CTS - A500K/A500K Stacked Concentric Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 20% (CTS = BD-taper)Resistance: 500K eachTolerance: +-20%Power Rated: 1/4W eachShaft Type: Bottom = 17/64" (6.75mm) | Top = 3/16" (4.75mm) Solid ShaftShaft Length FMS (from mounting surface):...

CTS - A250K/A500K Stacked Concentric Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 20% (CTS = BD-taper)Resistance: 500K | 250K (Bottom Shaft | Top Shaft)Tolerance: +-20%Power Rated: 1/4W eachShaft Type: Bottom = 17/64" (6.75mm) | Top = 3/16" (4.75mm) Solid ShaftShaft Length FMS (from...

Alpha Push-Pull - A500K Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 500KTolerance: +-20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: Import / Coarse / 18 splineShaft Length FMS (from mounting surface): 19mmBushing Thread: 3/8" x 32Bushing...

Alpha Push-Pull - A250K Split Shaft Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: +-20%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: Import / Coarse / 18 splineShaft Length FMS (from mounting surface): 19mmBushing Thread: 3/8" x 32Bushing...

Switchcraft #152B - 1/4" Stereo Barrel Jack

MADE IN USA Stereo 3-Conductor 1/4" Jack. Requires 1/2" hole. Includes nut and washer. Tech's notes: "This type of jack uses a larger bushing and is meant to be mounted directly into wood.  It is too large to fit any standard jack plates/panels."

Wah Pot - 100K

Taper: ICAR (custom audio taper used on wah pots)Resistance: 100KTolerance: 20%Power Rated: 1/4WShaft Type: Geared for Wah pedals (16mm long)Shaft Length FMS (from mounting surface): 35mm (1 3/8")Bushing Thread: M9x0.75Bushing Diameter: 9mmBushing...

CTS - A500K No-Load Tone Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 500KTolerance: +-10%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 5/8"Bushing Thread: 3/8 x 32Bushing Diameter:...

CTS - A250K No-Load Tone Pot

Taper: A / Audio / LogarithmicPercent @ Half Turn: 10%Resistance: 250KTolerance: +-10%Power Rated: 1/4WShaft Type: 6mm Split ShaftShaft Knurl: USA / Fine / 24 splineShaft Length FMS (from mounting surface): 3/4"Bushing Thread: 3/8 x 32Bushing Diameter:...

Gotoh BB-04W - 18V Battery Box (screw-in)

MADE IN JAPAN Screw-mounted 18V battery box with access door and built-in lead wires. Includes mounting screws. See alternate photo for dimensional drawing.

Gotoh BB-04 - 9V Battery Box (screw-in)

MADE IN JAPAN Screw-mounted 9V battery box with access door and built-in lead wires. Includes mounting screws. See alternate photo for dimensional drawing.

Eminence DeltaLite II 2512 - 250W 8ohm

Recommended for professional audio as a mid/hi or full-range and monitor; also for bass guitar. Works well in sealed or vented enclosures. SPECIFICATIONS Nominal Diameter: 12", 304.8mm Nominal Impedance: 8 ohms Power: 250w rms, 500w program Freq...

Hammond 291CX - Power Transformer UPGRADE

MADE IN CANADA UPGRADE For Fender (Vibrolux, AB763) (Vibrolux Reverb, AA270, AA964, AB568) (Tremolux, AA763, AB763) Upgrade to Fender part number 125P26A & 022723 Primary: 120VAC 60Hz Secondary: 650VCT @ 207mA50V Tap6.3VCT @ 4A5V @ 3A ...

Eminence Kappa-15LFA - 600W 8ohm

Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar. SPECIFICATIONS Nominal Diameter: 15", 381mm Nominal Impedance: 8 ohms Power: 600w rms, 1200w program Freq. Response: 38.0 Hz-2.7 kHz Sensitivity:...

Piping - Medium 7/16"x1/8" White (by foot)

1/8" solid bead with 5/16" staple flange.  7/16" overall size. Sold by the foot. *Due to the fact that this product needs to be cut, there are no returns on this product.

Piping - Medium 7/16"x1/8" Black (by foot)

1/8" solid bead with 5/16" staple flange.  7/16" overall size. Sold by the foot.  Bulk rolls available upon request (~750' per roll). *Due to the fact that this product needs to be cut, there are no returns on this product.

Corner - 2-Leg Wraparound Nickel - Countersunk

2-leg wraparound corner, nickel. 20 gauge steel. For use on 3/4" material covered with vinyl.  ~7/16" radius (fits well on both 3/8" and 1/2" radius cabs). Don't let the price fool you!  You can certainly spend up to 10X the price on "brand...

Capacitor - Polyester Film Box 100V (choose value)

Voltage-Rated: 100VTolerance: ±5%RoHS: Yes The colour may vary between values and/or between orders. Buy in bulk, mixing and matching resistance to save $$$$.

Tolex - Rough/Nubtex Vintage Palomino - By Yard (53" Wide)

MADE IN USA Tolex - Rough/Nubtex Vintage Palomino Choose how your tolex is cut/delivered: Multiple Yards (continuous; rolled) DO NOT choose this option if ordering just one yard.  It will overcharge you by up to $20 on your shipping fees...

Dial Lamp - #44, T-3-¼, 6.3V, .25A, Bayonet Base (Pkg 10)

Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10. Size T-3 1/4 Volts 6.3 Amps 0.25 Candle Power 0.90 Filament Shape C-2R Average Life 3,000 Lamp Number 44 Lamp...

Dial Lamp - #47, T-3-¼, 6.3V, 0.15A, Bayonet Base (Pkg 10)

Package of 10. Long life general replacement lamps for dials, indicators, etc. The #47 bulb is the most common replacement light used today. Used on the vast majority of Fender amps and many others as well. 6.3 Volts, 0.15 Amps. Bayonet Base. Bulb: T-3...