Generic

Washer - Internal Tooth Lock, 1/2"

Internal tooth lock washer with 1/2" (12.7mm) inner diameter.  Compatible with many barrel-style jacks, and some other products.  See individual product descriptions to see if your pot or...

Washer - Internal Tooth Lock, For Pots & Jacks M8

Internal tooth lock washer for M8 pots and jacks.  Compatible with all parts using an M8 (metric) bushing.  See individual product descriptions to see if your pot or jack is compatible...

Push-Push - B250K Split Shaft Pot CLEARANCE

Please note: These are PUSH-PUSH switching pots.  You push it to engage the switch, then push it again to disengage it.  Do not confuse them with the other type.  If you pull on these,...

3mm LED Clip - Clear Plastic

Lightweight Clear Plastic ConstructionSnap-in Mounting StyleSuitable for 3mm and T1 LEDsMounting Hole: 6.35mm (1/4")

5mm LED Clip - Clear Plastic

Lightweight Clear Plastic ConstructionSnap-in Mounting StyleSuitable for 5mm and T1 3/4 LEDsMounting Hole: 6.35mm (1/4")

Nut - #6-32, Keps with external tooth, Zinc (pkg 10)

Most commonly used for mounting tube sockets and other parts to an amp chassis.  Popular low-cost lock nut for multiple commercial and industrial applications.  Auto-locks as it is...

Pickguard - Telecaster 8-Hole, US-spec (choose colour)

These should be a good fit on MOST genuine Fender® MIA and MIM Telecasters® with 8-hole pickguards.  We say "most" because there are quite literally thousands of little variations...

Pickguard - Telecaster 5-Hole, Vintage-spec (choose colour)

These should be a good fit on MOST genuine vintage-style Fender® MIA and MIM Telecasters® with 5-hole pickguards.  We say "most" because there are quite literally thousands of little...

Transistor - J112

N-=channel JFET transistor.  50mA. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - J111

N-=channel JFET transistor.  50mA. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - VN2222

N-=channel MOSFET transistor.  150mA. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N2222A

The 2N2222A NPN transistor. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - 2N3904

Another versatile NPN transistor called for in many circuits. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC547

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC550

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - BC337

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA12

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA18

This is a classic transistor used in many designs over the years. PLEASE NOTE: Never bend the leads in such a way as to apply any stress to the casing.  Always use a heat sink when soldering.

Transistor - MPSA42

This is a classic transistor used in many designs over the years. Current Rating: 0.5AVoltage Rated: 300VTransistor Type: NPN PLEASE NOTE: Never bend the leads in such a way as to apply any stress...

5mm LED - Ultraviolet

5mm UV LED with a water clear lens. Forward voltage (V): 3.4-3.6V