Mini Switch - Extra Short Bat DPDT On-On-On

Extra short-bat On-On-On (type 2) Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Ruby Tubes - JJ 5881 (matched pair)

The 5881 is a beam power pentode with a maximum plate dissipation of 23W in the classical short bulb. It is very similar to the 6L6 sound but with less power. It can be used in any 6L6 amplifier. All RUBY™ Tubes come already Matched with a 6 Month...

Eminence Legend BP102 - 200W 8ohm

Recommended for professional bass guitar applications in a sealed or vented enclosure. Works well in single or multi driver designs. SPECIFICATIONS Nominal size: 10", 254.0 mm Nominal Impedance: 8 ohms Power: 200w rms, 400w program Freq. Response: 35...

Tube Damper Rings - High Temperature Silicone, Red

High temperature silicone damper / dampener rings great for remedying microphonic oscillations and tube rattle.  These red dampening rings are rated for temperatures up to 260°C and come in various sizes to fit a variety of tubes. 20mm ID:...

Hammond 1750L - Output Transformer - 4.2K, 4 OHM, PP, 60W

MADE IN CANADA Replacement for Bassman*, Hot rod Deville*, Concert II*. Equivalent to manufacturer part number #022871, 125A13A Specifications: Primary: 4,200 C.T.Ω Secondary: 4Ω Power: 60 W Amp...

Eyelet Board - Bias Board Set

Bias fiberboard set including the eyelet board and bottom insulator for reverb amplifier builds. This set is a recreation of the original bias boards found in various classic reverb amps ranging from 12 to 45 watts. Originals were closely referenced to...

Eyelet Board - 22W AB763 Capacitor Board Set

Deluxe Reverb style Capacitor fiberboard set including the eyelet board and bottom insulator for a 22 watt AB763 reverb amplifier build. This set is a recreation of the original capacitor board found in the classic 22 watt AB763 reverb amps. Originals...

Eyelet Board - Reverb Main Board Set, for AB763

Deluxe Reverb, Super Reverb, Twin Reverb style Main fiberboard set including the eyelet board and bottom insulator for a AB763 reverb amplifier build. This set is a recreation of the original boards found in the classic 22 to 85 watt AB763 reverb amps...

Panel - Blackface Style, AB763 Rear, Reverb Amps

Deluxe Reverb, Super Reverb, Twin Reverb style Mid-60s blackface style rear panel for AB763 reverb amplifiers. The AB763 includes a series of 22 to 85 watt dual channel amps with tone controls, an optical vibrato effect, and a spring reverb effect. The...

Panel - Blackface Style, AB763 Front, 22W Reverb Amp

Deluxe Reverb style Mid-60s blackface style front panel for the AB763 22W reverb amplifier. The 22W AB763 is a dual channel, mid-power amp with tone controls, an optical vibrato effect, and a spring reverb effect. The layout and fonts used on this plate...

Chassis - Blackface Style, AB763, 22W Reverb Amp

Deluxe Reverb style Mid-60s blackface style chassis for the AB763 22W reverb amplifier. The 22W AB763 is a dual channel, mid-power amp with tone controls, an optical vibrato effect, and a spring reverb effect. This chassis is compatible with the popular...

Panel - Blackface Style, AA1164 Rear, 12W Reverb Amp

Princeton Reverb style Mid-60s blackface style rear panel for the AA1164 12W reverb amplifier. The AA1164 is a single channel, mid-power amp with tone controls, an all-tube vibrato effect, and a spring reverb effect. The layout and fonts used on this...

Panel - Blackface Style, AA1164 Front, 12W Reverb Amp

Princeton Reverb style Mid-60s blackface style front panel for the AA1164 12W reverb amplifier. The AA1164 is a single channel, mid-power amp with tone controls, an all-tube vibrato effect, and a spring reverb effect. The layout and fonts used on this...

Chassis - Blackface Style, AA1164, 12W Reverb Amp

Princeton Reverb style Mid-60s blackface style chassis for the AA1164 12W reverb amplifier. The AA1164 is a single channel, mid-power amp with tone controls, an all-tube vibrato effect, and a spring reverb effect. This chassis is compatible with the...

Eyelet Board - Reverb Main Board Set, for AA1164

Main fiberboard set including the eyelet board and bottom insulator for an AA1164 reverb amplifier build. This set is a recreation of the original boards found in the classic 12 watt AA1164 reverb amps. Originals were closely referenced to provide the...

Pilot Lamp Holder - Fender Style

Fender style lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps. These are also referred to as pilot light holders. 11/16" chassis hole Total Length = 1.475" Threading: 9/16 - 27

Combo Cabinet - AB763, 22W Reverb Amp, Blackface Deluxe Reverb

This 22W AB763 amplifier cabinet provides the perfect housing for your 22W blackface-style reverb amp build. Crafted to replicate the iconic look and dimensions of the vintage 22W AB763, this cabinet is ideal for builders seeking authentic tone and...

Combo Cabinet - AA1164, 12W Reverb Amp, Blackface Princeton Reverb

This AA1164 amplifier cabinet provides the perfect housing for your 12W blackface-style reverb amp build. Crafted to replicate the iconic look and dimensions of the vintage AA1164, this cabinet is ideal for builders seeking authentic tone and aesthetics...

Combo Cabinet - 5E3, 12W Amp, Tweed Deluxe

This 5E3 amplifier cabinet provides the perfect housing for your 12W tweed-style amp build. Crafted to replicate the iconic look and dimensions of the vintage 5E3, this cabinet is ideal for builders seeking authentic tone and aesthetics. Experience the...

Combo Cabinet - 5F1, 5W Amp, Tweed Princeton

This 5F1 amplifier cabinet provides the perfect housing for your 5W tweed-style amp build. Crafted to replicate the iconic look and dimensions of the vintage 5F1, this cabinet is ideal for builders seeking authentic tone and aesthetics. Experience the...