Tolex Glue - Brush-on (1gal)

CAUTION!!!  This product may become damaged when shipping through sub-zero temperatures.  Order AT YOUR OWN RISK from November to April.  There are NO REFUNDS for ineffective product that was shipped during these months. For local...

Cab Corner/Plate Screws - #8 x 1/2", Phillips, Truss, Black

Most commonly used to mount speaker cabinet corners, large speaker jack plates, and handles with flat mounting screw surfaces.  These high quality screws are built stronger and more durable than imported versions. Thread: #8Length FMS: 1/2"Head:...

Bridge Mounting Screws - #5 x 1", Phillips, Flat, Nickel

Most commonly used for mounting flat/fixed bridges to solid body instruments. Thread: #5Length FMS: 1"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry...

Switch Mounting Screws - #6-32 x 1/2", Phillips, Oval, Stainless

Most commonly used for mounting CRL and Oak Grigsby Switches to pickguards and wood surfaces with countersunk screw holes.  Same thread/pitch as single coil pickups, like Strat and Tele pickups. Thread: #6-32Length FMS: 1/2"Head: Countersunk /...

Telecaster Pickup Cover - Tall Neck Black CLEARANCE

Plated pickup covers for telecaster neck pickups.  Base material is nickel/silver for minimal tonal impact. Sold individually. See alternate photo for dimensional drawing. Tech's Notes: "ALWAYS double check the dimensional drawings provided prior...

Telecaster Pickup Cover - Tall Neck Gold CLEARANCE

Plated pickup covers for telecaster neck pickups.  Base material is nickel/silver for minimal tonal impact. Sold individually. See alternate photo for dimensional drawing. Tech's Notes: "ALWAYS double check the dimensional drawings provided prior...

Bass Tuners - Standard E Black CLEARANCE

Our modern styled standard tuners look good, are butter smooth, and hold their tune with the best of them.  These are great for a new build or as an upgrade on your imported guitars. Sold individually.  Available in both treble (right side of...

Standard Tuners - Bean Black

Our standard tuners are modeled after the classic Gotoh style body.  This version comes with bean buttons and a 14:1 gear ratio.  The perfect upgrade to the stock OEM tuners found on standard 6L headstocks and tight fitting 3+3 headstocks...

Locking Tuners - Bean Gold

Our locking standard tuners are modeled after the modern Schaller style body and locking wheel.  This version comes with bean buttons and a 19:1 gear ratio for fast and accurate tuning.  The perfect upgrade to the stock OEM tuners found on...

Locking Tuners - Bean Black

Our locking standard tuners are modeled after the modern Schaller style body and locking wheel.  This version comes with bean buttons and a 19:1 gear ratio for fast and accurate tuning.  The perfect upgrade to the stock OEM tuners found on...

Eminence KL3010LF - 450W 8ohm

10" High power subwoofer recommended for vented and horn loaded enclosures. SPECIFICATIONSNominal Diameter: 10", 254.0mmNominal Impedance: 8 ohmsPower: 450w rms, 900w programFreq. Response: 45.0 Hz-1.6 kHzSensitivity: 92.0 db 1w/1mMagnet Weight: 11.0...

Inlay Dots - 1/4" Red (pkg 50)

ABS plastic inlay dots.  1/4 inch (6.35 mm) diameter and 3mm thickness. Bag of 50 pieces.

Inlay Dots - 6mm White (pkg 50)

ABS plastic inlay dots.  6 mm diameter and 3mm thickness. Bag of 50 pieces.

Inlay Dots - 6mm Cream (pkg 50)

ABS plastic inlay dots.  6 mm diameter and 3mm thickness. Bag of 50 pieces. *Matching Cream Parts?  See our blog post regarding the frustrating truth about cream parts!

Inlay Dots - 6mm Black (pkg 50)

ABS plastic inlay dots.  6 mm diameter and 3mm thickness. Bag of 50 pieces.

Jack Plate - Square Plastic White

Flat square plastic jack plate.  Sold individually.  Includes mounting screws. Outer Dimensions: 33m x 33m x 2mmScrew Hole Spacing: 23mm on centerJack Hole Diameter: 10mm Tech's notes: "These are replacements for import guitars.  Double...

Classic Bass Bridge 4-string - Gold CLEARANCE

This is a top quality cast bridge with brass barrel saddles features Fender mounting holes (17.5mm spacing), 19mm string spacing, top-loading, and is fully adjustable for string height and intonation.  The thicker back plate adds to the sustain and...

Endpin Jack - 1/4" Stereo Nickel

Stereo 3-conductor endpin style 1/4" jack, commonly used on acoustic and hollow body guitars.  Tightens from the outside for easier installation.  Sold individually.  Includes all nuts and washers required for proper installation. Jack...

Endpin Jack - 1/4" Stereo Chrome

Stereo 3-conductor endpin style 1/4" jack, commonly used on acoustic and hollow body guitars.  Tightens from the outside for easier installation.  Sold individually.  Includes all nuts and washers required for proper installation. Jack...

Endpin Jack - 1/4" Stereo Gold

Stereo 3-conductor endpin style 1/4" jack, commonly used on acoustic and hollow body guitars.  Tightens from the outside for easier installation.  Sold individually.  Includes all nuts and washers required for proper installation. Jack...