Terminal Strip - 8 Lug, 1st & 8th Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Terminal Strip - 3 Lug, 2nd Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Terminal Strip - 5 Lug, 3rd Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Ceramic - 8 Pin Octal Tube Socket (solder)

Ceramic Tube socket used for octal power tubes. Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”) Mounting Centers: 1-1/2” with oblong mounting holes See alternate photo for...

Ceramic - 9 Pin Mini Tube Socket (solder)

Ceramic tube socket commonly used for preamp tubes or EL84 power tubes. Chassis hole: 7/8” Mounting Centers: 1-1/8” Bottom or top mount See alternate photo for dimensional drawing.

Staking Tool - For Eyelets and Turrets

Turret staking tool. Directions: Drill ⅛" hole Insert eyelet Flip board over on to a hard service Center staking tool over the eyelet Strike staking tool with hammer to clamp eyelet to board See alternate photo for dimensional drawing.

Vulcanized Fiberboard - 3" x 15" x 0.062"

Vulcanized Fiberboard, used for laying out circuits using eyelets.  NOT pre-drilled. Size: 3" x 15" x 0.062"

Turret Board - Pre-drilled 300mm x 60mm x 2mm

Blank board 300mm x 60mm, 2mm thick Glass epoxy unclad laminate.

Toggle Switch - SPST Long Arm

Carling, 2 position, On-Off, SPST with solder lugs, ½" mounting hole. 3A 250V, 6A 125V, AC/DC See alternate photo for dimensional drawing.

Switch - Carling, Toggle, SPST, Short Arm

Carling 110-63 Fender® style power and/or standby switch (SPST). This switch is a great replacement for older Fender® amps where the shorter toggle length (1/2”) is desired. 3A 250V, 6A 125V, AC/DC See alternate photo for dimensional...

Hammond 290CAZ - Power Transformer

MADE IN CANADA Replacement for Ampeg GEMINI VI 25W Equivalent to manufacturer part number PT-113 Primary: 117VAC 60Hz Secondary: 625VCT @ 100mA6.3V @ 3A Features: Designed for drop in replacement of original units, though mounting holes may...

Hammond 290CZ - Power Transformer

MADE IN CANADA Replacement for Vox AC15C1 Primary: 120/240VAC 50/60Hz Secondary: 600VCT @ 120mA25V @ 250mA6.3V @ 4A Features: Designed for drop in replacement of original units, though mounting holes may not always match up perfectly...

Hammond 261D6 - Power Transformer

MADE IN CANADA Replacement for Fender 1964 Blackface 6G15 Reverb Equivalent to Fender part number 125P24A Primary: 120VAC 60Hz Secondary: 250VCT @ 50mA6.3V @ 1.1A Output: 5-15 W Features: Designed for drop in replacement of original units...

Bone Nut - Epiphone Style (slotted)

Bone nut for Epiphone® guitars, with string slots. 1 3/4" x 1/4" x 3/8"1 3/8" string spacing Tech's notes: "Replacement nuts and saddles typically measure slightly larger than necessary to ensure a tight fit.  The extra material is easily shaped...

Unbleached Bone Nut - Slotted for Gibson

Slotted unbleached bone nut for Gibson® electric guitars. Frequently used on Les Paul guitars. 1 11/16" x 3/16" x 3/8"1 3/8" string spacing. Tech's notes: "Replacement nuts and saddles typically measure slightly larger than necessary to ensure a...

Plastic Acoustic Bass Bridge Pin - Cream

Cream plastic bridge pins for acoustic bass, with groove. 1 and 7/16 inch long, .324 inch under the collar and .312 inch at the tip. Sold individually. *Matching Cream Parts?  See our blog post regarding the frustrating truth about cream parts!

Plastic Acoustic Bass Bridge Pin - Black

Black plastic bridge pins for acoustic bass, with groove. 1 and 7/16 inch long, .324 inch under the collar and .312 inch at the tip. Sold individually.

Bone Nut - Fender Style Flat (slotted)

Slotted, Radiused Bone Nut with Flat Bottom 1 11/16" x 1/4" x 1/8".1 3/8" string spacing, 12 inch radius. Tech's notes: "Replacement nuts and saddles typically measure slightly larger than necessary to ensure a tight fit.  The extra material is...

Eminence Deltalite II 2510 - 250W 8ohm

Recommended for professional audio as a mid/hi or full-range and monitor; also for bass guitar. Works well in sealed or vented enclosures. SPECIFICATIONSNominal Diameter: 10.0", 254mmNominal Impedance: 8 ohmsPower: 250w rms, 500w programFreq...

Celestion K12H-200TC - 200W 8ohm

12" twin cone drive unit with extended high frequency response. 2" high temperature copper voice coil for increased reliability and 200Wrms (AES standard) power handling. Optimized cone neck/voice coil assembly for increased strength, minimizing high...