Belton - 8 Pin Octal Tube Socket (solder)

High insulated 8-pin tube socket commonly used for octal power tubes. Fits into a 1 3/16" chassis hole with bolt/rivet spacing of 1 7/16" to 1 11/16". Applicable for use in all types of electric and electronic equipment using vacuum tubes...

Piping - Large 1/2"x3/16" White (by foot)

MADE IN CANADA 3/16" hollow bead with a 3/8" staple flange.  Nominally 1/2" overall size.  Comparable to large Marshall style cabinet piping. Sold by the foot.  Bulk rolls available upon request (1000' per roll). *Due to the fact that...

Graph Tech PQL-5000-00 - TUSQ XL Slotted Fender Nut

MADE IN CANADA The PQL-5000-00 is a perfect option to replace and upgrade the nut in Fender style electric guitars with a 9.5" radius.  It will work in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the...

Eminence Alpha 12A - 150W 8ohm

Recommended for professional audio mid bass applications in a small sealed or medium vented enclosure. SPECIFICATIONS Nominal Diameter: 12", 304.8mm Nominal Impedance: 8 ohms Power: 150w rms, 300w program Freq. Response: 51Hz-4.3 kHz Sensitivity: 95.6...

Generic Black Knob - Choose Size

Generic Black Knobs.  Multiple sizes available: SPECIFICATIONS Size Dimensions (D x H) Extra Small 5/8" x 19/32" Small 13/16" x 5/8" Medium 15/16" x 3/4" Large 1 3/8" x 11/16" Ideal Shaft Fit: 1/4" Solid...

Chassis Strap - Long

Long (5 5/8" length) nickel chassis strap, 5" hole spacing.  Used to mount the amp chassis in its wooden cabinet. Sold individually.  Does not include mounting hardware.

Chassis Strap - Medium

Medium (4 5/8" length) nickel chassis strap, 4" hole spacing.  Used to mount the amp chassis in its wooden cabinet. Sold individually.  Does not include mounting hardware.

Chassis Strap - Small

Small (3 5/8" length) nickel chassis strap, 3" hole spacing.  Used to mount the amp chassis in its wooden cabinet. Sold individually.  Does not include mounting hardware.

Capacitor - Orange Drop 100V-200V (choose value)

Voltage: 100V-200V (varies, depending on stock order; both appropriately sized for guitar use)Tolerance: +-10%Type: PolyesterLead Style: Standard RadialRoHS Compliant See options to choose capacitance. Sold individually. Buy in bulk, mixing and...

1/2W Carbon Composition Resistors (Pkg 5)

Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types. Standard 'classic'...

Pickup Mounting Screws - #6-32 x 3/4", Phillips, Oval, Stainless

Most commonly used for mounting single coil pickups like Strat and Tele pickups.  Same thread/pitch as CRL and Oak Grigsby switch mounting screws. Thread: #6-32Length FMS: 3/4"Head: Countersunk / OvalDrive: Phillips Sold individually. See...

Dunlop Flush Mount Strap Locks - Black (pair)

Dunlop® Flush Mount Strap Lock System (2), Black; Push to Release Sold as a pair. *Recommend the assistance of a professional guitar tech for installation!

Dunlop Flush Mount Strap Locks - Gold (pair)

Dunlop® Flush Mount Strap Lock System (2), Gold; Push to Release Sold as a pair. *Recommend the assistance of a professional guitar tech for installation!

Dunlop Flush Mount Strap Locks - Nickel (pair)

Dunlop® Flush Mount Strap Lock System (2), Nickel; Push to Release Sold as a pair. *Recommend the assistance of a professional guitar tech for installation!

Marshall Style Gold Top Knob

Marshall style gold top knobs with brass bushing.  Sold individually. SPECIFICATIONSOverall Height: 5/8"Base Diameter: 3/4"Ideal Shaft Fit: 1/4" Solid Shaft (6.35mm)Fit Type: *Set Screw *Please note that the set screw may be different than...

Marshall Style Chrome Top Knob

Marshall style chrome top knobs with brass bushing.  Sold individually. SPECIFICATIONSOverall Height: 5/8"Base Diameter: 3/4"Ideal Shaft Fit: 1/4" Solid Shaft (6.35mm)Fit Type: *Set Screw *Please note that the set screw may be different than...

Generic - 1/4" Stereo Switching Jack (6 lug; solder)

Stereo 3-Conductor 1/4" Jack with tip, ring, and sleeve shunts. Closed Circuit. Sold individually.  Includes nut and washer.

Footswitch - SPDT On-On Latching (solder)

Material: Nickel Plated Brass Switch: Standard Click Function: SPDT ON-ON Latching Terminals: 3-pin Solder Bushing Diameter: 7/16" Bushing Length: 7/16" Jon's notes: "Requires a depth of 7/8" minimum...

Footswitch - SPDT On-(On) Momentary (solder)

Material: Nickel Plated Brass Switch: Standard Click Function: SPDT ON-(ON) Momentary Terminals: 3-pin Solder Bushing Diameter: 7/16" Bushing Length: 7/16" Jon's notes: "Requires a depth of 7/8" minimum...

Footswitch - DPDT On-(On) Momentary (solder)

Material: Nickel Plated Brass Switch: Standard Click Function: DPDT ON-(ON) Momentary Terminals: 6-pin Solder Bushing Diameter: 7/16" Bushing Length: 7/16" Jon's notes: "Requires a depth of 7/8" minimum...