Generic - Pedal Power Daisy Chain (10 Connector)

Connect up to 10 pedals to one adapter with this pedal power daisy chain.  This chain has 1 in (2.1mm) and 10 right angle outs with 30cm of wire between plugs. Tech's Notes: "Make sure your adapter works with 2.1mm pins and that is can supply...

Hammond 1590B-BK - Standard Black Pedal Enclosure

Black Hammond 1590BBK - 4.43" x 2.38" x 1.22" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and...

Humbucker Mounting Ring Screws - #2x5/8”, Phillips, Oval, Nickel

Most commonly used as a mounting screw for short-medium humbucker rings on non-Gibson guitars. Thread: #2Length FMS: 5/8"Head: FlatDrive: Phillips Sold individually. Tech's notes: "Screw and spring sizes/types are NOT standardized throughout the...

Generic 1590LB - Mini Pedal Enclosure

Generic 1590LB (based on Hammond 1590LB) - 1.99" x 1.99" x 1.22" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection...

K-Style Tuners 6L - Bean Chrome (set) CLEARANCE

Our K-Style tuners take on that legendary look we all know and love.  This version comes with bean buttons and a 14:1 gear ratio.  The perfect upgrade to the stock OEM tuners found on 6-inline headstocks. Available in both treble and bass...

Eminence APT:30 - 10W 3.5kHz

The Eminence APT30 horn loaded tweeter offers exceptional high frequency reproduction at an exceptional value. Rated at 10 watts AES, this ultra-compact unit features a 2 oz. ferrite magnet, aluminum voice coil former, and mylar diaphragm. With an...

Switchcraft 3-way Pickup Selector - Right Angle

MADE IN USA Right-angle Switchcraft Pickup Selector, 3-Way.  Used on thinner body electrics, like SGs.  Includes 1x flat knurled nut.  Deep nut sold separately. Switch tip sold separately. As pictured, Switchcraft selector...

Reverb Tank - MOD 4BB3C1B

Replacement Reverb Tank for 4BB3C1B Solid, Sturdy Construction Long (16 ¾") 2 Spring Unit , Long Decay (2.75 - 4.0 seconds) Input Impedance 150 Ohms, Output Impedance 2250 Ohms Input Insulated/Output Grounded Horizontal,Open Side Down Mounting...

Straight Fret Wire - 057x110 Nickel/Silver (2ft Piece)

Jescar high quality fret wire.  See product pics for dimensions. Sold in 2ft straight length pieces.Qty 1 = 1 two foot long pieces of straight wireQty 5 = 5 two foot long pieces of straight wire

Eminence Kappa Pro 15A - 500W 8ohm

Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar. SPECIFICATIONS Nominal Diameter: 15", 381mm Nominal Impedance: 8 ohms Power: 500w rms, 1000w program Freq. Response: 46.0 Hz-4.0 kHz Sensitivity:...

Jack Plate - Top Angle Gold

Top Angle Jackplate, Gold. Includes screws. See alternate photo for dimensional drawing.

Jack Plate - Top Angle Black

Top Angle Jackplate, Black. Includes screws. See alternate photo for dimensional drawing.

Strat Knob Tone - 24-spline Black

Black Stratocaster Style Knob - Tone SPECIFICATIONSOverall Height: 13mmBase Diameter: 25mmIdeal Shaft Fit: Split ShaftFit Type: Push-on Fine (24 spline) Tech's notes: "These fit perfectly on CTS pots, and any other split shaft pots with a fine spline (24...

Hammond 290LEX - Power Transformer

MADE IN CANADA Replacement for Marshall JTM 45 Primary: 100/120/220/230/240VAC 50/60Hz Secondary: 690VCT @ 200mA6.3VCT @ 5A5V @ 3A Features: Designed for drop in replacement of original units, though mounting holes may not always match up...

Straight Fret Wire - 043x080 Nickel/Silver (2ft Piece)

Jescar high quality fret wire.  See product pics for dimensions. Sold in 2ft straight length pieces.Qty 1 = 1 two foot long pieces of straight wireQty 5 = 5 two foot long pieces of straight wire

Washer - Flat, For Pots & Jacks (3/8")

Flat washer for 3/8" pots and jacks.  Compatible with all parts using a 3/8" (USA) bushing.  See individual product descriptions to see if your pot or jack is compatible. Sold individually.  Bulk discounts available.

Mini Switch - Standard 3PDT On-Off-On

On-Off-On Mini Switch with solder lugs, 3PDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard 3PDT On-On

On-On Mini Switch with solder lugs, 3PDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard DPDT On-On-On

On-On-On (type 1) Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard DPDT On-Off-On

On-Off-On Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.