Diode - BAT41

The BAT41 is a Schottky Barrier diode in a DO35 type package.  Similar to 1N34A, but will sound slightly less compressed. SpecificationsPeak Reverse Voltage: 100 VForward Continuous Current: 0.1 AMax Surge Current: 0.75 AConfiguration:...

Diode - 1N4148

The 1N4148 is a diode in a DO35 type package.  Used for power protection, clipping, and more. SpecificationsCurrent, Ifs max: 500mAForward Current Average: 150mAForward Current Avg Rectified, IF(AV): 150mAForward Current Max, If:...

Diode - 1N4002

The 1N4002 is a standard recovery rectifier diode in a DO41 type package.  Used for power protection, clipping, and more.  Similar to 1N4001 but a higher Peak Reverse Voltage. SpecificationsStandard Recovery RectifierForward Current:...

Diode - 1N4001

The 1N4001 is a standard recovery rectifier diode in a DO41 type package.  Used for power protection, clipping, and more. SpecificationsStandard Recovery Power RectifierRepetitive Reverse Voltage Max, Vrrm: 50VForward Current Avg...

Diode - 1N914

The 1N914 is an ultra fast recovery rectifier diode in a DO35 type package.  A common clipping diode used in many compressors and overdrives. SpecificationsSpecificationsProduct Category: RectifiersProduct: Ultra Fast Recovery...

Diode - 1N60P

The 1N60P is a Schottky Barrier diode in a DO35 type package that provides efficient and excellent linearity.  A fantastic clipping diode used commonly in many distortion and overdrive circuits. SpecificationsNumber of Rectifiers:...

Standoff - #6-32, Female-Female, 3/4" (pkg 4)

Aluminum standoffs.  3/4" length.  Female-to-Female, #6-32 threading.

Standoff - #6-32, Female-Female, 1/2" (pkg 4)

Aluminum standoffs.  1/2" length.  Female-to-Female, #6-32 threading.

Standoff - #6-32, Male-Female, 3/4" (pkg 4)

Aluminum standoffs.  3/4" length.  Male-to-Female, #6-32 threading.

Standoff - #6-32, Male-Female, 1/2" (pkg 4)

Aluminum standoffs.  1/2" length.  Male-to-Female, #6-32 threading.

Fuse Holder - Marshall Style

Fuse Holder - High Quality Marshall Snap-In Style (Fits ⅝" to 11/16" Chassis Holes). Suitable for ¼" fuses. UL and CSA approved. Electrical Specifications: Rated current: 10A Rated voltage: 250V AC Contact resistance: 2MΩ @...

Fuse Holder - Generic 3AG Type

High quality spring loaded fuse holder used with 3AG type fuse.  Fits in a ½" diameter chassis hole.  Fuse must be present for cap to properly secure. Frame and cap material: phenolicTerminal material: Nickel-plated brass Mounted by nut

Felt Strap Washers - White (pair)

Felt washers for strap buttons.  13mm diameter. Sold as a pair.

Celestion VT-Junior - 50W 16ohm

Loaded into many popular branded practice combos, the VT Jr. is now available to buy for replacement and upgrades. Delivering the same balance and musicality as its big brother the V-Type, the 10-inch VT Jr. has been formulated using the same recipe of...

Celestion VT-Junior - 50W 8ohm

Loaded into many popular branded practice combos, the VT Jr. is now available to buy for replacement and upgrades. Delivering the same balance and musicality as its big brother the V-Type, the 10-inch VT Jr. has been formulated using the same recipe of...

Eminence GA10-SC59 - 20W 8ohm

Circa 1959 tone in a vintage American alnico magnet design approved by George Alessandro. Tight, punchy, percussive lows and top end chime with sparkle. A nice bright musical Tweed tone. SPECIFICATIONS Nominal Diameter: 10.0", 254 mm Nominal...

Power Cord - 16AWG Bare End 3 Conductor (12 feet)

Power Cord - (3 conductor) Bare End, 12 feet, 16 AWG.  Cable is 11/32" diameter.

Power Cord - 16AWG Bare End 3 Conductor (8 feet)

Power Cord - (3 conductor) Bare End, 8 feet, 16 AWG.  Cable is 11/32" diameter.

Schaller Style Strap Locks - Chrome (pair)

Economy Schaller Style Strap Locks, Chrome. Includes strap button, locking mechanism, and mounting hardware. Sold as a pair.

Schaller Style Strap Locks - Gold (pair)

Economy Schaller Style Strap Locks, Gold. Includes strap button, locking mechanism, and mounting hardware. Sold as a pair.