Bridge Mounting Screws - #5 x 1", Phillips, Flat, Nickel

Most commonly used for mounting flat/fixed bridges to solid body instruments. Thread: #5Length FMS: 1"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the entire guitar industry...

Switch Mounting Screws - #6-32 x 1/2", Phillips, Oval, Stainless

Most commonly used for mounting CRL and Oak Grigsby Switches to pickguards and wood surfaces with countersunk screw holes.  Same thread/pitch as single coil pickups, like Strat and Tele pickups. Thread: #6-32Length FMS: 1/2"Head: Countersunk /...

Telecaster Pickup Cover - Tall Neck Black CLEARANCE

Plated pickup covers for telecaster neck pickups.  Base material is nickel/silver for minimal tonal impact. Sold individually. See alternate photo for dimensional drawing. Tech's Notes: "ALWAYS double check the dimensional drawings provided prior...

Telecaster Pickup Cover - Tall Neck Gold CLEARANCE

Plated pickup covers for telecaster neck pickups.  Base material is nickel/silver for minimal tonal impact. Sold individually. See alternate photo for dimensional drawing. Tech's Notes: "ALWAYS double check the dimensional drawings provided prior...

Bass Tuners - Standard E Black CLEARANCE

Our modern styled standard tuners look good, are butter smooth, and hold their tune with the best of them.  These are great for a new build or as an upgrade on your imported guitars. Sold individually.  Available in both treble (right side of...

Standard Tuners - Bean Black

Our standard tuners are modeled after the classic Gotoh style body.  This version comes with bean buttons and a 14:1 gear ratio.  The perfect upgrade to the stock OEM tuners found on standard 6L headstocks and tight fitting 3+3 headstocks...

Locking Tuners - Bean Gold

Our locking standard tuners are modeled after the modern Schaller style body and locking wheel.  This version comes with bean buttons and a 19:1 gear ratio for fast and accurate tuning.  The perfect upgrade to the stock OEM tuners found on...

Locking Tuners - Bean Black

Our locking standard tuners are modeled after the modern Schaller style body and locking wheel.  This version comes with bean buttons and a 19:1 gear ratio for fast and accurate tuning.  The perfect upgrade to the stock OEM tuners found on...

Eminence KL3010LF - 450W 8ohm

10" High power subwoofer recommended for vented and horn loaded enclosures. SPECIFICATIONSNominal Diameter: 10", 254.0mmNominal Impedance: 8 ohmsPower: 450w rms, 900w programFreq. Response: 45.0 Hz-1.6 kHzSensitivity: 92.0 db 1w/1mMagnet Weight: 11.0...

Inlay Dots - 1/4" Red (pkg 50)

ABS plastic inlay dots.  1/4 inch (6.35 mm) diameter and 3mm thickness. Bag of 50 pieces.

Inlay Dots - 6mm White (pkg 50)

ABS plastic inlay dots.  6 mm diameter and 3mm thickness. Bag of 50 pieces.

Inlay Dots - 6mm Cream (pkg 50)

ABS plastic inlay dots.  6 mm diameter and 3mm thickness. Bag of 50 pieces. *Matching Cream Parts?  See our blog post regarding the frustrating truth about cream parts!

Inlay Dots - 6mm Black (pkg 50)

ABS plastic inlay dots.  6 mm diameter and 3mm thickness. Bag of 50 pieces.

Jack Plate - Square Plastic White

Flat square plastic jack plate.  Sold individually.  Includes mounting screws. Outer Dimensions: 33m x 33m x 2mmScrew Hole Spacing: 23mm on centerJack Hole Diameter: 10mm Tech's notes: "These are replacements for import guitars.  Double...

Endpin Jack - 1/4" Stereo Nickel

Stereo 3-conductor endpin style 1/4" jack, commonly used on acoustic and hollow body guitars.  Tightens from the outside for easier installation.  Sold individually.  Includes all nuts and washers required for proper installation. Jack...

Endpin Jack - 1/4" Stereo Chrome

Stereo 3-conductor endpin style 1/4" jack, commonly used on acoustic and hollow body guitars.  Tightens from the outside for easier installation.  Sold individually.  Includes all nuts and washers required for proper installation. Jack...

Endpin Jack - 1/4" Stereo Gold

Stereo 3-conductor endpin style 1/4" jack, commonly used on acoustic and hollow body guitars.  Tightens from the outside for easier installation.  Sold individually.  Includes all nuts and washers required for proper installation. Jack...

Barrel Jack - 1/4" Stereo Gold

Stereo 3-conductor barrel style 1/4" jack.  Alternative to Switchcraft #152B. Requires 1/2" hole. Sold individually.  Includes nut and rubber washer. Jack sleeve/cover available sold separately. Tech's notes: "This type of jack uses a...

Wiring Harness - For Combo Amp (choose plug)

Wiring harness for 1x12 combo.  Contains 18" long twisted pair of 18AWG vintage style cloth covered pushback wire with crimp terminals on one end and a plug of your choice on the other. Tech's notes: "Note that because this is true vintage style...

Switch - Rotary, 3 Poles, 3 Position

Rotary Switch, 3 Poles, 3 Positions (12 solder terminals), Make Before Break. 6.35mm (1/4") solid shaft. Bushing width: 11/32" Bushing height: 5/16" Bushing Thread: M9x0.75 Depth (FMS to bottom of solder lug): 3/4" Includes nut & washer 0.3A 125VAC