Belton Tube Retainer - For EL84s Tubes

Retainer (Belton). for use with EL84 tubes, mounts to chassis. Steel plate with nickel plating and natural coil spring. Note: These retainers are for specialized socket below-chassis mounting. (See mounting drawing below.) The springs are too short for...

Tube Retainer - For 12AX7 Tubes

Mounting Centers = 1", Overall Height = 2.2". Keeps common preamp tubes in place while dampening vibrations to reduce microphonics. Supports a maximum tube height of 2.1 inches

Tube Retainer - For EL34/5881 and 6L6GC Tubes

For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.

CTS - B10K Bias Trim Pot

Taper: B / LinearPercent @ Half Turn: 50%Resistance: 10KTolerance: +-20%Power Rated: 1/4WShaft Type: Recessed ScrewShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 1/4"Bushing Thread: 3/8 x 32Bushing Diameter: 3/8"Bushing...

Humbucker Mounting Ring - Curved/Slanted Tall - Cream

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 11mm - 10mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm *Matching Cream Parts?  See our blog post...

Humbucker Mounting Ring - Curved/Slanted Tall - Black

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 11mm - 10mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm

Humbucker Mounting Ring - Curved/Slanted Short - Black

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 7mm - 5mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.6mm Pickup screw spacing: 78mm

Humbucker Mounting Ring - Curved/Slanted Short - Cream

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 7mm - 5mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.6mm Pickup screw spacing: 78mm *Matching Cream Parts?  See our blog post...

Humbucker Mounting Ring - Flat/Slanted Tall - Cream

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Flat Top: Slanted 12mm - 11mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm *Matching Cream Parts?  See our blog post...

Humbucker Mounting Ring - Flat/Slanted Tall - Black

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Flat Top: Slanted 12mm - 11mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm

Humbucker Mounting Ring - Flat/Slanted Short - Black

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Flat Top: Slanted 7mm - 5mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm

Humbucker Mounting Ring - Flat/Slanted Short - Cream

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Flat Top: Slanted 7mm - 5mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm *Matching Cream Parts?  See our blog post...

9V Battery Box - Vertical Mount (screw-in)

Screw-mounted (externally) 9V battery box with access door. Cutout required: 40mmL x 23mmW x 56mmD Does NOT include terminals or lead wires. Includes mounting screws.

9V Battery Box - Flat Mount (screw-in)

Screw-mounted (internally) 9V battery box with access door and built-in terminals. Rout required: 73mmL x 33mmW x 20mmD Does NOT include lead wires. Includes mounting screws.

Humbucker Pickup Cover - 49.2mm Chrome CLEARANCE

Plated pickup covers.  49.2mm hole spacing.  Base material is nickel/silver for minimal tonal impact. Sold individually. See alternate photo for dimensional drawing. Tech's Notes: "These should fit most pickups with 49.2mm pole spacing...

Footswitch - SPST Soft On-(Off) NC Momentary (solder)

Material: Nickel Plated Brass Switch: Soft (no click) Function: SPST ON-(OFF) Momentary"Normally Closed" Terminals: 2-pin Solder Bushing Diameter: 7/16" Bushing Length: 7/32" Tech's notes: "Default circuit...

Footswitch Nut - Anodized Aluminum (choose colour)

Anodized aluminum footswitch nuts with M12x0.75 thread.  Available in a variety of colours.  Sold individually. These are great for colour coding your pedals or just making them look cool. Tech's notes: "These fit on every type of SPDT, DPDT,...

Footswitch - 4PDT On-On Momentary (solder)

Material: Nickel Plated Brass Switch: Standard Click Function: 4PDT ON-(On) Momentary Terminals: 12-pin Solder Bushing Diameter: 7/16" Bushing Length: 7/16" Jon's notes: "Requires a depth of 7/8" minimum...

Footswitch - 4PDT On-On Latching (solder)

Material: Nickel Plated Brass Switch: Standard Click Function: 4PDT ON-ON Latching Terminals: 12-pin Solder Bushing Diameter: 7/16" Bushing Length: 7/16" Jon's notes: "Requires a depth of 7/8" minimum...

Footswitch /w Dual Colour LED Ring - 3PDT On-On Latching (choose colours)

Material: Nickel Plated Brass Switch: Standard Click Function: 3PDT ON-ON Latching Terminals: 9-pin Solder Bushing Diameter: 7/16" Bushing Length: 7/16" Hole Size: 18mm required (for the LED ring washer to fit...