-
CTS
|sku: AP-EP-4185-B00
CTS - A250K No-Load Tone Pot
C$8.39
Generic
|sku: CE-P-0802H
Terminal Strip - 8 Lug, 1st & 8th Lug Common, Horizontal (pkg 5)
C$13.99
Generic
|sku: CD-02-MSSB-DPDT2
Mini Switch - Short Bat DPDT On-On
C$1.79
Next Gen Parts
|sku: NG-KST-2053-BK
Dome Knob for 6mm - Black
C$5.99
Generic
|sku: CD-08-9VTS
9V Battery Terminals - Straight
C$0.99
F&T
|sku: CE-C-ET16-475-FT
F&T Capacitor - Electrolytic, Axial Lead, 16µF 475V
C$12.99
Generic
|sku: CD-07-236
Generic #236 - 1/4" Stereo Right Angle Plug
C$3.39
Switchcraft
|sku: SC-P2912
Switchcraft Switch Tip - Amber
C$3.59
Next Gen Parts
|sku: NG-GBPT-2319-CH
Standard Tuners - Bean Chrome
C$5.99
Generic
|sku: CE-S-H122
Capacitor Clamp - 1 3/8" Diameter
C$3.19
Switchcraft
|sku: SC-151
Switchcraft #151 - 1/4" Mono Barrel Jack
C$14.39
Belton
|sku: BE-T/S#2-50-26
Belton Tube Shield with Base - For 9-pin, Aluminum
C$2.39
Generic
|sku: WC-26G7SCBSI
Coax Wire - 26AWG Stranded Conductor, Braided Shield, Insulated - Black (by foot)
C$1.79
F&T
|sku: CE-C-ET100-100-FT
F&T Capacitor - Electrolytic, Axial Lead, 100µF 100V
C$6.59
Generic
|sku: TE-L78L05
IC - L78L05 Voltage Regulator 5V
C$0.69
Next Gen Parts
|sku: NG-GPH-0511-CH
Square Neck Plate - Chrome
C$7.99
Next Gen Parts
|sku: NG-GPS-FI1880652560
Cab Parts Screws - #8x3/4", Phillips, Oval, Stainless
C$0.39
Next Gen Parts
|sku: NG-KST-2078-CH
Barrel Knob for 6.35mm - Chrome
C$4.99
All Parts
|sku: AP-GS-0008-B02
Humbucker Mounting Ring Screws - #2x3/4”, Phillips, Flat, Gold
C$0.99-
CTS - A250K No-Load Tone Pot
Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: +-10%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 3/4"Bushing Thread: 3/8 x 32Bushing Diameter:...Terminal Strip - 8 Lug, 1st & 8th Lug Common, Horizontal (pkg 5)
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.Mini Switch - Short Bat DPDT On-On
Short-bat On-On Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat. Do be careful soldering to the terminals and use a heat sink if you can.Dome Knob for 6mm - Black
Fine textured black dome knob for split shaft pots. Sold individually. See alternate photo for dimensional drawing. SPECIFICATIONSOverall Height: 18mmBase Diameter: 18mmIdeal Shaft Fit: 6mmFit Type: *Set Screw *Please note that the set screw may be...9V Battery Terminals - Straight
9-volt battery terminals mounted on rigid plastic. Wires are 15cm long and come out of one side of the terminal. Sold individually.F&T Capacitor - Electrolytic, Axial Lead, 16µF 475V
Made in Germany 16uF/475V Axial lead electrolytic Made in Germany 0.63" dia. x 1.50" long Operating temperature range -40°C to 85°C Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in...Generic #236 - 1/4" Stereo Right Angle Plug
#236 style - 1/4" stereo right angle plug. Nickel plated steel.Switchcraft Switch Tip - Amber
MADE IN USA Switchcraft Switch Tip for Gibson Pickup Selectors, Amber Replacement for Gibson: PRTK-030Generic Black Knob - Choose Size
Generic Black Knobs. Multiple sizes available: SPECIFICATIONS Size Dimensions (D x H) Extra Small 5/8" x 19/32" Small 13/16" x 5/8" Medium 15/16" x 3/4" Large 1 3/8" x 11/16" Ideal Shaft Fit: Solid Shaft (6...C$0.99 - C$1.59Standard Tuners - Bean Chrome
Our standard tuners are modeled after the classic Gotoh style body. This version comes with bean buttons and a 14:1 gear ratio. The perfect upgrade to the stock OEM tuners found on standard 6L headstocks and tight fitting 3+3 headstocks...Capacitor Clamp - 1 3/8" Diameter
For mounting multi-section can capacitors in your vintage amp. 1 3/8" inner diameter.Switchcraft #151 - 1/4" Mono Barrel Jack
MADE IN USA Mono 2-Conductor 1/4" Jack. Requires 1/2" hole. Includes nut and washer. Tech's notes: "This type of jack uses a larger bushing and is meant to be mounted directly into wood. It is too large to fit any standard jack...Belton Tube Shield with Base - For 9-pin, Aluminum
Protect your preamp tubes with these professional aluminum tube shields. Mates with 9-pin tube sockets. Includes shield, base, and spring.Coax Wire - 26AWG Stranded Conductor, Braided Shield, Insulated - Black (by foot)
26AWG stranded (7/34) soft copper single conductor coax wire with a tinned copper braided shield and outer insulation. RG-174 Military Grade. Sold by the foot.Qty 1 = 12" long (1' long)Qty 3 = 36" long (3' long)Qty 10 = 120" long (10' long)etc. *Due...F&T Capacitor - Electrolytic, Axial Lead, 100µF 100V
Made in Germany Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability. 0.41" dia...IC - L78L05 Voltage Regulator 5V
The L78L05 fixed 5V regulator in a TO-92 case. Max current 100mA. PLEASE NOTE: Easily susceptible to heat damage. If you must solder directly, always use a heat sink. Ideally, you should use these with sockets.Square Neck Plate - Chrome
Neck Plate, 4 Hole, for Guitar or Bass, Chrome. Screws not included. Sold individually. See alternate photo for dimensional drawing.Cab Parts Screws - #8x3/4", Phillips, Oval, Stainless
Most commonly used on the following parts: Corner - 2-Leg Wraparound Nickel - Countersunk Recessed Black Plastic Pocket Handles Dogbone Style Handles Leather Style Handles Thread: #8Length FMS: 3/4"Head: Countersunk/OvalDrive: Phillips Sold...Barrel Knob for 6.35mm - Chrome
Metal barrel knobs. Sold individually. SPECIFICATIONSOverall Height: 19mmBase Diameter: 19mmIdeal Shaft Fit: Solid Shaft (6.35mm)Fit Type: *Set Screw *Please note that the set screw may be different than pictured, because the manufacturer sometimes...Humbucker Mounting Ring Screws - #2x3/4”, Phillips, Flat, Gold
Most commonly used as a mounting screw for tall humbucker rings on non-Gibson guitars. Thread: #2Length FMS: 3/4"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar...