Next Gen Parts

Jack Sleeve - For Barrel and Endpin Jacks (chrome)

Sleeve for barrel and endpin jacks.  M12x0.75 thread fits most import jacks. Sold individually. Note: Does NOT fit US-spec barrel and endpin jacks (like Switchcraft).

Pickguard - Stratocaster Blank, 4-hole, Tremolo (choose colour)

These should be a good fit on MOST genuine Fender® MIA and MIM Stratocasters® made after 2002.  We say "most" because there are quite literally thousands of little variations...

Celluloid Binding - 1.5mm Abalone

Celluloid binding for guitars, basses, and other stringed instruments. Dimensions: 1.5mm x 7mm x ~1625mm (0.059"x9/32"x~64")

Treble Bleed Circuit - For Single Coils

MADE IN CANADA Ever notice your tone gets darker as you turn your volume controls down on your guitar?  That's because when you reduce volume, you lose higher frequencies first.  A treble...

Deep Nut - Fine Knurl, Gold for Switchcraft Switches (15/32"-32)

Made in USA Deep thread nut for use with Switchcraft switches. Used on some models of Gibson® guitars and other brands where the threading of the switch isn’t able to protrude through the...

Inlay Dots - 1/4" Abalone (pkg 20)

*Please note: Due to the organic nature of this material, the colour can vary between pieces, even within the same pack of 20pcs. Genuine abalone inlay dots.  Nominally 1/4 inch (diameter...

Carbon Fiber Neck Rod - 24" x 1/4" x 1/4"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Carbon Fiber Neck Rod - 24" x 3/16" x 3/8"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Carbon Fiber Neck Rod - 24" x 1/8" x 3/8"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Carbon Fiber Neck Rod - 18.125" x 1/4" x 1/4"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Carbon Fiber Neck Rod - 18.125" x 3/16" x 3/8"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Carbon Fiber Neck Rod - 18.125" x 1/8" x 3/8"

Carbon fiber exhibits so many of the qualities useful in fine instrument construction — namely, low weight, stiffness, stability, resistance to fatigue and creep.  Its low weight and high...

Classical Style Bridge - Rosewood

Rosewood classical style bridge. See alternate photo for dimensional drawing.

Acoustic Martin-Style Bridge - Rosewood

Rosewood Martin-style acoustic guitar bridge. See alternate photo for dimensional drawing.

Pickguard Screws - #4 x 1/2", Phillips, Oval, Gold

Most commonly used as a pickguard screw on Fender-style pickguards and guitars. Thread: #4Length FMS: 1/2"Head: Countersunk / OvalDrive: Phillips Sold individually. Tech's notes: "Screw and spring...

Pickup Mounting Screws - #6-32 x 3/4", Phillips, Pan, Gold

Most commonly used for mounting single coil pickups like Strat and Tele pickups.  Same thread/pitch as CRL and Oak Grigsby switch mounting screws. Thread: #6-32Length FMS: 3/4"Head: PanDrive:...

Pickup Mounting Screws - #6-32 x 3/4", Phillips, Pan, Black

Most commonly used for mounting single coil pickups like Strat and Tele pickups.  Same thread/pitch as CRL and Oak Grigsby switch mounting screws. Thread: #6-32Length FMS: 3/4"Head: PanDrive:...

Humbucker Mounting Springs - 1"

Used in combination with humbucker mounting screws to mount humbuckers to humbucker mounting rings. Size: For #3 screws.Length (uncompressed): 1"Material: Plated Steel Sold individually. Tech's...

Deep Nut - Fine Knurl, Nickel for Switchcraft Switches (15/32"-32)

Made in USA Deep thread nut for use with Switchcraft switches. Used on some models of Gibson® guitars and other brands where the threading of the switch isn’t able to protrude through the...

Next Gen - 20AWG Mini Instrument Cable - By Foot

Designed by Canadians and built for Canadians!  Our mini guitar cable uses a 20AWG main conductor for a lower capacitance than the equivalent competitor's cable, which means more clarity and...