Gotoh CP-10 Tele Control Plate - Chrome (for USA)

Control plate for telecaster.  Comes with screws.  Should fit most models made in USA, Japan, and Mexico. See alternate photo for dimensional drawing. *Always double check the measurements of your needs against those provided in the...

Gotoh 35G450 Classic Tuners - 3+3 Nickel

MADE IN JAPAN The 35G450 classic tuners from Gotoh feature a decorative Lyra design and a 1:14 gear ratio. Package includes all necessary mounting hardware. See alternate photo for dimensional drawing.

Gotoh 35G450 Classic Tuners - 3+3 Gold

MADE IN JAPAN The 35G450 classic tuners from Gotoh feature a decorative Lyra design and a 1:14 gear ratio. Package includes all necessary mounting hardware. See alternate photo for dimensional drawing.

Deep Nut - Fine Knurl, Nickel for Switchcraft Switches (15/32"-32)

Made in USA Deep thread nut for use with Switchcraft switches. Used on some models of Gibson® guitars and other brands where the threading of the switch isn’t able to protrude through the body enough. Switchcraft toggles come stock with a flat...

Next Gen - 20AWG Mini Instrument Cable - By Foot

Designed by Canadians and built for Canadians!  Our mini guitar cable uses a 20AWG main conductor for a lower capacitance than the equivalent competitor's cable, which means more clarity and less tonal loss on larger boards.  It is reinforced...

Acoustic Pickguard with Adhesive Backing - Thin White Pearloid CLEARANCE

Thin tear-drop shaped acoustic pickguard with adhesive backing.  Fits Martin D28 and other similar sized guitars/soundholes. Measurements: 180mm x 102mm x 0.8mm thick with a 66mm radius

Acoustic Pickguard with Adhesive Backing - Vintage Tortoise

Thin tear-drop shaped acoustic pickguard with adhesive backing.  Fits Martin D28 and other similar sized guitars/soundholes. Measurements: 180mm x 102mm x 0.8mm thick with a 66mm radius

Acoustic Pickguard with Adhesive Backing - Thin Clear

Thin tear-drop shaped acoustic pickguard with adhesive backing.  Fits Martin D28 and other similar sized guitars/soundholes. Measurements: 180mm x 102mm x 0.8mm thick with a 66mm radius

Acoustic Pickguard with Adhesive Backing - Thin White

Thin tear-drop shaped acoustic pickguard with adhesive backing.  Fits Martin D28 and other similar sized guitars/soundholes. Measurements: 180mm x 102mm x 0.8mm thick with a 66mm radius

Unbleached Bone - Compensated Acoustic Saddle

Unbleached compensated bone saddle for acoustic guitar. 16 inch radius Length 75 mm Height 9 mm Thickness 3 mm *Unbleached bone looks different every time with colours ranging from nearly white to creamy to almost "orangy" in tone.**Please note that if...

Transistor - 2N2222A

The 2N2222A NPN transistor. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N3904

Another versatile NPN transistor called for in many circuits. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC547

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC550

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC337

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA12

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA18

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA42

This is a classic transistor used in many designs over the years. Current Rating: 0.5AVoltage Rated: 300VTransistor Type: NPN PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when...

5mm LED - Ultraviolet

5mm UV LED with a water clear lens. Forward voltage (V): 3.4-3.6V

Diode - BAV21

The BAV21 is a switching diode in a DO35 type package. SpecificationsPeak Reverse Voltage: 250 VForward Continuous Current: 0.25 AMax Surge Current: 1 AConfiguration: SingleForward Voltage Drop: 1 V at 0.1 AReverse Current IR: 0.1uAMaximum Power...