Generic

1/4" Locking TRS Panel Extension Jack - Female-to-Female (black)

Stereo 3-Conductor 1/4" Locking Panel Jack Extension.  Both sides are locking female jacks.  Great for solderless operation underneath your pedalboard! Sold individually.  Does NOT...

1/4" Locking TRS Panel Jack - Black

Stereo 3-Conductor 1/4" Locking Panel Jack. Sold individually.  Does NOT include mounting hardware.

1/4" Locking TRS Panel Jack - Silver

Stereo 3-Conductor 1/4" Locking Panel Jack. Sold individually.  Does NOT include mounting hardware.

Power Cord - C13 to C14 Panel Mount IEC (0.3m)

IEC320 C14 male panel mount to C13 female 90-degree plug.  An excellent way to provide power to your pedalboard internally! Rated for 10A @ 250V.  Does NOT include mounting hardware.

Electronics Wire - 22AWG Stranded, 2-conductor, Zip Cord - Black (by foot)

22AWG tinned stranded soft copper 2-conductor unshielded zip-cord style wire with a flexible soft silicone rubber jacket.  Commonly used for DC power cables for pedals, or for internal wiring...

Hookup Wire - 18AWG UL1015 600V Tinned, Solid - By Foot (Green)

18AWG 600V tinned solid copper wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. Sold by the foot.Qty 1 = 12" long (1' long)Qty 3 = 36" long...

3.5mm Plug - Straight Stereo

3.5mm stereo plug.  Strain relief portion is shrinkable with a heat gun. Fits on 2-Conductor Shielded Wire, for a small and flexible design.

3.5mm Plug - Straight Mono

3.5mm mono plug.  Strain relief portion is shrinkable with a heat gun. Fits on our 20AWG Mini Cable, for a robust 3.5mm cable.  Also fits on 26AWG Coax Wire, for a smaller and more...

N-Style NP2C - 1/4" Mono Straight Plug

Designed after the classic N-style 1/4" mono NP2C 2 conductor plug.  This aftermarket version includes all the benefits of the advanced chuck/strain-relief at a fraction of the cost.

N-Style NP2C - 1/4" Mono Straight Plug - Black

Designed after the classic N-style 1/4" mono NP2C 2 conductor plug.  This aftermarket version includes all the benefits of the advanced chuck/strain-relief at a fraction of the cost.

DC Plug - Right-angle (2.1mm)

2.1mm DC Power Plug for building your own power cables.

DC Plug - Straight (2.1mm)

2.1mm DC Power Plug for building your own power cables.

Transistor - 2SC1815

Current Rating: 0.15AVoltage Rated: 50VTransistor Type: NPN PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Switch - Replacement for Boss Effects Pedals

Replacement for Boss effects pedals, SPST momentary Off-(On), push switch. Mounts in square hole approximately. 55" x.55" x 1.08" overall length including terminals.

Davies Style 1510 Knob - Anodized Aluminum (Choose Colour)

Davies style 1510 knobs, made of solid anodized aluminum with a satin finish.  Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 14mmBase Diameter:...

Davies Style 1900H Knob - Anodized Aluminum (Choose Colour)

Davies style 1900H knobs, made of solid anodized aluminum. Available in a variety of colours.  Sold individually. SPECIFICATIONSOverall Height: 15mmBase Diameter: 12mmIdeal Shaft Fit:...

Transistor Sockets

3-hole transistor socket with gold plated contacts. 3A @ -55C to +125C See alternate photo for dimensional drawing.

PCB Socket Jack - Mono

Cylindrical PCB socket jack.  Grounded always, switching tip lug. Withstand Voltage: 30VDC Min. Maximum Current: 0.3A Temperature Rating: -25°C ~ +70°C

PCB Socket Jack - Stereo

Cylindrical PCB socket jack.  Grounded always, switching tip and ring lugs. Withstand Voltage: 30VDC Min. Maximum Current: 0.3A Temperature Rating: -25°C ~ +70°C

Turret Board - Black, 2mm, for 5e3

230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.