Generic

N-Style NP3C - 1/4" Stereo Straight Plug - Black

Designed after the classic N-style 1/4" stereo NP3C 3 conductor plug.  This aftermarket version includes all the benefits of the advanced chuck/strain-relief at a fraction of the cost.

N-Style NP3C - 1/4" Stereo Straight Plug

Designed after the classic N-style 1/4" stereo NP3C 3 conductor plug.  This aftermarket version includes all the benefits of the advanced chuck/strain-relief at a fraction of the cost.

IC - NE5532

The NE5532 low noise dual op-amp (operational amplifier) JFET IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink...

IC - NJM4558

The NJM4558D (aka: JRC4558D) dual op-amp (operational amplifier) JFET IC (integrated circuit).  Identical tone to the classic 4558 found in TS circuits. PLEASE NOTE: Easily susceptible to heat...

IC - TL062

The TL062 dual op-amp (operational amplifier) low power JFET IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink. ...

IC - TL074

The TL074 quad op-amp (operational amplifier) JFET IC (integrated circuit). PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally,...

3mm LED Bezel - Black Plastic

Lightweight Black Plastic ConstructionSnap-in Mounting StyleSuitable for 3mm and T1 3/4 LEDsMounting Hole: 6mm (15/64")

3mm LED Bezel - Chrome

Chrome MetalSolid ConstructionSupplied Complete with Mounting Nut and LED holderSuitable for 3mm and T1 3/4 LEDsMounting Hole: 5.7mm (7/32")

Mini Rocker Switch - SPST Black

Most commonly used on pedalboards and amps, these SPST on/off rocker switches provide an easy way to control power. Current rating: 10A @ 125 VAC, 5A @ 250 VACShaft diameter: 20 mm...

Mini Rocker Switch - SPST Red Illuminated

Most commonly used on pedalboards and amps, these SPST on/off rocker switches with a an illuminated face plate provide an easy way to control power with a visible reference. Current rating: 10A @...

Capacitor - Ceramic Disc 50V (choose value)

Stable, Low Cost Ceramic CapacitorAccuracy: ±20%Wide Operating Temperature Range - +10oC to +85oCDielectric Withstand - 2.5x Rated VoltageBody Diameter - 4mmPin Spacing - 3mm Buy in bulk,...

5mm LED (Choose Colour)

5mm round LEDs. Forward voltage (V): Blue = 3.0-3.2 Green = 2.3-2.5 Red = 1.9-2.1 Yellow = 2.0-2.3

3mm LED (Choose Colour)

3mm round LEDs. Forward voltage (V): Blue = 2.0-3.2 Green = 2.3-2.5 Red = 2.0-2.2 Yellow = 2.0-2.3

IC - L78L05 Voltage Regulator 5V

The L78L05 fixed 5V regulator in a TO-92 case.  Max current 100mA. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you...

IC - LM7805 L7805 Voltage Regulator 5V

The LM7805 fixed 5V regulator in a TO-220 case.  Max current 1.5A. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally, you...

IC Socket - Precision Tooled 8-Pin

Precision tooled 8-Pin IC socket for integrated circuits.  A must have for solder circuits with ICs in them as they avoid the need to solder directly to the IC, which is very susceptible to...

IC Socket - Precision Tooled 16 Pin

Precision tooled 16-pin IC socket for integrated circuits.  A must have for solder circuits with ICs in them as they avoid the need to solder directly to the IC, which is very susceptible to...

IC - PT2399 Echo

The PT2399 echo/delay IC (integrated circuit) on a 16-pin DIP with a minimum of external components required. Delay time set by external resistance. PLEASE NOTE: Easily susceptible to heat damage...

IC - NE556N Timer

The NE556N dual bipolar timer IC (integrated circuit).  Used in some tremolo and other modulation effects. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly,...

IC - NE555 Timer

The NE555 timer IC (integrated circuit).  Used in some tremolo and other modulation effects. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat...