch pot backs to accept solder. NG Response: "As with any pots, the backs should be cleaned prior to soldering to remove the protective oils left over from the manufacturing process, as they can make it difficult for the solder to bond. Scuffing and the use of flux helps too."
-
Alpha Pro Pots
These are awesome pots, very smooth and the taper is from 0 - 10. This will be my go to from now on
-
Great pots
Works great, tested and spot on. Feels great beside my cts pot on the same guitar, I’d definitely buy again
-
SPEED KNOB - 24-SPLINE GOLD
Very nice quality ,with a usable sweep a+
