Generic

3-way Toggle Switch - Nickel /w Chrome Metal Tip

Short straight 3-way toggle switch, Nickel base, Chrome metal knob. 5/16" tall thread. Requires 1/2" hole and 15/16" cavity depth.

Grommet - Rubber, for chassis holes - Choose Size (pkg 5)

Listed diameter is inside diameter. Sold in packs of 5. 1/8" diameter designed for chassis hole with diameter 1/4" 3/16" diameter designed for chassis hole with diameter 5/16" 1/4" diameter...

Generic - DC2.1mm Cable 27" (female-to-female)

27" long female-to-female DC 2.1mm cable.  Useful for creating your own pedal power banks or for connecting your pedals to your power banks.

Footswitch - 3PDT On-(On) Momentary (solder)

Material: Nickel Plated Brass Switch: Standard Click Function: 3PDT ON-(ON) Momentary Terminals: 9-pin Solder Bushing Diameter: 7/16" Bushing...

Fluted Silver Cap Knob - Small (Choose Colour)

Small fluted knob with silver cap and brass bushing.  Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 7/16"Base Diameter: 5/8"Ideal Shaft Fit: Solid...

Strain Relief - for 35/64" x 5/8" Hole, 11/32" Cord Diameter

For 35/64" x 5/8" chassis hole, 11/32" cord diameter.  Fits most Fender® amps. Protects the lifeline of your electric/ electronic products by absorbing the forces of pull, push, and twist...

Shielded RCA Cable - Stereo Right Angle (3 feet)

Shielded right angle RCA cables for Reverb Tanks and other electronic devices.

Reverb Tank Bag - 9" Long, Black Tolex

Reverb tank bags give the reverb tank better isolation which results is fuller, richer reverb. 9" long, for short reverb tanks (8AB*, 9EB*, etc.) *Note: Does NOT include reverb tank.

Capacitor - Polypropylene, Radial 630V (choose value)

Polypropylene film capacitor. Tolerance: ±10% Radial leads Voltage rating: 630VDC

IC - TC1044SCPA Voltage Regulator

Charge pump IC by Microchip Technologies. Get a higher voltage or negative voltage from a battery supply. Up to 12 V in and 12 V output. PLEASE NOTE: Easily susceptible to heat damage.  If you...

Socket Saver - 9 Pin Mini Tube Socket (straight lugs)

9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver...

Power Cord - 18AWG IEC Cable (12 feet)

Three conductor, 12 foot detachable power cord with IEC female end SVT (Marshall type), 18 awg.

Power Cord - 18AWG IEC Cable (8 feet)

Three conductor, 8 foot detachable power cord with IEC female end SVT (Marshall type), 18 awg.

Rubber Ring For EL34/5881 and 6L6GC Tuber Retainers

Rubber ring for retainer CE-S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"

Rubber Ring For KT88 and 6550 Tube Retainers

Rubber ring for retainer CE-S-H143 fits KT88 and 6550 tubes. Dampens vibration.

Tube Retainer - For EL84 Tubes

Tube retainer for EL84. for use with guitar amps and applications where the tube is suspended upside down in the chassis. Supports a maximum tube height of 2.8 inches

Tube Retainer - For KT88/6550 Tubes

For use with guitar amps and applications where KT88/6550 is suspended upside down in the chassis.

Tube Retainer - For 12AX7 Tubes

Mounting Centers = 1", Overall Height = 2.2". Keeps common preamp tubes in place while dampening vibrations to reduce microphonics. Supports a maximum tube height of 2.1 inches

Tube Retainer - For EL34/5881 and 6L6GC Tubes

For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.

Footswitch - SPST Soft On-(Off) NC Momentary (solder)

Material: Nickel Plated Brass Switch: Soft (no click) Function: SPST ON-(OFF) Momentary"Normally Closed" Terminals: 2-pin Solder Bushing Diameter: 7/16" Bushing...