IC Socket - Precision Tooled 16 Pin

Precision tooled 16-pin IC socket for integrated circuits.  A must have for solder circuits with ICs in them as they avoid the need to solder directly to the IC, which is very susceptible to heat damage.  Solder one of these to the board, then...

IC - PT2399 Echo

The PT2399 echo/delay IC (integrated circuit) on a 16-pin DIP with a minimum of external components required. Delay time set by external resistance. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat...

IC - NE556N Timer

The NE556N dual bipolar timer IC (integrated circuit).  Used in some tremolo and other modulation effects. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you should use...

IC - NE555 Timer

The NE555 timer IC (integrated circuit).  Used in some tremolo and other modulation effects. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you should use these with sockets.

IC - TL022CP

The TL022CP dual op-amp (operational amplifier) IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you should use these with sockets.

IC - TL061

The TL061 op-amp (operational amplifier) JFET IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you should use these with sockets.

IC - TL072

The TL072 dual op-amp (operational amplifier) JFET IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you should use these with sockets.

IC - TL071

The TL071 op-amp (operational amplifier) JFET IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you should use these with sockets.

Transistor - BC108B

The BC108B small signal transistor. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BS170

The BS170 MOSFET. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC549

Another versatile NPN transistor called for in many circuits. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N5088

When in doubt, use a 2N5088 NPN transistor.  Widely regarded as the most versatile. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N5458

This is a classic JFET used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Diode - BAT41

The BAT41 is a Schottky Barrier diode in a DO35 type package.  Similar to 1N34A, but will sound slightly less compressed. SpecificationsPeak Reverse Voltage: 100 VForward Continuous Current: 0.1 AMax Surge Current: 0.75 AConfiguration:...

Diode - 1N4148

The 1N4148 is a diode in a DO35 type package.  Used for power protection, clipping, and more. SpecificationsCurrent, Ifs max: 500mAForward Current Average: 150mAForward Current Avg Rectified, IF(AV): 150mAForward Current Max, If:...

Diode - 1N4002

The 1N4002 is a standard recovery rectifier diode in a DO41 type package.  Used for power protection, clipping, and more.  Similar to 1N4001 but a higher Peak Reverse Voltage. SpecificationsStandard Recovery RectifierForward Current:...

Diode - 1N4001

The 1N4001 is a standard recovery rectifier diode in a DO41 type package.  Used for power protection, clipping, and more. SpecificationsStandard Recovery Power RectifierRepetitive Reverse Voltage Max, Vrrm: 50VForward Current Avg...

Diode - 1N914

The 1N914 is an ultra fast recovery rectifier diode in a DO35 type package.  A common clipping diode used in many compressors and overdrives. SpecificationsSpecificationsProduct Category: RectifiersProduct: Ultra Fast Recovery...

Diode - 1N60P

The 1N60P is a Schottky Barrier diode in a DO35 type package that provides efficient and excellent linearity.  A fantastic clipping diode used commonly in many distortion and overdrive circuits. SpecificationsNumber of Rectifiers:...

Standoff - #6-32, Female-Female, 3/4" (pkg 4)

Aluminum standoffs.  3/4" length.  Female-to-Female, #6-32 threading.