Amplifier Parts

Indicator Light - Marshall style, Red Square, 6.3V

Square indicator light rated for 6.3 Volts. Measures 0.4" length x 0.4" width x 0.12" depth.  Leads are 8" long.  Requires 3/8" mounting hole. This style of square red indicator light is similar to those found on many Marshall amps. The built...

Insulator - 4 Section, for FP Can Capacitors

Phenolic insulator for mounting 4 section (1-⅜" diameter) FP type can capacitors. Fits all 1-⅜" diameter CE Mfg can capacitors.

Mounting Plate - Metal, for 1.375" Can Capacitor

Metal plate for mounting 4 section (1-⅜" diameter) FP type can capacitors.

Nut - #6-32, Keps with external tooth, Zinc (pkg 10)

Most commonly used for mounting tube sockets and other parts to an amp chassis.  Popular low-cost lock nut for multiple commercial and industrial applications.  Auto-locks as it is tightened. Thread: #6-32 Sold in packs of 10. Tech's notes:...

Nut - #8-32, Keps with external tooth, Zinc (pkg 10)

Most commonly used for chassis strap screws.  Popular low-cost lock nut for multiple commercial and industrial applications.  Auto-locks as it is tightened. Thread: #8-32 Sold in packs of 10. Tech's notes: "Screw and spring sizes/types are...

PCB - Daughterboard for Wiring 3PDT Footswitches

The 3PDT PCB daughterboard (P-PC-3PDT-BOARD) is a small board designed to simplify the wiring of 3PDT footswitches in guitar pedals. All inputs and outputs are clearly labeled on the PCB, removing any confusion about how the footswitch should be wired,...

Pilot Lamp Holder - Common Style

MADE IN USA Amp pilot lamp holder commonly used by many brands. 9/16"-27 jewel thread Fits most US-made amps and jewels Bayonet base - fits most T-2 and T-3 miniature bayonet lamps LED version lamps/bulbs will NOT fit this holder Requires...

Pilot Lamp Holder - Fender Style

Fender style lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps. These are also referred to as pilot light holders. 11/16" chassis hole Total Length = 1.475" Threading: 9/16 - 27

Power Cord - 16AWG Bare End 3 Conductor (12 feet)

Power Cord - (3 conductor) Bare End, 12 feet, 16 AWG.  Cable is 11/32" diameter.

Power Cord - 16AWG Bare End 3 Conductor (8 feet)

Power Cord - (3 conductor) Bare End, 8 feet, 16 AWG.  Cable is 11/32" diameter.

Power Cord - 18AWG IEC Cable (12 feet)

Three conductor, 12 foot detachable power cord with IEC female end SVT (Marshall type), 18 awg.

Power Cord - 18AWG IEC Cable (8 feet)

Three conductor, 8 foot detachable power cord with IEC female end SVT (Marshall type), 18 awg.

Prototyping Stripboard - For Pedals (94mm x 53mm)

Pre-drilled, cleaned, and easy to score & snap. 94mm x 53mm

Reverb Module - Accutronics Belton BTDR-2H (choose options)

A great digital reverb sound that easily replaces a spring reverberation unit. Horizontal mount. Features: Stereo outputs may be summed for mono operation Simple interface requires only input, output, +5V, and ground AC-coupled input and outputs...

Reverb Module - Accutronics Belton BTDR-3H

A great digital reverb sound that easily replaces a spring reverberation unit Features: Reverb depth (decay adjustable via 2 external resistors or 1 dual potentiometer Stereo outputs may be summed for mono operation Simple interface: input, output,...

Reverb Tank - MOD 4AB1C1B

Read our Reverb Tank Code System Explained blog to better understand how to find the right replacement for your amp! Replaces: 4AB1C1B Solid, sturdy construction Type: Long (2 Spring) tank Decay: short decay Input: 8 Ω Output: 2,250...

Reverb Tank - MOD 4AB3C1B

Read our Reverb Tank Code System Explained blog to better understand how to find the right replacement for your amp! Replacement Reverb Tank for 4AB3C1B Solid, Sturdy Construction Long (16 ¾") 2 Spring Unit , Long Decay (2.75-4.0...

Reverb Tank - MOD 4BB2A1B

Read our Reverb Tank Code System Explained blog to better understand how to find the right replacement for your amp! Replaces: 4BB2A1B Solid, sturdy construction Type: Long (2 Spring) tank Decay: Medium decay Input: 150 Ω Output: 2,250...

Reverb Tank - MOD 4BB3C1B

Read our Reverb Tank Code System Explained blog to better understand how to find the right replacement for your amp! Replacement Reverb Tank for 4BB3C1B Solid, Sturdy Construction Long (16 ¾") 2 Spring Unit , Long Decay (2.75 - 4.0...

Reverb Tank - MOD 4BB3C1D

Read our Reverb Tank Code System Explained blog to better understand how to find the right replacement for your amp! Replaces: 4BB3C1D Solid, sturdy construction Type: Long (2 Spring) tank Decay: long decay Input: 150 Ω Output: 2,250...