1/4" Plugs

Generic #228S - 1/4" Stereo Right Angle "Pancake" Plug

#228 style - 1/4" Stereo Right Angle "Pancake" Plug Nickel plated steel. Tech's notes: "These work best with cable that is 5.5mm-6.5mm in diameter.  It can work with smaller cable, but you will need to wrap that cable with heatshrink, tape, or...

Generic #236 - 1/4" Stereo Right Angle Plug

#236 style - 1/4" stereo right angle plug. Nickel plated steel.

Generic #297 - 1/4" Stereo Straight Plug

#297 style - 1/4" stereo straight plug. Nickel plated steel.

N-Style NP3C - 1/4" Stereo Straight Plug

Designed after the classic N-style 1/4" stereo NP3C 3 conductor plug.  This aftermarket version includes all the benefits of the advanced chuck/strain-relief at a fraction of the cost.

N-Style NP3C - 1/4" Stereo Straight Plug - Black

Designed after the classic N-style 1/4" stereo NP3C 3 conductor plug.  This aftermarket version includes all the benefits of the advanced chuck/strain-relief at a fraction of the cost.

SquarePlug SP550-S - 1/4" Stereo Right Angle "Pancake" Plug

SquarePlug SP550-S is the smallest 1/4" stereo pancake style soldered plug on the market.  It is 20% smaller than the previous industry standard Switchcraft #228 and projects by only 8.9mm, which is much less than any currently available soldered...

SquarePlug SP550-SBK - 1/4" Stereo Right Angle "Pancake" Plug (black)

SquarePlug SP550-S is the smallest 1/4" stereo pancake style soldered plug on the market.  It is 20% smaller than the previous industry standard Switchcraft #228 and projects by only 8.9mm, which is much less than any currently available soldered...

SquarePlug SPS6-S - 1/4" Stereo Short Plug

WARNING: Do NOT over-tighten the strain relief screws.  It is normal for them to stick out a bit.  Those screws should only be snug against the wire to assist with strain relief, not screwed in all the way.  Over-tightening them may...

SquarePlug SPS6-SBK - 1/4" Stereo Short Plug (black)

WARNING: Do NOT over-tighten the strain relief screws.  It is normal for them to stick out a bit.  Those screws should only be snug against the wire to assist with strain relief, not screwed in all the way.  Over-tightening them may...

SquarePlug SPS7-S - 1/4" Stereo Plug (for Y-cable)

SquarePlug SPS7-S is an incredibly unique plug designed specifically for Y-cable.  It features a custom oblong shaped cable-exit to maintain even tension on the cable and prevent folding/twisting, which can cause unwanted stress on the solder joints...

SquarePlug SPS7-SBK - 1/4" Stereo Plug (black; for Y-cable)

SquarePlug SPS7-S is an incredibly unique plug designed specifically for Y-cable.  It features a custom oblong shaped cable-exit to maintain even tension on the cable and prevent folding/twisting, which can cause unwanted stress on the solder joints...

Switchcraft #236 - 1/4" Stereo Right Angle Plug

MADE IN USA Perfect for making your own high quality, three conductor cables or replacing cheap, unreliable stereo cable ends with the durability of Switchcraft.

Switchcraft #238X - 1/4" Stereo Right Angle "Pancake" Plug

MADE IN USA 1/4" Stereo 3 Conductor Cable Mount Plug, Flat Shielded Handle w/Solder Contacts. Tech's notes: "These work best with cable that is 5.5mm-6.5mm in diameter, like our 2-Conductor Cable.  It can work with smaller cable, but you will need...

Switchcraft #297 - 1/4" Stereo Straight Plug

MADE IN USA Heavy duty machined copper alloy handle, tip and body for unsurpassed ruggedness. Bright nickel plating on exterior surfaces will not chip or corrode. Solder terminals are tin electroplated for ease of soldering. One-piece tip rod staked into...