Potentiometers

Alpha - A250K Split Shaft Pot (M8-0.75)

Taper: A / LogarithmicPercent @ Half Turn: 15%Resistance: 250KTolerance: 20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: Import / Coarse / 18 splineShaft Length FMS (from mounting surface): 20mmBushing Thread: M8x0.75Bushing Diameter:...

Alpha - Short Solid Shaft Pot (choose resistance)

Taper: (choose from menu)Percent @ Half Turn: A=20% (log), B=50% (linear), C=80% (rev.audio)Resistance: (choose from menu)Tolerance: +-20%Power Rating: 1/4WRegion Type: MetricShaft Type: 6.35mm Solid ShaftShaft Length FMS (from mounting surface):...

Alpha - Standard 18-Spline Pot (choose taper/resistance) CLEARANCE

Taper: A / Audio / LogarithmicResistance: Choose from optionsTolerance: +-20%Power Rating: 1/4WShaft Type: Import / Coarse / 18 SplineShaft Length FMS (from mounting surface): 3/4"Bushing Thread: 3/8-32Bushing Diameter: 3/8"Bushing Length: 3/8"Body...

Alpha - Standard 24-Spline Pot (choose taper/resistance) CLEARANCE

Taper: A / Audio / LogarithmicResistance: Choose from optionsTolerance: +-20%Power Rating: 1/4WShaft Type: USA / Fine / 24 SplineShaft Length FMS (from mounting surface): 3/4"Bushing Thread: 3/8-32Bushing Diameter: 3/8"Bushing Length: 3/8"Body Diameter:...

Alpha - Standard Solid Shaft Pot (choose taper/resistance)

*CLEARANCE: The A1M version is on clearance until sold out. Taper: A / Audio / LogarithmicResistance: Choose from optionsTolerance: +-20%Power Rating: 1/4WShaft Type: 6.35mm Solid ShaftShaft Length FMS (from mounting surface): 3/4"Bushing Thread:...

Alpha MINI - Split Shaft Potentiometer (solder)

*If there are values you need that are "Out of stock", check out the Vimex pots as a high quality alternative. Taper: (choose from menu)Resistance: (choose from menu)Tolerance: +-20%Power Rating: 1/2WShaft Type: 6mm Split ShaftShaft Knurl: Import /...

Alpha Pro - 24-Spline Pot (choose options)

Alpha was generous enough to build these custom pots to our specs.  We opted for brass shafts and bushings for longer life, tighter tolerances than most mainstream pots, and a custom audio taper that gives a smoother sweep than standard audio tapers...

Alpha Push-Pull - A250K Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: +-20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: Import / Coarse / 18 splineShaft Length FMS (from mounting surface): 19mmBushing Thread: 3/8" x 32Bushing...

Bourns - A250K Push-Pull Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: +-20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: Import / Coarse / 18 splineShaft Length FMS (from mounting surface): 19mmBushing Thread: 3/8" x 32Bushing...

Bourns - A250K Solid Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: +-20%Power Rated: 1/4WShaft Type: 6.35mm Solid ShaftShaft Length FMS (from mounting surface): 19mmBushing Thread: 3/8" x 32Bushing Diameter: 3/8"Bushing Length: 9.5mmBody...

Bourns - A250K Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: +-20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: Import / Coarse / 18 splineShaft Length FMS (from mounting surface): 19mmBushing Thread: 3/8" x 32Bushing...

CTS - 30A250K SOLID Shaft Pot (250K J Taper)

Taper: A / Audio / LogarithmicPercent @ Half Turn: 30% (CTS = J-taper; AKA: 30A250K)Resistance: 250KTolerance: 20%Power Rated: 1/3WShaft Type: 6.35mm Solid ShaftShaft Length FMS (from mounting surface): 3/4"Bushing Thread: 3/8"-32Bushing Diameter:...

CTS - A250K LONG Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: 20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 1 1/8"Bushing Thread: 3/8 x 32Bushing Diameter:...

CTS - A250K No-Load Tone Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: +-10%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 3/4"Bushing Thread: 3/8 x 32Bushing Diameter:...

CTS - A250K Short Solid Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: 10%Power Rated: 1/4WShaft Type: 6.35mm Solid ShaftShaft Length FMS (from mounting surface): 3/4"Bushing Thread: 3/8 x 32Bushing Diameter: 3/8"Bushing Length: 1/4"Body...

CTS - A250K Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: 10%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 7/8"Bushing Thread: 3/8 x 32Bushing Diameter:...

CTS - A250K Split Shaft Pot (M8-0.75) CLEARANCE

Taper: A / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: 10%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: Import / Coarse / 18 splineShaft Length FMS (from mounting surface): 20mmBushing Thread: M8x0.75Bushing Diameter:...

CTS MINI - A250K Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 20%Resistance: 250KTolerance: 10%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 3/4"Bushing Thread: 3/8 x 32Bushing Diameter:...

CTS Push-Pull - A250K Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: +-20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 3/4"Bushing Thread: 3/8 x 32Bushing Diameter:...

Dunlop Super Pot - A250K Solid Shaft

Dunlop's Super Pot potentiometers are high-performance volume/tone pots that are made to last a lifetime.  Resistant to dust and corrosion, they provide a smooth audio-style taper that will never sound noisy or scratchy.  They've been tested at...