Generic

Turret Strip - U-Style, 36 Lugs, Two Rows

Two rows of 18 U-style terminals (36 total) on a black board. This U-style terminal strip is extra dense with 6.35mm terminal spacing allowing for even more densely populated point-to-point builds...

IEC C14 Jack

Plastic IEC C14 connector for power entry. This power receptacle mounts with two screw holes which are counterunk for a clean look when using countersunk screws. This is a 3 prong connector for power...

Generic - 1/4" Stereo Switching Jack (6 lug; straight PCB)

Stereo 3-Conductor 1/4" Jack with tip, ring, and sleeve shunts.  Straight PCB lugs. Closed Circuit. Sold individually.  Includes nut and washer.

Capacitor - Silver Mica, Radial 500V (choose value)

± 5% tolerance radial lead capacitor, dipped in epoxy coating. ROHS compliant.

Anodized Aluminum Knob - Small (Choose Colour)

Anodized aluminum knobs - small.  Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 16mmBase Diameter: 13mmIdeal Shaft Fit: Solid Shaft (6.35mm)Fit Type:...

3-way Toggle Switch - Gold /w Gold Metal Tip

Short straight 3-way toggle switch, Gold base, Gold metal knob. 5/16" tall thread. Requires 1/2" hole and 15/16" cavity depth.

3-way Toggle Switch - Nickel /w Chrome Metal Tip

Short straight 3-way toggle switch, Nickel base, Chrome metal knob. 5/16" tall thread. Requires 1/2" hole and 15/16" cavity depth.

Grommet - Rubber, for chassis holes - Choose Size (pkg 5)

Listed diameter is inside diameter. Sold in packs of 5. 1/8" diameter designed for chassis hole with diameter 1/4" 3/16" diameter designed for chassis hole with diameter 5/16" 1/4" diameter...

Generic - DC2.1mm Cable 27" (female-to-female)

27" long female-to-female DC 2.1mm cable.  Useful for creating your own pedal power banks or for connecting your pedals to your power banks.

Footswitch - 3PDT On-(On) Momentary (solder)

Material: Nickel Plated Brass Switch: Standard Click Function: 3PDT ON-(ON) Momentary Terminals: 9-pin Solder Bushing Diameter: 7/16" Bushing...

Fluted Silver Cap Knob - Small (Choose Colour)

Small fluted knob with silver cap and brass bushing.  Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 7/16"Base Diameter: 5/8"Ideal Shaft Fit: Solid...

Strain Relief - for 35/64" x 5/8" Hole, 11/32" Cord Diameter

For 35/64" x 5/8" chassis hole, 11/32" cord diameter.  Fits most Fender® amps. Protects the lifeline of your electric/ electronic products by absorbing the forces of pull, push, and twist...

Shielded RCA Cable - Stereo Right Angle (3 feet)

Shielded right angle RCA cables for Reverb Tanks and other electronic devices.

Reverb Tank Bag - 9" Long, Black Tolex

Reverb tank bags give the reverb tank better isolation which results is fuller, richer reverb. 9" long, for short reverb tanks (8AB*, 9EB*, etc.) *Note: Does NOT include reverb tank.

Capacitor - Polypropylene, Radial 630V (choose value)

Polypropylene film capacitor. Tolerance: ±10% Radial leads Voltage rating: 630VDC

IC - TC1044SCPA Voltage Regulator

Charge pump IC by Microchip Technologies. Get a higher voltage or negative voltage from a battery supply. Up to 12 V in and 12 V output. PLEASE NOTE: Easily susceptible to heat damage.  If you...

Socket Saver - 9 Pin Mini Tube Socket (straight lugs)

9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver...

Power Cord - 18AWG IEC Cable (12 feet)

Three conductor, 12 foot detachable power cord with IEC female end SVT (Marshall type), 18 awg.

Power Cord - 18AWG IEC Cable (8 feet)

Three conductor, 8 foot detachable power cord with IEC female end SVT (Marshall type), 18 awg.

Rubber Ring For EL34/5881 and 6L6GC Tuber Retainers

Rubber ring for retainer CE-S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"