Cab Handle Screws - #10-32 x 1", Phillips, Oval, Stainless

Most commonly used on the following parts: Wide Strap Handles Mates with #10-32 Tee Nuts, sold separately. Thread: #10-32Length FMS: 1"Head: Countersunk/OvalDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT...

Cab Parts Screws - #8 x 3/4", Phillips, Oval, Stainless

Most commonly used on the following parts: Corner - 2-Leg Wraparound Nickel - Countersunk Recessed Black Plastic Pocket Handles Dogbone Style Handles Leather Style Handles Thread: #8Length FMS: 3/4"Head: Countersunk/OvalDrive: Phillips Sold...

Cab Parts Screws - #8 x 3/4", Phillips, Flat, Stainless

Most commonly used on the following parts: Corner - 2-Leg Wraparound Nickel - Countersunk Recessed Black Plastic Pocket Handles Dogbone Style Handles Leather Style Handles Thread: #8Length FMS: 3/4"Head: FlatDrive: Phillips Sold individually...

Cab Corner Screws - #6 x 3/4", Phillips, Flat, Stainless

Most commonly used to mount speaker cabinet corners: Corner - 2-Leg Wraparound Nickel - Countersunk Chevron Stacking Corner - Large Thread: #6Length FMS: 3/4"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring...

Cab Corner Screws - #6 x 3/4", Phillips, Oval, Stainless

Most commonly used to mount speaker cabinet corners: Corner - 2-Leg Wraparound Nickel - Countersunk Thread: #6Length FMS: 3/4"Head: Countersunk / OvalDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT...

Cab Feet Screws - #10 x 1.25", Robertson, Pan, Zinc

Most commonly used to mount speaker cabinet hardware: Straight Rubber Feet - Large Thread: #10Length FMS: 1 1/4"Head: PanDrive: Robertson Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire...

Cab Feet Screws - #10 x 1", Phillips, Pan, Zinc

Most commonly used to mount speaker cabinet hardware: Straight Rubber Feet - Small and Medium Tapered Rubber Feet - Medium, Large, and Tall Tubular Rubber Feet - Medium and Tall Thread: #10Length FMS: 1"Head: PanDrive: Phillips Sold individually...

Pole Socket Screws - #10 x 3/4", Phillips, Oval, Zinc

Most commonly used to mount speaker cabinet hardware: Pole Socket - Steel for 1 3/8" Thread: #10Length FMS: 3/4"Head: Countersunk/OvalDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout...

Cab Feet Screws - #8 x 3/4", Phillips, Pan, Zinc

Most commonly used to mount speaker cabinet hardware: Tapered Rubber Feet - Small Thread: #8Length FMS: 3/4"Head: PanDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar...

Hinge/Latch Screws - #6 x 3/4", Phillips, Pan, Zinc

Most commonly used to mount speaker cabinet hardware. Thread: #6Length FMS: 3/4"Head: PanDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry.  Don't just go by...

Switchcraft Switch Tip - Cream

MADE IN USA Switchcraft Switch Tip for Gibson Pickup Selectors, Ivory (aka: Cream) Replacement for Gibson: PRTK-010 *Matching Cream Parts?  See our blog post regarding the frustrating truth about cream parts!

IEC C14 Jack

Plastic IEC C14 connector for power entry. This power receptacle mounts with two screw holes which are counterunk for a clean look when using countersunk screws. This is a 3 prong connector for power cables with ground connections. Internal connections...

Nut - 7/16"-20, Red (for Cliff S2 Jacks)

Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.  Does NOT fit generic/import versions of Cliff Jacks. NOTE: These are REAL Cliff UK jacks.  There are counterfeits being sold on the market for much...

Tolex Glue - Brush-on (1 quart)

CAUTION!!!  This product may become damaged when shipping through sub-zero temperatures.  Order AT YOUR OWN RISK from November to April.  There are NO REFUNDS for ineffective product that was shipped during these months. For local...

Tolex Glue - Brush-on (1 gallon)

CAUTION!!!  This product may become damaged when shipping through sub-zero temperatures.  Order AT YOUR OWN RISK from November to April.  There are NO REFUNDS for ineffective product that was shipped during these months. For local...

Cab Corner/Plate Screws - #8 x 1/2", Phillips, Truss, Black

Most commonly used to mount speaker cabinet corners, large speaker jack plates, and handles with flat mounting screw surfaces.  These high quality screws are built stronger and more durable than imported versions. Thread: #8Length FMS: 1/2"Head:...

Bridge Mounting Screws - #5 x 1", Phillips, Flat, Nickel

Most commonly used for mounting flat/fixed bridges to solid body instruments. Thread: #5Length FMS: 1"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry...

Switch Mounting Screws - #6-32 x 1/2", Phillips, Oval, Stainless

Most commonly used for mounting CRL and Oak Grigsby Switches to pickguards and wood surfaces with countersunk screw holes.  Same thread/pitch as single coil pickups, like Strat and Tele pickups. Thread: #6-32Length FMS: 1/2"Head: Countersunk /...

Telecaster Pickup Cover - Tall Neck Black CLEARANCE

Plated pickup covers for telecaster neck pickups.  Base material is nickel/silver for minimal tonal impact. Sold individually. See alternate photo for dimensional drawing. Tech's Notes: "ALWAYS double check the dimensional drawings provided prior...

Telecaster Pickup Cover - Tall Neck Gold CLEARANCE

Plated pickup covers for telecaster neck pickups.  Base material is nickel/silver for minimal tonal impact. Sold individually. See alternate photo for dimensional drawing. Tech's Notes: "ALWAYS double check the dimensional drawings provided prior...