Jack Plate - Top Angle Black

Top Angle Jackplate, Black. Includes screws. See alternate photo for dimensional drawing.

Strat Knob Tone - 24-spline Black

Black Stratocaster Style Knob - Tone SPECIFICATIONSOverall Height: 13mmBase Diameter: 25mmIdeal Shaft Fit: Split ShaftFit Type: Push-on Fine (24 spline) Tech's notes: "These fit perfectly on CTS pots, and any other split shaft pots with a fine spline (24...

Hammond 290LEX - Power Transformer

MADE IN CANADA Replacement for Marshall JTM 45 Primary: 100/120/220/230/240VAC 50/60Hz Secondary: 690VCT @ 200mA6.3VCT @ 5A5V @ 3A Features: Designed for drop in replacement of original units, though mounting holes may not always match up...

Straight Fret Wire - 043x080 Nickel/Silver (2ft Piece)

Jescar high quality fret wire.  See product pics for dimensions. Sold in 2ft straight length pieces.Qty 1 = 1 two foot long pieces of straight wireQty 5 = 5 two foot long pieces of straight wire

Washer - Flat, For Pots & Jacks (3/8")

Flat washer for 3/8" pots and jacks.  Compatible with all parts using a 3/8" (USA) bushing.  See individual product descriptions to see if your pot or jack is compatible. Sold individually.  Bulk discounts available.

Mini Switch - Standard 3PDT On-Off-On

On-Off-On Mini Switch with solder lugs, 3PDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard 3PDT On-On

On-On Mini Switch with solder lugs, 3PDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard DPDT On-On-On

On-On-On (type 1) Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard DPDT On-Off-On

On-Off-On Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard DPDT On-On

On-On Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard SPDT On-Off-On

On-Off-On Mini Switch with solder lugs, SPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard SPDT On-On

On-On Mini Switch with solder lugs, SPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Mini Switch - Standard SPST On-Off

On-Off Mini Switch with solder lugs, SPST, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if you can.

Generic 1590G - Small+ Pedal Enclosure

Generic 1590G (based on Hammond 1590G) - 3.94" x 1.97" x 1" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access...

Generic 1590BB - Medium Pedal Enclosure

Generic 1590BB (based on Hammond 1590BB) - 4.67" x 3.68" x 1.34" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access...

Generic 1590B - Standard Pedal Enclosure

Generic 1590B (based on Hammond 1590B) - 4.43" x 2.38" x 1.22" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against...

Generic 1590A - Small Pedal Enclosure

Generic 1590A (based on Hammond 1590A) - 3.64" x 1.52" x 1.22" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of...

Generic #12B - 1/4" Stereo Jack

Stereo 3-Conductor 1/4" Jack. Open Circuit. Includes nut (3/8"-32 threading) and washer. Sold individually.

Next Gen - Pro Speaker Cable Mono (choose length & ends)

MADE IN CANADA Professional quality hand-soldered speaker cable for amps and PA systems.  Top tour-grade quality parts and workmanship. Features Lifetime warranty Double strain relief system, built to last Your choice of cable ends (straight...

Next Gen - Pro Instrument Cable Mono (choose length & ends)

MADE IN CANADA Professional quality hand-soldered instrument cable for guitar, bass, or any other electric instrument with a 1/4" mono jack.  Top tour-grade quality parts and workmanship.  Much better quality than your standard off-the-shelf...