Diode - BAT46

The BAT46 is a Schottky Barrier diode in a DO35 type package. SpecificationsPeak Reverse Voltage: 100 VForward Continuous Current: 0.15 AMax Surge Current: 0.75 AConfiguration: SingleForward Voltage Drop: 1 V at 0.25 AMaximum Reverse Leakage...

Diode - 1N4746

The 1N4746 is a 1W 18V Zener diode in a DO41 type package. SpecificationsNumber of Rectifiers: SingleDiode / Rectifier Type: ZenerVoltage Rating: 18VPower: 1W PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the...

Diode - 1N4742

The 1N4742 is a 1.3W 12V Zener diode in a DO41 type package. SpecificationsNumber of Rectifiers: SingleDiode / Rectifier Type: ZenerVoltage Rating: 12VPower: 1.3W PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the...

Diode - 1N4732

The 1N4732 is a 1W 4.7V Zener diode in a DO41 type package. SpecificationsNumber of Rectifiers: SingleDiode / Rectifier Type: ZenerVoltage Rating: 4.7VPower: 1W PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the...

Diode - 1N916

The 1N916 is a high conductance 100V 200mA diode in a DO35 type package. SpecificationsVoltage Rating: 100VCurrent Rating: 200mA PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat...

Diode - 1N5819

The 1N5819 is a 1A 40V Schottky Barrier diode in a DO41 type package. SpecificationsNumber of Rectifiers: SingleDiode / Rectifier Type: SchottkyForward Continuous Current: 1AReverse Voltage: 40V PLEASE NOTE: Never bend the leads in such a way...

CopperSound DIY - Dual Gang Pot Adapter (choose type)

The Dual Gang Pot  Adapter accommodates a dual gang potentiometer into breadboards. Choose between 11 different pot values – A10K, A50K, A100K, A500K, B10K, B50K, B100K, B250K, B500K, B1M, C500K. These come with all included parts, along...

CopperSound DIY - Toggle Switch Adapters (choose type)

Small toggle switch adapters designed to allow commonly-sized pedal components to fit into standard breadboards. These come with all included parts, along with an assembly diagram.

CopperSound DIY - Precut & Stripped Wire (100pcs; choose options)

If you’re prototyping, you need pre-cut wire.  22AWG solid core hook-up wire cut to length and stripped at the end for quick and convenient hook up in pedals.  This wire is also great for use in breadboards.  The pre-cut length helps...

CopperSound DIY - 9V Breadboard Battery Snap

Easily connects 9 volt batteries to breadboards and circuit boards.

CopperSound DIY - Breadboard (choose type)

Integrated breadboards that are convenient and simple for prototyping!  These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED.  Along with pin headers to easily connect to the breadboard and power bus...

CopperSound DIY - Substitution Box (choose type)

The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to...

CopperSound DIY - Solder Dispenser

This Solder Dispenser is a unique tool to hold rolls of solder!  Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram.

SoZo Capacitor - NexGen Blue Molded Vintage, Axial (choose value)

The BlueMolded line of polyester film capacitors are retrofits for Astron or Blue Molded caps used in vintage tweed, brown, and blackface Fenders®. These capacitors amazingly capture vintage Fender® tones of the Blackface era, and the famous 1959...

Locking Tuners - Mini Gold

Our locking standard tuners are modeled after the modern Schaller style body and locking wheel.  This version comes with bean buttons and a 19:1 gear ratio for fast and accurate tuning.  The perfect upgrade to the stock OEM tuners found on...

Schaller Megaswitch - Pair of Knobs/Tips (choose finish)

Pair of switch tips for Schaller Megaswitches.  May fit other import switches as well, but you'd need to confirm by comparing the slot size to your needs. Available in black, chrome, gold, nickel, ruthenium, satin chrome, satin pearl, and white...

Hammond 1434-26 - Aluminum Chassis Plate 16x8

MADE IN CANADA Natural aluminum finish. Exterior dimensions: 16"x8" Does not include screws.

Hammond 1434-22 - Aluminum Chassis Plate 12x8

MADE IN CANADA Natural aluminum finish. Exterior dimensions: 12"x8" Does not include screws.

Hammond 1434-16 - Aluminum Chassis Plate 10x6

MADE IN CANADA Natural aluminum finish. Exterior dimensions: 10"x6" Does not include screws.

Hammond 1431-26BK3 - Black Chassis Plate 16x8

MADE IN CANADA 20 gauge steel. Black powder coated finish. Exterior dimensions: 16"x8" Does not include screws.