Bridge Mounting Screws - #5 x 1", Phillips, Flat, Gold

Most commonly used for mounting flat/fixed bridges to solid body instruments. Thread: #5Length FMS: 1"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry...

Footswitch Box - for Fender®, Two Button, Vintage, RCA Plug - Black

Order a replacement or add flexibility to your amp! Shielded wire with RCA plugs for vintage-style Fender amps. 12' cable. Replacement for Fender part number 0994051000.

Footswitch Box - for Fender®, Two Button, Vintage, RCA Plug - Chrome

Order a replacement or add flexibility to your amp! Shielded wire with RCA plugs for vintage-style Fender amps. 12' cable. Replacement for Fender part number 0994051000.

Graph Tech Ratio Locking Tuners - 6-inline Contemporary Mini (choose options)

The PRL-8721 are sets of Locking RATIO® Calibrated Machine Heads for electric guitar that use 6-in-line tuners. Contemporary mini style buttons. It has a two pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates. 4...

String Saver Originals - Strat & Tele Saddles 2 1/16" String Spacing (set of 6)

The PS-8000-00 is a perfect upgrade or replacement set of saddles for your Strat or Tele-style guitar.  They have a center intonation screw and a 2 1/16" string spacing. Included with the set is an extra set of slightly longer intonation screws...

Coiled Fret Wire - 051x100 Nickel/Silver (per pound)

Jescar high quality fret wire.  See product pics for dimensions. Sold by the coiled pound, pre-radiused to approximately 10". 1lbs ≈ 47.7 feet PLEASE NOTE: When you add this to your order, and in all future order processing, it will show...

Fret Wire Set - 051x100 Nickel/Silver, 10” Radius (25pcs)

Jescar high quality fret wire pre-cut to quantities of 25 pieces at 2.75" long and pre-radiused to approximately 10".  Long enough for standard 7-string guitars and 4-string basses. Crown dimensions are 0.100" wide and 0.051" tall. Tang depth: 0...

Strat Pickup Cover Set - 52.5mm (choose colour) CLEARANCE

MIA/MIM spec strat pickup covers for 52.5mm pole spacing. Available in multiple colours (choose from the options). Sold as a set of 3 covers. See alternate photo for dimensional drawing. Tech's Notes: "These should fit most strat pickups with a 52...

Backplate Control Cover - Les Paul Set (choose colour)

These will fit MOST genuine right-handed Gibson® Les Paul® made after 2008.  We say "most" because there are countless little variations between specific models and years of manufacturing, so there is always a chance it may not fit yours...

Tremolo Cover - 6-Hole Style (choose colour)

These should be a good fit on MOST genuine right-handed Fender® MIA and MIM Stratocasters® made after 2002.  We say "most" because there are quite literally thousands of little variations in screw hole patterns and cutout shapes...

Tremolo Cover - Modern Style (choose colour)

These should be a good fit on MOST genuine right-handed Fender® MIA and MIM Stratocasters® made after 2002.  We say "most" because there are quite literally thousands of little variations in screw hole patterns and cutout shapes between...

Footswitch Box - for Marshall, One Button, LED

Replacement Footswitch for Marshall Amps. One Button. Light-Up LED. ¼" Plug. Generic version of Marshall PED801. 15' length. Compatible with: Valvestate model VS65R and others Note: LED must receive power externally from the amp (i.e. no battery...

IC - Xvive MN3009, BBD, 256 Stage

The XVive MN3009 is a drop-in replacement for the original Panasonic 256-stage MN3009 BBD chip used in many chorus, vibrato, and flanger pedals and effects. The MN3009 is a 256-stage BBD that boasts a wide dynamic range and low distortion. Its signal...

IC - Xvive MN3005, BBD, 4096 Stage

The XVive MN3005 is a drop-in replacement for the original Panasonic 4096-stage MN3005 BBD chip used in many delay pedals and effects. Xvive Audio’s first-ever product was the MN3005: a re-creation of the legendary bucket brigade chip used in the...

IC - Xvive MN3007, BBD, 1024 Stage

The XVive MN3007 is a drop-in replacement for the original Panasonic 1024-stage MN3007 BBD chip used in many chorus, vibrato, and flanger pedals and effects. The MN3007 is a 1024-stage, low-noise, long-delay BBD that provides a signal delay of up to 51...

Turret Strip - Socket Mount , Gold Plated Copper, 6 Turrets

Single row turret strips with a tab for mounting directly to tube socket mounting holes. The screw mount turrets are made of gold plated brass and are pre-mounted to the 2mm thick boards. The mounting hole is 0.15” in diameter. These turret strips...

Turret Strip - Socket Mount , Gold Plated Copper, 4 Turrets

Single row turret strips with a tab for mounting directly to tube socket mounting holes. The screw mount turrets are made of gold plated brass and are pre-mounted to the 2mm thick boards. The mounting hole is 0.15” in diameter. These turret strips...

CE Capacitor - Electrolytic, Multi-Section, Can, 40/40/20/20µF 525V

MADE IN USA CE Manufacturing USA made multi section can capacitor. Made to Mallory specs using original Mallory machinery. 40/40/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 55°C Temperature Rating. 1-⅜"...

Flying Saucer Skirt Knob - Numbered (choose size)

Flying saucer skirt knobs with numbers.  Bass bushing for added quality and durability.  Multiple sizes available: SPECIFICATIONS Size Dimensions (D x H) Small 24mm x 14mm Medium 29mm x 19mm Large 37mm x...

Pickguard - Stratocaster 11-Hole, Tremolo, HSS (choose colour)

These should be a good fit on MOST genuine Fender® MIA and MIM Stratocasters® made after 2002.  We say "most" because there are quite literally thousands of little variations in screw hole patterns and shapes between all the...