Generic - Pedal Power Daisy Chain (10 Connector)

Connect up to 10 pedals to one adapter with this pedal power daisy chain.  This chain has 1 in (2.1mm) and 10 right angle outs with 30cm of wire between plugs. Tech's Notes: "Make sure your adapter works with 2.1mm pins and that is can supply...

Hammond 1590B-BK - Standard Black Pedal Enclosure

Black powder coated Hammond 1590BBK - 4.43" x 2.38" x 1.22" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against...

Humbucker Mounting Ring Screws - #2 x 5/8”, Phillips, Oval, Nickel

Most commonly used as a mounting screw for short-medium humbucker rings on non-Gibson guitars. Thread: #2Length FMS: 5/8"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the...

Generic 1590LB - Mini Pedal Enclosure

Generic 1590LB (based on Hammond 1590LB) - 1.99" x 1.99" x 1.22" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection...

Eminence APT:30 - 10W 3.5kHz

The Eminence APT30 horn loaded tweeter offers exceptional high frequency reproduction at an exceptional value. Rated at 10 watts AES, this ultra-compact unit features a 2 oz. ferrite magnet, aluminum voice coil former, and mylar diaphragm. With an...

Switchcraft 3-way Pickup Selector - Right Angle

MADE IN USA Right-angle Switchcraft Pickup Selector, 3-Way.  Used on thinner body electrics, like SGs.  Includes 1x flat knurled nut.  Deep nut sold separately. Switch tip sold separately. As pictured, Switchcraft selector switch...

Reverb Tank - MOD 4BB3C1B

Read our Reverb Tank Code System Explained blog to better understand how to find the right replacement for your amp! Replacement Reverb Tank for 4BB3C1B Solid, Sturdy Construction Long (16 ¾") 2 Spring Unit , Long Decay (2.75 - 4.0...

Eminence Kappa Pro 15A - 500W 8ohm

Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar. SPECIFICATIONS Nominal Diameter: 15", 381mm Nominal Impedance: 8 ohms Power: 500w rms, 1000w program Freq. Response: 46.0 Hz-4.0 kHz Sensitivity:...

Jack Plate - Top Angle Gold

Top Angle Jackplate, Gold. Includes screws. See alternate photo for dimensional drawing.

Jack Plate - Top Angle Black

Top Angle Jackplate, Black. Includes screws. See alternate photo for dimensional drawing.

Strat Knob Tone - 24-spline Black

Black Stratocaster Style Knob - Tone SPECIFICATIONSOverall Height: 13mmBase Diameter: 25mmIdeal Shaft Fit: Split ShaftFit Type: Push-on Fine (24 spline) Tech's notes: "These fit perfectly on CTS pots, and any other split shaft pots with a fine spline (24...

Hammond 290LEX - Power Transformer

MADE IN CANADA Replacement for Marshall JTM 45 Primary: 100/120/220/230/240VAC 50/60Hz Secondary: 690VCT @ 200mA6.3VCT @ 5A5V @ 3A Features: Designed for drop in replacement of original units, though mounting holes may not always match up...

Washer - Flat, For Pots & Jacks (3/8")

Flat washer for 3/8" pots and jacks.  Compatible with all parts using a 3/8" (USA) bushing.  See individual product descriptions to see if your pot or jack is compatible. Sold individually.  Bulk discounts available.

Mini Switch - Standard 3PDT On-Off-On

On-Off-On Mini Switch with solder lugs, 3PDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard 3PDT On-On

On-On Mini Switch with solder lugs, 3PDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard DPDT On-On-On

On-On-On (type 1) Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard DPDT On-Off-On

On-Off-On Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard DPDT On-On

On-On Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard SPDT On-Off-On

On-Off-On Mini Switch with solder lugs, SPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard SPDT On-On

On-On Mini Switch with solder lugs, SPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.