Generic

Terminal Strip - 3 Lug, 2nd Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Terminal Strip - 5 Lug, 3rd Lug Common, Horizontal (pkg 5)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on ⅜" centers. Sold as a pack of 5. See alternate photo for dimensional drawing.

Ceramic - 8 Pin Octal Tube Socket (solder)

Ceramic Tube socket used for octal power tubes. Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”) Mounting Centers: 1-1/2”...

Ceramic - 9 Pin Mini Tube Socket (solder)

Ceramic tube socket commonly used for preamp tubes or EL84 power tubes. Chassis hole: 7/8” Mounting Centers: 1-1/8” Bottom or top mount See alternate photo for dimensional drawing.

Staking Tool - For Eyelets and Turrets

Turret staking tool. Directions: Drill ⅛" hole Insert eyelet Flip board over on to a hard service Center staking tool over the eyelet Strike staking tool with hammer to clamp eyelet to board See...

Vulcanized Fiberboard - 3" x 15" x 0.062"

Vulcanized Fiberboard, used for laying out circuits using eyelets.  NOT pre-drilled. Size: 3" x 15" x 0.062"

Turret Board - Pre-drilled 300mm x 60mm x 2mm

Blank board 300mm x 60mm, 2mm thick Glass epoxy unclad laminate.

Fender Style Amp Knob - Thick Number

Fender style knob.  Sold individually. SPECIFICATIONSOverall Height: 5/8"Base Diameter: 1 3/16"Ideal Shaft Fit: Solid Shaft (6.35mm)Fit Type: Set Screw Tech's notes: "Knobs sized for solid shaft...

Capacitor Clamp - 1 3/8" Diameter

For mounting multi-section can capacitors in your vintage amp. 1 3/8" inner diameter.

Aluminum Knob - Large (Choose Colour)

Push-on style aluminum knobs (plastic with aluminum surface layer).  Available in multiple colours.  Sold individually. SPECIFICATIONSOverall Height: 17mmBase Diameter: 17mmIdeal Shaft...

Aluminum Knob - Small (Choose Colour)

Push-on style aluminum knobs (plastic with aluminum surface layer).  Sold individually. SPECIFICATIONSOverall Height: 17mmBase Diameter: 13mmIdeal Shaft Fit: 6mm Split ShaftFit Type: Push-on...

Davies Style 1510 Knob - Choose Colour

Davies style 1510 knobs.  Screw mounts through a metal plate for added durability.  Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 5/8"Base...

DC Jack - Mini (2.1mm)

Mini 2.1mm DC jack, commonly used on effects pedals. Tech's notes: "Perfect for use in tight enclosures where there's no room for a battery as there is no switching option."

DC Jack - Black (2.1mm)

Standard 2.1mm DC switching jack, commonly used on effects pedals. Tech's notes: "The switching portion allows you to wire to the battery.  Then the circuit to the battery will open whenever...

Prototyping Stripboard - For Pedals (94mm x 53mm)

Pre-drilled, cleaned, and easy to score & snap. 94mm x 53mm

1/4W MINI Carbon Film Resistors (pkg 5)

Power: 1/4W Tolerance: +-5%Type: Carbon FilmLead Style: ThinRoHS Compliant Sold in packs of 5. See options to choose resistance. Buy in bulk, mixing and matching resistance to save $$$$.

1/2W Metal Film Resistors (Pkg 5)

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Sold in multiples of 5. 1/2 watt ± 1%...

Chicken Head Knob - Choose Colour

Chicken head knobs with a brass bushing.  Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 9/16"Base Diameter: 1 1/4" (tip to end)Ideal Shaft Fit: Solid...

Boss Style Knob - Small (Choose Colour)

Small Boss/MXR style knobs with brass bushing.  Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 1/2"Base Diameter: 3/4"Ideal Shaft Fit: Solid Shaft (6...

Adhesive Rubber Feet - Small (pkg 4)

Small adhesive rubber feet, for pedals. 1cm W x 0.35cm H Sold as a sheet of 4.