Generic

5mm LED (Choose Colour)

5mm round LEDs. Forward voltage (V): Blue = 3.0-3.2 Green = 2.3-2.5 Red = 1.9-2.1 Yellow = 2.0-2.3

3mm LED (Choose Colour)

3mm round LEDs. Forward voltage (V): Blue = 2.0-3.2 Green = 2.3-2.5 Red = 2.0-2.2 Yellow = 2.0-2.3

IC - L78L05 Voltage Regulator 5V

The L78L05 fixed 5V regulator in a TO-92 case.  Max current 100mA. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you...

IC - LM7805 L7805 Voltage Regulator 5V

The LM7805 fixed 5V regulator in a TO-220 case.  Max current 1.5A. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you...

IC Socket - Precision Tooled 8-Pin

Precision tooled 8-Pin IC socket for integrated circuits.  A must have for solder circuits with ICs in them as they avoid the need to solder directly to the IC, which is very susceptible to...

IC Socket - Precision Tooled 16 Pin

Precision tooled 16-pin IC socket for integrated circuits.  A must have for solder circuits with ICs in them as they avoid the need to solder directly to the IC, which is very susceptible to...

IC - PT2399 Echo

The PT2399 echo/delay IC (integrated circuit) on a 16-pin DIP with a minimum of external components required. Delay time set by external resistance. PLEASE NOTE: Easily susceptible to heat damage...

IC - NE556N Timer

The NE556N dual bipolar timer IC (integrated circuit).  Used in some tremolo and other modulation effects. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly,...

IC - NE555 Timer

The NE555 timer IC (integrated circuit).  Used in some tremolo and other modulation effects. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat...

IC - TL022CP

The TL022CP dual op-amp (operational amplifier) IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you...

IC - TL061

The TL061 op-amp (operational amplifier) JFET IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you...

IC - TL072

The TL072 dual op-amp (operational amplifier) JFET IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally,...

IC - TL071

The TL071 op-amp (operational amplifier) JFET IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you...

Transistor - BC108

The BC108 small signal transistor. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BS170

The BS170 MOSFET. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC549

Another versatile NPN transistor called for in many circuits. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N5088

When in doubt, use a 2N5088 NPN transistor.  Widely regarded as the most versatile. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat...

Transistor - 2N5458

This is a classic JFET used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Diode - BAT41

The BAT41 is a Schottky Barrier diode in a DO35 type package.  Similar to 1N34A, but will sound slightly less compressed. SpecificationsPeak Reverse Voltage: 100 VForward Continuous...

Diode - 1N4148

The 1N4148 is a diode in a DO35 type package.  Used for power protection, clipping, and more. SpecificationsCurrent, Ifs max: 500mAForward Current Average: 150mAForward Current Avg...