Generic

Fuse Holder - Generic 3AG Type

High quality fuse holder used with 3AG type fuse. Fits in a ½" diameter chassis hole. Frame and cap material: phenolic. Terminal material: Nickel-plated brass Mounted by nut.

Power Cord - 16AWG Bare End 3 Conductor (12 feet)

Power Cord - (3 conductor) Bare End, 12 feet, 16 AWG

Power Cord - 16AWG Bare End 3 Conductor (8 feet)

Power Cord - (3 conductor) Bare End, 8 feet, 16 AWG

Generic #12A - 1/4" Mono Jack (with tip shunt)

Mono 2-Conductor 1/4" Jack with Tip Shunt.  Open circuit.  Includes nut (3/8"-32 threading) and washer. Sold individually.

Footswitch Topper - Aluminum (choose colour)

Anodized aluminum footswitch toppers.  Available in a variety of colours.  Sold individually. These are great for colour coding your pedals as well as making your switches much easier to...

5mm LED Bezel - Black Plastic

Lightweight Black Plastic ConstructionSnap-in Mounting StyleSuitable for 5mm and T1 3/4 LEDsMounting Hole: 8mm

5mm LED Bezel - Chrome

Chrome MetalSolid ConstructionSupplied Complete with Mounting Nut, Washer, and LED holderSuitable for 5mm and T1 3/4 LEDsMounting Hole: 7.7mm

Vintage Style Knob - Choose Colour

Generic vintage style knobs.  Replacements for Fender part number 099-0933-000. Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 1/2"Base Diameter:...

Solder Lug - #8 Hole, Locking (pkg 10)

Locking terminal lugs, #8 ⅝" length, angled. Package of 10.

9V Battery Terminals - Straight

9-volt battery terminals mounted on rigid plastic.  Wires are 15cm long and come out of one side of the terminal. Sold individually.

9V Battery Terminals - Angled

9-volt battery terminals mounted on rigid plastic.  Wires are 15cm long and come out of the center of the terminal. Sold individually.

Generic - Pedal Power Daisy Chain (5 Connector)

Connect up to 5 pedals to one adapter with this pedal power daisy chain.  This chain has 1 in (2.1mm) and 5 right angle outs with 30cm of wire between plugs. Tech's Notes: "Make sure your...

Generic - Pedal Power Daisy Chain (10 Connector)

Connect up to 10 pedals to one adapter with this pedal power daisy chain.  This chain has 1 in (2.1mm) and 10 right angle outs with 30cm of wire between plugs. Tech's Notes: "Make sure your...

Generic 1590LB - Mini Pedal Enclosure

Generic 1590LB (based on Hammond 1590LB) - 1.99" x 1.99" x 1.22" (exterior dimensions) Rugged, Diecast Enclosure aluminum alloy (tough yet easy to machine), electronic instrument...

Washer - Flat, For Pots & Jacks (3/8")

Flat washer for 3/8" pots and jacks.  Compatible with all parts using a 3/8" (USA) bushing.  See individual product descriptions to see if your pot or jack is compatible. Sold individually...

Mini Switch - Standard 3PDT On-Off-On

On-Off-On Mini Switch with solder lugs, 3PDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a...

Mini Switch - Standard 3PDT On-On

On-On Mini Switch with solder lugs, 3PDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat sink if...

Mini Switch - Standard DPDT On-On-On

On-On-On (type 1) Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and...

Mini Switch - Standard DPDT On-Off-On

On-Off-On Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a...

Mini Switch - Standard DPDT On-On

On-On Mini Switch with solder lugs, DPDT, with Mounting hardware. *Please Note: These small switches cannot take very much heat.  Do be careful soldering to the terminals and use a heat...