F&T Capacitor - Electrolytic, Axial Lead, 100µF 450V

Made in Germany Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability. 100 uF/...

Flat Cap Knob - Choose Colour

Push-on style coloured cap knobs.  Sold individually. SPECIFICATIONSOverall Height: 15mmBase Diameter: 15mmIdeal Shaft Fit: 6mm Split ShaftFit Type: Push-on Coarse (18 spline) Tech's notes: "These fit perfectly on any split shaft pots with a...

Aluminum Knob - Medium (choose colour)

Push-on style aluminum knobs (plastic with aluminum surface layer).  Sold individually. SPECIFICATIONSOverall Height: 17mmBase Diameter: 15mmIdeal Shaft Fit: 6mm Split ShaftFit Type: Push-on Coarse (18 spline) Tech's notes: "These fit on split...

Terminal Strip - 5 Lug, 5th Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5.

Terminal Strip - 6 Lug, 1st & 6th Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5.

Terminal Strip - 3 Lug, 0 Common, Vertical (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Terminal Strip - 5 Lug, 0 Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5.

Terminal Strip - 2 Lug, 2nd Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Terminal Strip - 4 Lug, 2nd Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Terminal Strip - 8 Lug, 1st & 8th Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Terminal Strip - 3 Lug, 2nd Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Terminal Strip - 5 Lug, 3rd Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Ceramic - 8 Pin Octal Tube Socket (solder)

Ceramic Tube socket used for octal power tubes. Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”) Mounting Centers: 1-1/2” with oblong mounting holes See alternate photo for...

Ceramic - 9 Pin Mini Tube Socket (solder)

Ceramic tube socket commonly used for preamp tubes or EL84 power tubes. Chassis hole: 7/8” Mounting Centers: 1-1/8” Bottom or top mount See alternate photo for dimensional drawing.

Staking Tool - For Eyelets and Turrets

Turret staking tool. Directions: Drill ⅛" hole Insert eyelet Flip board over on to a hard service Center staking tool over the eyelet Strike staking tool with hammer to clamp eyelet to board See alternate photo for dimensional drawing.

Vulcanized Fiberboard - 3" x 15" x 0.062"

Vulcanized Fiberboard, used for laying out circuits using eyelets.  NOT pre-drilled. Size: 3" x 15" x 0.062"

Turret Board - Pre-drilled 300mm x 60mm x 2mm

Blank board 300mm x 60mm, 2mm thick Glass epoxy unclad laminate. For 2.6mm diameter turrets.

Toggle Switch - SPST Long Arm

Carling, 2 position, On-Off, SPST with solder lugs, ½" mounting hole. 3A 250V, 6A 125V, AC/DC See alternate photo for dimensional drawing.

Switch - Carling, Toggle, SPST, Short Arm

Carling 110-63 Fender® style power and/or standby switch (SPST). This switch is a great replacement for older Fender® amps where the shorter toggle length (1/2”) is desired. 3A 250V, 6A 125V, AC/DC See alternate photo for dimensional...

Hammond 290CAZ - Power Transformer

MADE IN CANADA Replacement for Ampeg GEMINI VI 25W Equivalent to manufacturer part number PT-113 Primary: 117VAC 60Hz Secondary: 625VCT @ 100mA6.3V @ 3A Features: Designed for drop in replacement of original units, though...