- Replacement Reverb Tank for 4EB3C1B
- Solid, Sturdy Construction
- Long (16 ¾") 2 Spring Unit , Long Decay (2.75 – 4.0 seconds)
- Input Impedance 600 Ohms, Output Impedance 2250 Ohms
- Input Insulated/Output Grounded
- Horizontal, Open Side Down Mounting Plane
Compatible Amps Include: Fender® Hot Rod Deville, Hot Rod Deluxe, Blues Deluxe (reissue only), Blues Deville (reissue only). Replaces Fender® Part Number 0050394000. Also, fits Traynor™ YCV50 as well as some Music Man™ and Peavey™ models. Suitable upgrade/ replacement for the Vox™ AC30CC series amp.
The MOD® Reverb Tanks are high quality upgrade units. Some of the major differences between the MOD®s and other reverb tanks are that the Transducers are wired directly to their respective RCA jacks as opposed to current production tanks where Transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference.
6 Reviews Hide Reviews Show Reviews
Exactly as expected, but sooner than expected! Installed and it sounds pretty neat.
Replaced the crappy reverb tank in my Traynor YCV20WR and what a difference! I can now actually use my reverb on a setting of more than 2 and get a quality tone. It’s a pretty inexpensive upgrade when you consider the dramatic improvement in reverb quality!
Bought this spring tank to replace the broken one in my Peavey Bandit 112 Red Stripe. Works perfectly. Longer reverb than the stock Accutronics tank and thats a good thing. Got really fast shipping. Great service as usual with NGG.
I replaced the original, defective reverb tank from my Traynor YCV-40 with this one. (Remember to remove both foam pieces placed during shipment or you won't get any reverb !!!).
Replaced the failed reverb tank in my Sister in laws traynor amplifier, this MOD unit sounds amazing, it’s a lot more sensitive than the stock tank was, where she would usually play at a 5-7 level on the dial, Is now achievable at a 3-5 level. Gives lots of room for a gratuitous amount of reverb if you wanted it.
While I didn't 'need' to replace the reverb tank in the amp I was returning and re-capping, I thought ' what the heck'. Turned out to be a great replacement for the tank in my Peavey DB 210.