Cliff S4 - 1/4" Stereo Switching Jack (6 lug; solder)

MADE IN UK Genuine Cliff S4 jack sockets incorporates Ni-Ag® alloy, self-cleaning contacts for superior performance and reliability.  All models have a durable, premium-quality, nylon body. 6 solder terminals, switched. Metal ferrule, vintage...

Celestion TF0818 - 100W 8ohm

8" driver providing 94dB sensitivity and 100Wrms (AES standard) power handling 1.75" high temperature copper voice coil wound on polyimide former for increased reliability Achieves optimal performance in compact enclosures Exceptional performance...

Celestion F12-X200 - 200W 8ohm

Finally, a dedicated guitar speaker for amp modellers and IRs. The F12-X200 is a truly full range driver that delivers a frequency response from 60Hz all the way up to 20kHz, the higher frequency part of the signal is reproduced using a Celestion...

Pickguard Blank - 4-ply Red Tortoise (11.5"x17")

4-ply plastic pickguard blank with celluloid top layer. Layers: White / Black / White / Red TortoiseDimensions: 11.5" x 17" x 0.090" (29.2cm x 43.2cm x 2.3mm) *Note: These are rough-cut blanks.  Dimensions listed are minimums.  Actual product...

Pickguard Blank - 4-ply Modern Tortoise (11.5" x 17")

4-ply plastic pickguard blank with celluloid top layer. Layers: White / Black / White / Modern TortoiseDimensions: 11.5" x 17" x 0.090" (29.2cm x 43.2cm x 2.3mm) *Note: These are rough-cut blanks.  Dimensions listed are minimums.  Actual...

Pickguard Blank - 4-ply White Pearloid (11.5" x 17")

4-ply plastic pickguard blank with celluloid top layer. Layers: White / Black / White / White PearloidDimensions: 11.5" x 17" x 0.090" (29.2cm x 43.2cm x 2.3mm) *Note: These are rough-cut blanks.  Dimensions listed are minimums.  Actual...

Plastic Binding - 0.5mm Black

Plastic binding for guitars, basses, and other stringed instruments. Dimensions: 0.5mm x 8mm x ~1650mm (0.020"x5/16"x~64.9")

Plastic Binding - 0.5mm White

Plastic binding for guitars, basses, and other stringed instruments. Dimensions: 0.5mm x 8mm x ~1650mm (0.020"x5/16"x~64.9")

2" Cotton Strap /w Leather Ends - Tweed

MADE IN CANADA 2" cotton weave strap with quality double stitched brown leather ends and a gold foil logo.  Adjustable from 32.5" to 57" (hole-to-hole). See alternate photos for views of reverse side and close up of stitching. Tech's notes: "If...

Pickguard Blank - 3-ply White/Black/White (11.5" x 17")

3-ply plastic pickguard blank. Layers: White / Black / WhiteDimensions: 11.5" x 17" x 0.090" (29.2cm x 43.2cm x 2.3mm) *Note: These are rough-cut blanks.  Dimensions listed are minimums.  Actual product may measure slightly larger.

Generic #12A - 1/4" Mono Jack (with tip shunt)

Mono 2-Conductor 1/4" Jack with Tip Shunt.  Open circuit.  Includes nut (3/8"-32 threading) and washer. Sold individually.

Footswitch Topper - Aluminum (choose colour)

Anodized aluminum footswitch toppers.  Available in a variety of colours.  Sold individually. These are great for colour coding your pedals as well as making your switches much easier to press.  These have dual set screws, allowing them...

Hammond 291BX - Power Transformer UPGRADE

MADE IN CANADA UPGRADE for (Deluxe, 5A3, 5B3, 5C3, 6G3, AB763) (Deluxe Reverb, A1172, A1270, AA763, AB763, AB868, Blackface, Silverface, W/Volume Boost) Tweed Tremolux UPGRADE to Fender part number 125P23D & 041316 Primary: 120/125VAC 60Hz ...

Hammond 291AX - Power Transformer UPGRADE

MADE IN CANADA UPGRADE for Fender (Bronco, AA764, AB764, Blackface, Silverface) (Champ, Tweed, 5C1, 5E1, 5F1, AA764, Blackface, Silverface, Vibro Blackface) (Harvard, 6G10) (Princeton Tweed, 5B2, 5C2, 5D2, 5E2, 5F2, 5F2A) (Princeton, Brown, AA964,...

CTS - B250K LONG Split Shaft Pot

Taper: B / LinearPercent @ Half Turn: 50%Resistance: 250KTolerance: 20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 1 1/8"Bushing Thread: 3/8 x 32Bushing Diameter: 3/8"Bushing...

CTS - A250K LONG Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: 20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 1 1/8"Bushing Thread: 3/8 x 32Bushing Diameter:...

Cliff S4 - 1/4" Mono Switching Jack (4 lug; solder)

MADE IN UK Genuine Cliff S4 jack sockets incorporates Ni-Ag® alloy, self-cleaning contacts for superior performance and reliability.  All models have a durable, premium-quality, nylon body. 4 solder terminals, switched. Metal ferrule, vintage...

Cliff S2 - 1/4" Mono Switching Jack (4 lug; solder)

MADE IN UK Genuine Cliff S2 jack sockets incorporates Ni-Ag® alloy, self-cleaning contacts for superior performance and reliability.  All models have a durable, premium-quality, nylon body. 4 solder terminals, switched. Used in modern Marshall...

Endpin Jack - 1/4" Stereo Black

Stereo 3-conductor endpin style 1/4" jack, commonly used on acoustic and hollow body guitars.  Tightens from the outside for easier installation.  Sold individually.  Includes all nuts and washers required for proper installation. Jack...

Barrel Jack - 1/4" Stereo Black

Stereo 3-conductor barrel style 1/4" jack.  Alternative to Switchcraft #152B. Requires 1/2" hole. Sold individually.  Includes nut and rubber washer. Jack sleeve/cover available sold separately. Tech's notes: "This type of jack uses a...