Bourns - Dual MN500K Split Shaft Blend Pot

Dual MN taper blend-balance with center detent. 6mm split shaft, 18 spline. 17 mm body diameter. ¼" watt, 300° rotation. ⅜" bushing.  ¾" shaft length FMS. M taper: 0% to 100% output voltage from 0% to 50% rotation (linear). 100%...

Bourns - Dual MN250K Split Shaft Blend Pot

Dual MN taper blend-balance with center detent. 6mm split shaft, 18 spline. 17 mm body diameter. ¼" watt, 300° rotation. ⅜" bushing.  ¾" shaft length FMS. M taper: 0% to 100% output voltage from 0% to 50% rotation (linear). 100%...

Socket Saver - 9 Pin Mini Tube Socket (straight lugs)

9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.

Power Cord - 18AWG IEC Cable (12 feet)

Three conductor, 12 foot detachable power cord with IEC female end SVT (Marshall type), 18 awg.

Power Cord - 18AWG IEC Cable (8 feet)

Three conductor, 8 foot detachable power cord with IEC female end SVT (Marshall type), 18 awg.

Unbleached Bone Nut - Blank Slant Cut

Unbleached "Vintage" bone nut blank 2-1/16" long x 3/8" tall with a 3/16"-1/4" slant cut. *Unbleached bone looks different every time with colours ranging from nearly white to creamy to almost "orangy" in tone.**Please note that if you order more than...

Schaller F-Series Locking Tuners (choose finish)

MADE IN GERMANY Not like the original - it's THE ORIGINAL!  Original look and specs with cutting-edge Schaller technology.  Exact replacement machine heads for Fender guitars with original dimensions in tried-and-tested Schaller quality. ...

Switchcraft #L11 - 1/4" Mono Jack (long bushing)

MADE IN USA Mono 2-Conductor 1/4" Jack with a long bushing (3/8"). Open Circuit.  Includes nut (3/8"-32 threading) and washer. Sold individually. Tech's notes: "These longer bushing jacks are commonly used on hollow body guitars."

Dunlop Super Pot - A250K Solid Shaft

Dunlop's Super Pot potentiometers are high-performance volume/tone pots that are made to last a lifetime.  Resistant to dust and corrosion, they provide a smooth audio-style taper that will never sound noisy or scratchy.  They've been tested at...

Eminence Beta-12A-2 - 250W 8ohm

Recommended for professional audio and bass guitar applications as a woofer in a vented enclosure. Also works well for PA in a sealed or bandpass enclosure. SPECIFICATIONS Nominal Diameter: 12", 305.0mm Nominal Impedance: 8 ohms Power: 250w rms, 500w...

Rubber Ring For EL34/5881 and 6L6GC Tuber Retainers

Rubber ring for retainer CE-S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"

Rubber Ring For KT88 and 6550 Tube Retainers

Rubber ring for retainer CE-S-H143 fits KT88 and 6550 tubes. Dampens vibration.

Tube Retainer - For EL84 Tubes

Tube retainer for EL84. for use with guitar amps and applications where the tube is suspended upside down in the chassis. Supports a maximum tube height of 2.8 inches

Tube Retainer - For KT88/6550 Tubes

For use with guitar amps and applications where KT88/6550 is suspended upside down in the chassis.

Belton Tube Retainer - For EL84s Tubes

Retainer (Belton). for use with EL84 tubes, mounts to chassis. Steel plate with nickel plating and natural coil spring. Note: These retainers are for specialized socket below-chassis mounting. (See mounting drawing below.) The springs are too short for...

Tube Retainer - For 12AX7 Tubes

Mounting Centers = 1", Overall Height = 2.2". Keeps common preamp tubes in place while dampening vibrations to reduce microphonics. Supports a maximum tube height of 2.1 inches

Tube Retainer - For EL34/5881 and 6L6GC Tubes

For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.

CTS - B10K Bias Trim Pot

Taper: B / LinearPercent @ Half Turn: 50%Resistance: 10KTolerance: +-20%Power Rated: 1/4WShaft Type: Recessed ScrewShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 1/4"Bushing Thread: 3/8 x 32Bushing Diameter: 3/8"Bushing...

Humbucker Pickup Ring - Curved/Slanted Tall - Cream

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 11mm - 10mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm *Matching Cream Parts?  See our blog post...

Humbucker Pickup Ring - Curved/Slanted Tall - Black

Plastic pickup rings for humbuckers.  Sold individually. Bottom: Curved Top: Slanted 11mm - 10mm Outside dimensions: 91.8mm x 46mm Inside dimensions: 70mm x 39.3mm Pickup screw spacing: 78mm