Generic

Turret Board - Pre-loaded (60 Turrets) 300mm x 60mm x 2mm

300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets.  Save yourself some time loading the board and move on to building your project!  Made of a glass/expoxy unclad...

Vintage Style Handle - Premium Brown

High quality replacement handle for vintage Fender amps.  Thicker and heavier duty than the typical flat handles.  Will work on many other amps as well.  Mounting holes are 6.5"...

Vintage Style Handle - Premium Black

High quality replacement handle for vintage Fender amps.  Thicker and heavier duty than the typical flat handles.  Will work on many other amps as well.  Mounting holes are 6.5"...

Reverb Tank Bag - 17" Long, Black Tolex

Reverb tank bags give the reverb tank better isolation which results is fuller, richer reverb. 17" long, for long reverb tanks (4AB*, 4EB*, etc.) *NOTE: Does NOT included reverb tank.

Speaker Mounting Studs (pkg 4)

High-quality machine screws with #12 reverse wood screw threading at the head.  Similar to Fender part number: 099-2094-000  These screws are a simple solution for mounting speakers to...

Push-button Switch - SPST Off-(On) Red Momentary "Killswitch"

Soft-touch push button momentary switch.  Can be used for several applications, but most commonly used as a momentary killswitch in guitars. Switch: Soft Touch (no...

Push-button Switch - SPST Off-(On) Black Momentary "Killswitch"

Soft-touch push button momentary switch.  Can be used for several applications, but most commonly used as a momentary killswitch in guitars. Switch: Soft (no click) Function: SPST...

DC Jack - Metal (2.1mm)

Metal 2.1mm DC switching jack, commonly used on effects pedals. Ideally used with center-positive applications.  Some applications will require insulating the bushing from the chassis, so that...

DC Jack - Red (2.1mm)

Standard 2.1mm DC switching jack, commonly used on effects pedals. Tech's notes: "The switching portion allows you to wire to the battery.  Then the circuit to the battery will open whenever...

DC Jack - White (2.1mm)

Standard 2.1mm DC switching jack, commonly used on effects pedals. Tech's notes: "The switching portion allows you to wire to the battery.  Then the circuit to the battery will open whenever...

Davies Style 1400 Knob - Choose Colour

Davies style 1400 knobs.  Screw mounts through a metal plate for added durability.  Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 11mmBase...

Anodized Aluminum Knob - Choose Colour

Anodized aluminum knobs.  Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 14mmBase Diameter: 20mmIdeal Shaft Fit: Solid Shaft (6.35mm)Fit Type: *Set...

Flying Saucer Skirt Knob - Choose Size

Flying saucer skirt knobs with delta arrow indicator.  Bass bushing for added quality and durability.  Multiple sizes available: SPECIFICATIONS Size Dimensions (D x...

Trimpots - 6mm

Taper: B / LinearPercent @ Half Turn: 50%Resistance: choose from listTolerance: +-20%Power Rated: 1/8W

Capacitor - Radial Electrolytic 25V-50V (choose value)

Voltage-Rated: choose from optionsTolerance: ±20%Max Temperature Range: +105°C Buy in bulk, mixing and matching resistance to save $$$$.

IC - LM386 0.32W Audio Power Amp

The LM386 low voltage power amplifier.  Max output of 325mW @ 8 ohms. PLEASE NOTE: Easily susceptible to heat damage.  If you must solder directly, always use a heat sink.  Ideally,...

Transistor - 2N7000

This is a classic MOSFET used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA13

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

1/4W Metal Film Resistors (pkg 5)

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. 1/4 watt ± 1% tolerance Epoxy...

5mm LED - Tri-colour Red/Green/Blue (Common Cathode)

5mm tri-colour Red/Green/Blue LED with a common cathode in a water clear lens. Forward voltage (V): Red = 2.0-2.35 Blue = 3.0-3.5 Green = 3.0-3.5