Next Gen Parts

3-on-a-plate Tuners - Folk-Style with Pearloid Buttons

Folk-style 3-on-a-plate tuners.  A great replacement for your budget acoustic guitar, without a hefty price tag. 15:1 gear ratio 35mm pole spacing 6mm shaft diameter Bushings for 8mm...

3-on-a-plate Tuners - Folk-Style with Large Buttons

Folk-style 3-on-a-plate tuners.  A great replacement for your budget acoustic guitar, without a hefty price tag. 15:1 gear ratio 35mm pole spacing 6mm shaft diameter Bushings for 8mm...

Inlay Dots - 1/4" Mother of Pearl (pkg 20)

*Please note: Due to the organic nature of this material, the colour can vary between pieces, even within the same pack of 20pcs. Genuine mother of pearl inlay dots.  Nominally 1/4 inch...

Tee Nuts - #8-32

Used in combination with #8-32 machine screws for mounting various parts to cabinets. Thread: #8-32Length FMS: 1/4" Sold individually.

Humbucker Mounting Screws - #3-48 x 1.25", Phillips, Round, Gold

Most commonly used for mounting humbuckers to mounting rings. Thread: #3-48Length FMS: 1 1/4"Head: RoundDrive: Phillips Sold individually.  Buy in bulk to save $$$$. See NG-GPS-0038-NI for...

Truss Rod Cover Screws - #3 x 1/4”, Phillips, Round, Nickel

Made in USA Most commonly used for truss rod covers on Gibson guitars. Thread: #3Length FMS: 1/4"Head: RoundDrive: Phillips Sold individually.  Buy in bulk to save $$$$. Tech's notes: "Screw...

Truss Rod Cover Screws - #3 x 1/4”, Phillips, Round, Gold

Made in USA Most commonly used for truss rod covers on Gibson guitars. Thread: #3Length FMS: 1/4"Head: RoundDrive: Phillips Sold individually.  Buy in bulk to save $$$$. Tech's notes: "Screw...

Flatwork - Strat Dual Blade CLEARANCE

Laser cut flatwork for making dual blade strat sized pickups. Specs Thickness:  2.4mm Fits perfectly with the rest of our strat "blade" parts: blades, magnets, bobbins, and covers. Eyelets...

Jack Sleeve - For Barrel and Endpin Jacks (chrome)

Sleeve for barrel and endpin jacks.  M12x0.75 thread fits most import jacks. Sold individually. Note: Does NOT fit US-spec barrel and endpin jacks (like Switchcraft).

Pickguard - Stratocaster Blank, 4-hole, Tremolo (choose colour)

These should be a good fit on MOST genuine Fender® MIA and MIM Stratocasters® made after 2002.  We say "most" because there are quite literally thousands of little variations...

Celluloid Binding - 1.5mm Abalone

Celluloid binding for guitars, basses, and other stringed instruments. Dimensions: 1.5mm x 7mm x ~1625mm (0.059"x9/32"x~64")

Treble Bleed Circuit - For Single Coils

MADE IN CANADA Ever notice your tone gets darker as you turn your volume controls down on your guitar?  That's because when you reduce volume, you lose higher frequencies first.  A treble...

Telecaster Pickup Ring - Metal Gold CLEARANCE

Finished metal pickup mounting ring for Telecaster neck pickups. Includes two matching screws. See alternate photo for dimensional drawing.

Deep Nut - Fine Knurl, Gold for Switchcraft Switches (15/32"-32)

Made in USA Deep thread nut for use with Switchcraft switches. Used on some models of Gibson® guitars and other brands where the threading of the switch isn’t able to protrude through the...

Inlay Dots - 1/4" Abalone (pkg 20)

*Please note: Due to the organic nature of this material, the colour can vary between pieces, even within the same pack of 20pcs. Genuine abalone inlay dots.  Nominally 1/4 inch (diameter...

Carbon Fiber Neck Rod - 24" x 1/4" x 1/4"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Carbon Fiber Neck Rod - 24" x 3/16" x 3/8"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Carbon Fiber Neck Rod - 24" x 1/8" x 3/8"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Carbon Fiber Neck Rod - 18.125" x 1/4" x 1/4"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Carbon Fiber Neck Rod - 18.125" x 3/16" x 3/8"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...